188f FX3U Hardware A4編集用 - infinityfa.com

1 fx3u SERIES PROGRAMMABLE CONTROLLERS Hardware MANUALThis manual describes the part names, dimensions, mounting,cabling and specifications for the product. This manual is extractedfrom fx3u Series User's manual - Hardware Edition. Refer to FX3 USeries User's manual - Hardware Edition for more details. Beforeuse, read this manual and manuals of relevant products fully toacquire proficiency in the handling and operating the product. Makesure to learn all the product information, safety information, , store this manual in a safe place so that you can take it out andread it whenever necessary. Always forward it to the end company name and the product name to be described in thismanual are the registered trademarks or trademarks of Mar. 2007 Specifications are subject to change without notice. 2005 Mitsubishi Electric CorporationSafety Precaution (Read these precautions before use.)

2 This manual classifies the safety precautions into two categories: and .Depending on the circumstances, procedures indicated by may also cause severe is important to follow all precautions for personal standardPlease consult with Mitsubishi Electric for the information on marinestandard practices and the corresponding types of NumberJY997D18801 RevisionFDateMarch 2007 Indicates that incorrect handling may causehazardous conditions, resulting in death orsevere that incorrect handling may causehazardous conditions, resulting in medium orslight personal injury or physical AND MAINTENANCE PRECAUTIONS Do not touch any terminal while the PLC's power is so may cause electric shock or malfunctions. Before cleaning or retightening terminals externally cut off allphases of the power to do so may cause electric shock.

3 Make sure to connect the battery for memory backup not charge, disassemble, heat, short-circuit, or expose thebattery to so may rupture or ignite it. Before modifying or disrupting the program in operation orrunning the PLC, carefully read through this manual and theassociated manuals and ensure the safety of the operation error may damage the machinery or cause AND MAINTENANCE PRECAUTIONS Turn off the power to the PLC before attaching or detaching thememory cassette. If the memory cassette is attached ordetached while the PLC's power is on, the data in the memorymay be destroyed, or the memory cassette may be damaged. Do not disassemble or modify the so may cause fire, equipment failures, or repair, contact your local Mitsubishi Electric distributor. Turn off the power to the PLC before connecting or disconnectingany extension to do so may cause equipment failures or malfunctions.

4 Turn off the power to the PLC before attaching or detaching thefollowing to do so may cause equipment failures or Display module, peripheral devices, expansion boards, and special adapters- Connector conversion adapter, extension blocks, and FX Series terminal blocks- Battery and memory cassetteDISPOSAL PRECAUTIONS Please contact a certified electronic waste disposal companyfor the environmentally safe recycling and disposal of AND STORAGE PRECAUTIONS Before transporting the PLC, turn on the power to the PLC tocheck that the BATT LED is the PLC is transported with the BATT LED on or the batteryexhausted, the battery-backed data may be unstable duringtransportation. The PLC is a precision instrument. During transportation, avoidimpacts larger than those specified in Section Failure to doso may cause failures in the transportation, verify the operations of the of UL, cUL standardsFX3U main units and input/output extension units/blocks supportingUL, cUL standards are as follows:UL, cUL file number :E95239 Models :MELSEC fx3u series manufacturedFX3U- MR/ES(-A) fx3u - MT/ES(-A) fx3u - MT/ESSW here indicates:16,32,48,64,80,128FX3U- MR/DSFX3U- MT/DSFX3U- MT/DSSW here indicates:16,32,48,64,80FX3U-232 ADPFX3U-485 ADPFX3U-4AD-ADPFX3U-4DA-ADPFX3U-4AD-PT-A DPFX3U-4AD-TC-ADPFX3U-4 HSX-ADPFX3U-2 HSY-ADPM odels :MELSEC FX2N series manufacturedFX2N- ER-ES/ULFX2N- ET-ESS/ULWhere indicates.

5 32,48FX2N-48ER-DSFX2N-48ET-DSSFX2N-48ER- UA1/ULFX2N-8ER-ES/ULFX2N-8EX-ES/ULFX2N-8 EYR-ES/ULFX2N-8 EYT-ESS/ULFX2N-8EX-UA1/ULFX2N-16EX-ES/UL FX2N-16 EYR-ES/ULFX2N-16 EYT-ESS/ULCompliance with EC directive(CE Marking )This document does not guarantee that a mechanical systemincluding this product will comply with the following to EMC directive and LVD directive of the entiremechanical system should be checked by the user / more details please contact the local Mitsubishi Electric for Compliance with EMC directiveThe following products have shown compliance through directtesting (of the identified standards below) and design analysis(through the creation of a technical construction file) to the EuropeanDirective for Electromagnetic Compatibility (89/336/EEC) when usedas directed by the appropriate :Programmable Controller (Open Type Equipment)Models :MELSEC fx3u series manufacturedfrom May 1st, 2005FX3U- MR/ES(-A)Where indicates:16,32,48,64,80FX3U-4 HSX-ADPFX3U-2 HSY-ADPFX3U-FLROM-16FX3U-FLROM-64 LFX3U-7 DMfrom June 1st, 2005FX3U-232 ADPFX3U-485 ADPFX3U-4AD-ADPFX3U-4DA-ADPFX3U-4AD-PT-A DP fx3u -4AD-TC-ADPFX3U-232-BDFX3U-422-BDFX3 U-485-BDFX3U-USB-BDFX3U-FLROM-64FX3U-CNV -BDfrom November 1st, 2005 fx3u - MT/ES(-A) fx3u - MT/ESSW here indicates:16,32,48,64,80from February 1st, 2006FX3U-128MR/ES(-A) fx3u -128MT/ES(-A) fx3u -128MT/ESSFX3U- MR/DSFX3U- MT/DSFX3U- MT/DSSW here indicates:16,32,48,64,80 Models.

6 MELSEC FX2N series manufacturedfrom July 1st, 1997FX2N- ER-ES/UL FX2N- ET-ESS/ULWhere indicates:32,48FX2N-16EX-ES/UL FX2N-16 EYR-ES/ULFX2N-16 EYT-ESS/ULfrom April 1st, 1998FX2N-48ER-DSFX2N-48ET-DSSfrom August 1st, 1998 FX2N-48ER-UA1/ULfrom August 1st, 2005 FX2N-8ER-ES/ULFX2N-8EX-ES/ULFX2N-8 EYR-ES/UL FX2N-8 EYT-ESS/ULFor the products above, PLCs manufacturedbefore March 31st, 2002 are compliant with EN50081-2 (EN61000-6-4) and EN50082-2from April 1st, 2002 to April 30th, 2006 are compliant with EN50081-2 (EN61000-6-4) and EN61131-2:1994+A11:1996+A12:2000after May 1st, 2006 are compliant with EN61131-2:2003 StandardRemarkEN61131-2:2003 Programmable controllers- Equipment requirements and testsCompliance with all relevant aspectsof the standard. Radiated Emissions Mains Terminal Voltage Emissions RF immunity Fast Transients ESD Surge Voltage drops and interruptions Conducted Power magnetic fieldsStandardRemarkEN61000-6-4:2001- Generic emission standardIndustrial environmentEN50081-2:1993 ElectromagneticcompatibilityCompliance with all relevant aspectsof the standard.

7 Radiated Emissions Mains Terminal Voltage EmissionsEN50082-2:1995 Electromagneticcompatibility- Generic immunity standardIndustrial environmentCompliance with all relevant aspectsof the standard. RF immunity Fast Transients ESD Conducted Power magnetic fieldsEN61131-2:1994 /A11:1996 /A12:2000 Programmable controllers- Equipment requirements and testsCompliance with all relevant aspectsof the standard. RF Immunity Fast Transients ESD Damped oscillatory waveEN61131-2:2003 Programmable controllers- Equipment requirements and testsCompliance with all relevant aspectsof the standard. Radiated Emissions Mains Terminal Voltage Emissions RF immunity Fast Transients ESD Surge Voltage drops and interruptions Conducted Power magnetic fieldsJY997D18801F(ENGLISH)Requirement for Compliance with LVD directiveThe following products have shown compliance through directtesting (of the identified standards below) and design analysis(through the creation of a technical construction file) to the EuropeanDirective for Low Voltage (73/23/EEC) when used as directed by theappropriate :Programmable Controller (Open Type Equipment)Models :MELSEC fx3u series manufacturedfrom May 1st, 2005FX3U- MR/ES(-A)Where indicates:16,32,48,64,80from November 1st, 2005 fx3u - MT/ES(-A) fx3u - MT/ESSW here indicates.

8 16,32,48,64,80from February 1st, 2006FX3U-128MR/ES(-A) fx3u -128MT/ES(-A)FX 3U-128MT/ESSFX3U- MR/DSWhere indicates:16,32,48,64,80 Models :MELSEC FX2N series manufacturedfrom July 1st, 1997FX2N- ER-ES/UL FX2N- ET-ESS/ULWhere indicates:32,48FX2N-16 EYR-ES/ULfrom April 1st, 1998FX2N-48ER-DSfrom August 1st, 1998 FX2N-48ER-UA1/ULfrom August 1st, 2005 FX2N-8ER-ES/ULFX2N-8 EYR-ES/ULFor the products above, PLCs manufacturedbefore March 31st, 2002 are compliant with IEC1010-1from April 1st, 2002 to April 30th, 2006 are compliant with EN61131-2:1994+A11:1996+A12:2000after May 1st, 2006 are compliant with EN61131-2:2003 Caution for compliance with EC DirectiveInstallation in EnclosureProgrammable logic controllers are open-type devices that must beinstalled and used within conductive control boxes.

9 Please use theFX3U Series programmable logic controllers while installed inconductive shielded control boxes. Please secure the control box lidto the control box (for conduction). Installation within a control boxgreatly affects the safety of the system and aids in shielding noisefrom the programmable logic for Analog Products in useThe analog special adapters have been found to be compliant to theEuropean standards in the aforesaid manual and directive. However,for the very best performance from what are in fact delicatemeasuring and controlled output device Mitsubishi Electric would liketo make the following points;As analog devices are sensitive by nature, their use should beconsidered carefully. For users of proprietary cables (integral withsensors or actuators), these users should follow thosemanufacturers installation Electric recommend that shielded cables should be NO other EMC protection is provided, then users may experiencetemporary induced errors not exceeding +10%/-10% in very heavyindustrial , Mitsubishi Electric suggest that if adequate EMCprecautions are followed with general good EMC practice for theusers complete control system, users should expect normal errorsas specified in this Sensitive analog cable should not be laid in the same trunking or cable conduit as high voltage cabling.

10 Where possible users should run analog cables Good cable shielding should be used. When terminating the shield at Earth - ensure that no earth loops are accidentally When reading analog values, EMC induced errors can be smoothed out by averaging the readings. This can be achieved either through functions on the analog special adapter/block or through a users program in the fx3u Series PLC main manualsFX3U Series PLC (main unit) comes with this document (hardwaremanual).For a detailed explanation of the fx3u Series Hardware andinformation on instructions for PLC programming and specialextension unit/block, refer to the relevant to obtain manualsFor the necessary product manuals or documents, consult with theMitsubishi Electric dealer from where you purchase your :2003 Programmable controllers- Equipment requirements and testsThe equipment has been assessedas a component for fitting in asuitable enclosure which meets therequirements of EN61131-2:2003 StandardRemarkIEC1010-1:1990 /A1.