3L DMV Series 50-250W Cl. II, Groups E, F, G; Cl. III ...

1 3L DMV Series 50-250W Cl. I, Div. 2, Groups A, B, C, D. Restricted Breathing Cl. I, Div. 2. Cl. II, Groups E, F, G; Cl. III &. Simultaneous Presence For Combustible Dusts & Zone 2 (Suffix S826) (175W max). Certified for IEC Zone 2 Marine & Wet Locations Champ Luminaires (Suffix S826TB) 3, 3R, 4, 4X; IP66. Applications: Options: DMV Series Champ luminaires are used: The following special options are available In applications made hazardous by the from the factory by adding suffix to luminaire presence of combustible dusts Cat. No.: Description Suffix In areas in which ignitible concentrations of Restricted Breathing Construction.

2 S826. flammable gases or vapors will be present Class I, Division 2 & Zone 2. only due to abnormal, unusual, or accidental Suitabilty conditions Cooler Operating Temperatures In marine applications where water spray (T-Numbers). and corrosive atmospheres are Restricted Breathing/Non-Sparking .. S865. considerations Class I, Division 2 & Zone 2. In areas where combustible dusts and Provides T3 code without conduit flammable vapors are present or cable seals simultaneously Certified for IEC Zone 2 .. S826TB. Furnished with terminal block, In elevated ambient temperatures often crimp terminals and dedicated found in industrial applications voltage ballasts (no MT, DT or TT).

3 In installations where moisture, dirt, dust, Fused to protect ballast and vibration, corrosion and rough usage are capacitors against abnormal line problems conditions .. S658*. Wherever the damaging effects of wind, (Not available with /MT Ballast). Grounding wire for safety. snow, sleet, or hot sun are found (Not for use in Canada). Ballasts available in voltages of 120, 208, (Not suitable for marine applications). In grain handling, storage and processing 240, 277, 347, 480, 600 and multi-tap.* Quick-Clip - Holds weight of housing plants, coal preparation plants, coal conveying areas, food processing plants, when closed.

4 No need to support manufacturing plants, refineries, chemical, Certifications and luminaire while screwing the housing petrochemical, and other industrial process Compliances: to the cover .. S890. facilities, waste or sewage treatment Ballast-Gard starter cut-out switch NEC/CEC: facilities, offshore, dockside, and harbor prevents starter pulsing when lamp Class I, Division 2, Groups A, B, C, D is cycling or inoperative; prolongs installations, and other heavy industrial 175W max Class II, Class III & ballast and ignitor life. Available for applications Simultaneous Presence (Class I, Division 2 use with 50 150W LX HPS only.)

5 Features: and Class II) BG. Cast copper-free aluminum construction Class I, Zone 2 Instant restrike enables a hot HPS. (less than of 1% copper) and epoxy IEC: lamp to immediately restrike after a powder finish provide excellent resistance momentary loss of arc due to Zone 2 Ex nR IIC. to corrosion. voltage fluctuation or power outage. UL Standards: It has no effect on the warm-up Seven mounting arrangements to suit any 844 Hazardous (Classified) Locations period of cold lamps. lighting layout pendant, flexible pendant, 1598 Luminaires 50 150W LX HPS only .. IR. ceiling, wall bracket, angle stanchion, 1598A Marine Locations Quartz auxiliary lighting comes straight stanchion, and quad- mount .

6 3L. to full brightness immediately and Wide range of light sources and wattages CSA Standards: remains lit until the HID lamp attains to meet specifiers' needs: 50, 70, 100, 150 No. 137 60 70% of full illumination. For watt high pressure sodium (HPS); 70, 100, IEC Standards: non-hazardous locations only. (Note: 175, 250 watt metal halide. QTZ lamp not included; use 100W. 60079-15. Hinged ballast housing for ease of single ended lamp Q100DC, installation and maintenance. Standard Materials: Q100CL/DC, or 100Q/CL/DC). All luminaires designed to perform in a 40 C Ballast housings and mountings copper- Consult factory for top-hat ambient temperature.

7 Selected luminaires free aluminum (less than of 1% copper) limitations .. QTZ. are suitable for ambient temperatures up to Factory assembled with lamps Guard and exterior hardware stainless 65 C. installed for additional labor savings steel Superior gasketing seals between the FA. Reflectors (dome and angle) Krydon TEFLON coated globe for additional mounting module, housing, and optical fiberglass-reinforced polyester material assembly for optimum performance in wet protection against breakage. For use and corrosive environments. Globes heat and impact resistant, with 50 150W HPS and 70 175W. internally fluted glass MH (G303 only).

8 S808. Hubs with an integral conduit stop and Note: Some T-numbers (operating temperatures) change. bushing to help prevent damage to field Standard Finishes: See "Temperature Performance Data" section. wiring during installation. Stainless steel insert top hat with Copper-free aluminum epoxy powder Low ambient capability to ( 40 C.) coat stainless steel threaded insert to Dome and 30 angle reflectors made of Krydon material high reflectance white attach ballast housing .. S806. bright white Krydon material provide Note: BG and IR options cannot be used together. IR and Stainless steel natural QTZ options cannot be used together.

9 Superior reflectivity, with twist-on feature requiring no tools or additional hardware. Electrical Ratings: Accessories: Will not chip, peel, dent, rust, or corrode. 120, multi-tap* (120, 208, 240 and 277), See pages 1022 1023 for complete listing. Mogul base porcelain lamp socket. tri-tap (120, 277, 347) 480, 600 volts TEFLON is a registered trademark of duPont Co. Stainless steel open bottom guard permits 50 250W HPS; 70 250W MH *When ordering fuses for luminaires, option S658, you direct access to the globe for easy must specify the operating voltage. S658 cannot be relamping. ordered with /MT in the catalog number.

10 US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2015 Eaton's Crouse-Hinds Business DMV Series 50-150W Cl. I, Div. 2, Groups A, B, C, D. Restricted Breathing Cl. I, Div. 2. Cl. II, Groups E, F, G; Cl. III. & Simultaneous Presence 3L. High Pressure Sodium & Zone 2 (Suffix S826) Marine & Wet Locations Certified for IEC Zone 2 (Suffix 3, 3R, 4, 4X; IP66. For Combustible Dust Applications S826TB). Champ Luminaires To complete the catalog #, include information in notes 1, 2 and 3 below. For guards and other optics see DMV Series - Ordering By Components page. BASIC CATALOG NUMBER. Mounting Hub Lamp With G303 Globe With GR305 Glass Style Size Watts and P33 Guard Refractor *.