Transcription of 2001 LEXUS IS 300 - scosche.com
1 155 2000 SCOSCHE INDUSTRIES, INC. ALL RIGHTS RESERVEDFOR MORE INFORMATION VISIT CALL SCOSCHE INDUSTRIES, INC. AT 800-363-44902001 LEXUSIS 300 NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH. ABSOLUTEACCURACY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCEGUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY : 2001 Make:LexusModel: IS300IN-DASH APPLICATION:Dash Type: DoubleDINKit: LS2075 Harness: TAO3 Antenna Adapter: None neededFactory Amplifier:Passenger KickFRONT SPEAKERS:Front Door:6 1/2" 4-Hole Speaker, and 1 3/8" TweeterREAR SPEAKERS:Rear Deck:6 x 9" 4-Hole SpeakerWhen installing an aftermarket 5 or 6 speakers, a speaker adapter is needed. We recommend theScosche SA69 speaker COLOR CODES:+12V Constant =+12V Accessory Switched =-12V Chassis Ground =+12V Illumination =+12V Dimmer =LF+ =LF- =RF+ =RF- =LR+ =LR- =RR+ =RR- =156 2000 SCOSCHE INDUSTRIES, INC.
2 ALL RIGHTS RESERVEDFOR MORE INFORMATION VISIT CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490 NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH. ABSOLUTEACCURACY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCEGUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY LEXUS is300 SedanPRELIMINARY: Disconnect the negative battery : Is a fuba style antenna atop the rear of REMOVAL AND IN-DASH INSTALLATION:Note: The factory radio provision is for a Double DINsized radio. Kit is LS20751. Remove bottom panel containing traction control using panelremoval Using small pick, remove felt fray from top panel, extract (2)Philips head screws. Pull out top panel by pulling Extract (4) 10mm bolts securing radio, Disconnect DOOR SPEAKER INSTALLATION:Note: The factory speaker provision is for a 6 Extract (1) Philips head screw from door Extract (1) Philips head screw from behind screw cover indoor opener Use panel removal tool to try door lose, disconnect andremove Drill out (3) rivets securing speaker, disconnect and and SPEAKER INSTALLATION:Note: The factory speaker provision is for a 6" x 9"standard mounted directly to Pull up on front portion of bottom cushion and Remove (6) 10mm bolts from ski passage on back of seatcushion in Remove (2) 10mm bolts bottom of top cushion and Remove (3) child seat anchors by extracting 12mm boltsunder Pry up rear deck and pull out to Extract (4) 10mm bolts securing speaker disconnect andremove.
