13. Run Flat Tires REPLACEMENT LIMITED …

1 6. Winter TiresDuring winter use, Pirelli recommends the fitment of 4 winter Tires . Please check your vehicle owner s manual concerning winter tire size recommendation. If the winter Tires have a lower speed rating than the original equipment Tires , vehicle handling may be affected, and the vehicle maximum speed must be reduced to the winter tire speed using studded winter Tires , Pirelli recommends that studded Tires be installed on all four positions. Please note that studded Tires are not legal in all states so please check the applicable legal requirements before note, for both winter tire and studded tire usage, if such Tires are applied to the front axle, they must also be applied to the rear Run Flat TiresAlways refer to the vehicle owner s manual with respect to specific safety and operating information relating to the vehicle. Damaged Run Flat Tires or Run Flat Tires that have experienced a loss of pressure should immediately be replaced with another Run Flat tire of identical size and Service Description (Load Index and Speed Symbol).

2 Run Flat Tires have been developed based on the specifications of the vehicles on which they are mounted. Accordingly, Run Flat Tires should only be mounted on vehicles specifically manufactured to accommodate Run Flat Flat Tires must be mounted in conjunction with a functional Tire Pressure Monitoring System (TPMS).The mounting of Tires and installation of the Tire Pressure Monitoring System (TPMS) should be carried out by a specialized Pirelli Pirelli Seal Inside TechnologySelect Pirelli Tires incorporate Seal Inside technology, a construction designed to stop the loss of air from a tire when punctured by an object. The Seal Inside technology is not designed or intended to be a permanent repair. Should the Seal Inside technology be activated, immediately drive your vehicle to a Pirelli dealer for an inspection to determine if repair or REPLACEMENT is needed.

3 Go to for more Pirelli Noise Canceling SystemSelect Pirelli Tires are constructed with Pirelli Noise Canceling System (PNCS). This is a technology that reduces the tire cavity noise, which is one of the major factors generating noise inside the vehicle, and is caused by the vibration of the tire structure when rolling on the road Tire ReplacementThe Tires fitted to your vehicle as Original Equipment were tested and approved by the vehicle manufacturer and the tire manufacturer and take into account all aspects of the vehicle s operation. Changes in the tire size, type or construction should not be made without seeking advice from the vehicle or tire manufacturer or an authorized Pirelli dealer since unapproved Tires on your vehicle could adversely affect steering, handling, braking and traction. The tire information (tire size, load index and speed symbol) as found on the vehicle placard or in the owner s manual should always be followed when replacing Tires .

4 It is strongly recommended that Pirelli Tires be mounted in sets of four with the same tread type. Pirelli Tires should not be mixed with other tire brands. It is necessary to follow this procedure because different tire constructions have different handling characteristics. Tires on the same axle must be the same manufacturer, brand, tire size, load index, speed rating and Pirelli part number. When changing only two Tires on a vehicle which is homogeneously fitted (four Tires of the same tire size), fit the new Tires on the rear axle. This applies to all vehicles regardless of their drive axle. (Front or Rear Drive).On all wheel drive or four wheel drive vehicles the Tires must always be replaced in sets of four. When replacing Tires on light truck vehicles, you should always follow the vehicle manufacturer s recommendations. Passenger and light truck Tires are not interchangeable, due to differences in their pressures and load carrying and Euro-Metric Interchangeability: Euro-Metric (Example: 225/45R17) Tires have a load index which is equal to or greater than that of the same size P-Metric (Example: P225/45R17) tire.

5 Therefore, they have the same or higher load carrying capacity at the maximum rated inflation pressure. Always check with your tire dealer or Pirelli Tire Consumer Affairs to be sure of the exact interchangeability to maintain proper vehicle be aware that it is important that, before fitting the suggested Tires , the fitment is allowed by the technical specifications of the vehicle, the vehicle manufacturer and the relevant homologations. Pirelli does not express any view as to the compatibility of the wheel/tire combination with the technical specifications for the chassis and MAINTAIN VEHICLE DYNAMICS AND LOAD CARRYING CAPACITY, REPLACEMENT Tires MUST ALWAYS HAVE A LOAD INDEX AND SPEED SYMBOL EQUAL TO OR GREATER THAN THOSE FITTED AS ORIGINAL installing plus size fitments, you should consult with the dealer regarding any suspension or braking system modifications which may be recommended for the Tire InspectionAs a minimum, Tires should be examined and air pressure checked monthly and always prior to long trips.

6 They should also be examined if you strike any unusual object on the road. Tires showing bulges, cracks, cuts, penetrations or uneven wear must be dismounted and examined by an authorized Pirelli tire dealer and replaced if necessary. Pirelli Tires have treadwear indicators in the tread grooves, which clearly show when the tread has worn to 2/32" remaining. At this point, your Tires must be replaced because they do not meet the federal minimum tread depth and they may be dangerous if left in should be removed from service for numerous reasons, including tread worn down to minimum depth, damage or abuse (punctures, cuts, impacts, cracks, bulges, underinflation, overloading, etc.). For these reasons, Tires , including spares, should be regularly inspected, , at least once a month. Inspection should occur regardless of whether the vehicle is equipped with a tire pressure monitoring system.

7 In addition to these visual conditions, consumers should take note of and address any change in performance such as increased air loss, noise or vibration or other factors. The mere passage of time (age) does not cause Tires to deteriorate, but rather exposure to outside forces. The service life of a tire is a function of service and storage conditions. For each individual tire, this service life is determined by many factors such as temperature/weather, storage conditions, and service conditions ( , load, speed, inflation pressure, maintenance, and road hazard damage, etc.) to which a tire is subjected throughout its life. Since service and storage conditions vary widely, accurately predicting the service life of any specific tire based on chronological age is not possible. There is no scientific or technical data that establishes or identifies a minimum or maximum service life, but the longer a tire has been in service, the greater the chance that it will need to be replaced due to service-related avoid cosmetic damage, use a mild soap solution to clean sidewalls and rinse off with low pressure tap water.

8 Never apply cleaners or dressings to enhance sidewall appearance to avoid removal of antioxidants, which are intended to prevent ozone degradation. The removal of antioxidants may degrade the rubber and can lead to sidewall cracking. The use of high pressure sprayers may cause sidewall damage. To remove the protective film from a Pirelli tire with white letters, first flood the area with a stream of water from a hose. After a minute or two the film will soften and it can be removed with soft nylon brush if : Driving on a damaged tire is dangerous, as the tire can sud-denly fail, which can lead to an accident and serious personal injury or Tire RotationPirelli recommends that you follow the tire rotation procedure as defined in your vehicle owner s manual. If there is no procedure specified, Pirelli recommends tire rotation every 5,000 to 7,000 miles to optimize your tire Tire Repair Punctures, nail holes or cuts located in the tread area of Pirelli Tires may be repaired if the diameter does not exceed 1/4.

9 " The repair material used must seal the innerliner and fill the injury to be considered a permanent repair. Tire Manufacturers Association and industry approved repair methods include a combination of a plug and a patch; chemical or hot vulcanizing patches, and head type plugs; all which are applied from inside the tire. A self-vulcanizing plug repair may be used only in conjunction with a patch repair, but not by itself. Plugs may cause further damage to the tire, they are not always airtight and the plug may fail. If a tire puncture exceeds 1/4" or is located in the shoulder or sidewall deflection areas, the tire must be replaced. Never resort to tubes in tubeless Tires or sleeves or large thick patches, which can upset the balance and may result in a sudden failure at highway speeds and high operating : Driving on an improperly repaired tire is dangerous, as the tire can suddenly fail, which can lead to an accident and serious personal injury or PROHIBITS THE FOLLOWING FOR SAFETY REASONS:1) The use of aftermarket tire sealants in Pirelli Tires to repair, even temporarily, a puncture;2) The repairing of V, W, Y or Z Speed Rated Tires ;3) The repairing of Run Flat or PNCS StorageShould you need to store Tires they should be stored indoors in a cool, dry place.

10 Tire storage areas should be cool (45 F ~ 75 F), dry, non-dusty, and moderately well ventilated. To protect your Tires from damage related to: heat, water, ozone and direct sunlight, it is suggested you place them in opaque, waterproof containers ( , plastic trash bags). It is vital that the Tires do not come in contact with sources of heat and/or ozone radiators, electric generators/motors, hot pipes, etc. and Tires should never be allowed to stand or come into contact with water, grease, fuels, brake fluid or any other chemicals. If you need to transport your Tires please follow the above : Driving on an improperly stored tire is dangerous, as the tire can suddenly fail, which can lead to an accident and serious personal injury or Tubes in Tubeless TiresUnder no circumstances are tubes to be used in Pirelli Tires marked Tubeless. This includes Tires that have been repaired. If the tire s pressure retention ability has been affected, so as to necessitate a tube being installed, the tire must be Tire ValvesWhenever new Tires are installed on your wheels, new tire valves of the correct type must be installed.