3 Medium Pipe - Metalcorp Steel

1 Medium Pipes. Steel pipe - Medium - AS1074 & AS/NZS1163 C250L0. Nominal Outside Wall Quantity Common Oiled/Painted/PreGal Hot Dipped Galvanized Sling Size Diameter Thickness per Sling Description Plain Ends. Dimension (NB) mm mm kg/m Sling Mass kg/m Sling Mass mm x mm 10 * 217 Medium 300 x 260. * This item is sourced locally and supplied as (ETC) x and to an in house specification - TS22. 15 # 217 Medium 362 x 316. # Item no longer offered in screwed ends and may also be subject to any minimum order quantities. 20 127 Medium 350 x 306. 25 91 Medium 371 x 326. 32 61 Medium 382 x 336.

2 40 61 Medium 435 x 383. 50 37 Medium 422 x 374. 65 37 Medium 533 x 472. 80 19 Medium 445 x 397. 90 19 Medium 508 x 454. 100 19 Medium 572 x 510. 125 13 Medium 699 x 382. 150 10 Medium 660 x 451. The above Medium pipe sections are no longer offered in an End Finish other than Plain Ends. Other End Finishes such as Screwed One/Both Ends or Screwed and Socketed may be sublect to minimum ordering requirements. Sizes 25NB to 150NB may be ordered in a RED painted finish for use in the Fire Protection Industry. Unless noted, pipes are supplied as metre lengths Please note, Special length requirements may be subject to minimum ordering requirements.

3 Tip:- Galvanized pipe that needs to be powder coated, should be first degassed to avoid "cratering" of the finished surface. Tip:- The minimum suggested bending radius is 6 times the outside diametre of the pipe based on the centreline of the bend radius. Manufactured to Australian Standards: Dual Specifications - AS 1074 and AS/NZS 1163 C250L0. Coatings: Painted products are coated with an Alkyd modified acrylic primer paint to a target thickness of 12 microns. The average is 8-10 microns. Hot Dipped Galvanized pipes are galvanized to Section 2 of AS/NZS 4792 HDG 300 and have a minimum coating mass of 300 g/m.

4 End Colour Coding Medium Blue The information contained in this brochure is provided by way of general information only, and should not be relied upon by any person. You must seek specific advice as to the suitability of the products featured in this brochure for the purpose for which, and the manner in which, you propose to use them. This may involve further independent analysis and testing. Metalcorp Steel , and its related bodies corporate take no responsibility for any adverse consequences of any nature which arise as a result of reliance on this brochure 2014. Metalcorp is a registered trademark of BlueScope Steel Limited (ABN 16 000 011 058).