2.1 Reflection

1 Fritz Albregtsen 2008 2 Reflection , refraction, diffraction, and scattering In this chapter we will describe how radiation is reflected off a surface, transmitted into a medium at a different angle, how it is influenced by passing an edge or through an aperture, and how it is scattered and spread out by interactions with particles at various scales. We will focus on the propagation of light. In order to describe the direction in which light propagates, it is often convenient to represent a light wave by rays rather than by wave fronts. In fact, rays were used to describe the propagation of light long before its wave nature was established.

2 Geometrically, the duality is easy to handle: Whenever we indicate the direction of propagation of light by a ray, the wave front is always locally perpendicular to the ray. Reflection Figure 2-1. Spheres reflected in the floor and in each other. Reflection occurs when a wave hits the interface between two dissimilar media, so that all of or at least part of the wave front returns into the medium from which it originated. Common examples are Reflection of light, as shown in figure 2-1, as well as Reflection of surface waves that may be observed in a pool of water, or sound waves reflected as echo from a wall. Reflection of light may be specular or diffuse.

3 The first occurs on a blank mirroring surface that retains the geometry of the beams of light. The second occurs on a rougher surface, not retaining the imaging geometry, only the energy. 2-2 Reflection , refraction, diffraction, and scattering Fritz Albregtsen 2008 Reflectance Reflectance is the ratio of reflected power to incident power.

4 Generally expressed in decibels or percent. Most real objects have some mixture of diffuse and specular qualities, and surface reflectance is therefore often divided into diffuse and specular reflectance. In climatology, reflectivity is called albedo. Diffuse Reflection When light strikes a rough or granular surface, it bounces off in all directions due to the microscopic irregularities of the interface, as illustrated in figure 2-2. Thus, an image is not formed. This is called diffuse Reflection . The exact form of the Reflection depends on the structure of the surface. Figure 2-2. Diffuse Reflection from a rough surface.

5 A common model for diffuse Reflection is Lambertian reflectance, in which the light is reflected in accordance with Lambert's cosine law, see figure 2-3. Lambert's cosine law says that the total radiant power observed from a "Lambertian" surface is directly proportional to the cosine of the angle between the observer's line of sight and the surface normal. The law is also known as the cosine emission law or Lambert's emission law (Johann Heinrich Lambert, Photometria, 1760). When an area element is radiating as a result of being illuminated by an external source, the irradiance (energy/time/area) landing on that area element will be proportional to the cosine of the angle between the illuminating source and the normal.

6 A Lambertian reflector will then reflect this light according to the same cosine law as a Lambertian emitter. This means that although the radiance of the surface under diffuse Reflection depends on the angle from the normal to the illuminating source, it will not depend on the angle from the normal to the observer. Imaging 2-3 Fritz Albregtsen 2008 An important consequence of Lambert's cosine law is that when an area element is viewed from any angle, it has the same radiance.

7 Although the emitted power from an area element is reduced by the cosine of the emission angle, the observed size of the area element is also reduced by that same amount, so that while the area element appears smaller, its radiance is the same. Figure 2-3. Emission rate (photons/s) in a normal and off-normal direction. The number of photons/sec directed into any wedge is proportional to the area of the wedge. specular (mirror-like) Reflection We describe the directions of the incident ray hitting an optical surface and the ray being reflected from the surface in terms of the angle they make with the normal (perpendicular) to the surface at the point of incidence, as shown in figure 2-4.

8 In specular Reflection , the angle of incidence i equals the angle of Reflection r. Figure 2-4. Reflection from a mirror. A mirror is the most common example of specular light Reflection . It usually consists of a glass sheet in front of a metallic coating where the Reflection actually occurs. Reflection also occurs from the surface of transparent media, such as water or glass. 2-4 Reflection , refraction, diffraction, and scattering Fritz Albregtsen 2008 In fact.

9 Reflection of light may occur whenever light travels from a medium of a given refractive index into a medium with a different refractive index. In the most general case, a certain fraction of the light is reflected from the interface, and the remainder is refracted as it passes into the transparent medium. When light reflects off a material denser than the external medium, it undergoes a 180 phase reversal. In contrast, a less dense, lower refractive index material will reflect light in phase. This is an important principle in the field of thin-film optics. specular Reflection at a curved surface forms an image which may be magnified or demagnified.

10 We will shortly return to the subject of curved mirrors and geometric optics. Perfect mirrors A perfect mirror is a theoretical mirror that reflects light (and electromagnetic radiation in general) perfectly, and doesn't transmit it. Domestic mirrors are not perfect mirrors as they absorb a significant portion of the light which falls on them. Dielectric mirrors are glass or other substrates on which one or more layers of dielectric material are deposited, to form an optical coating. A very complex dielectric mirror can reflect up to of the light incident upon it, for a narrow range of wavelengths and angles. A simpler mirror may reflect of the light, but may cover a broader range of wavelengths.