2300K - IRPC

1 REV. 20110601 P r o d u c t D a t a s h e e t 2 30 0K Description: 2300K is a Polypropylene Block copolymer resin for injection molding process with medium flow and high impact. It is suitable for the production of general parts such as furniture, house-ware, container s closure and auto-part. It also meets the requirement in the code of federal regulations in 21 CFR for food contact. Physical Properties: Method Unit Value Melt Flow Index ( kg/230 C) ASTM D1238 g/10min. 4 Tensile Strength at Yield ASTM D638 N/mm2 28 Elongation at Yield ASTM D638 % 11 Charpy Notched Impact Strength (at -20 C) DIN 53453 mJ/mm2 Flexural Modulus (1% SECANT) ASTM D790 MPa 1300 Rockwell Hardness ASTM D785 R-Scale 98 Heat Distortion Temperature (Load N/mm2) ASTM D 648 C 98 Processing Technique Processing Temperature : 190 240 C **However, the actual processing conditions depend on mold design, power of machine, equipment and other environments.

2 ** Remark: The values presented on the above are typical laboratory average, not to be construed as specifications and may vary within moderate ranges. The applicability or the accuracy of this information or the suitable of our products cannot be guaranteed because the conditions of use on the part or our uses are beyond our control. P o l y p r o p y l e n e ( P P )