4-Band Puzzle Ring Instructions except 4C3, 4CH, and 4CHWB

1 4-Band Puzzle ring Instructions except 4C3, 4CH, and 4 CHWB. 1. Hold band stamped 2. Bring band stamped 3. Grasp band stamped 4. With your free hand 5. Holding the 3 band 6. Continue turning band 7. The 3 and 4 bands 1 (rounded outside 2 (other outside 4 in your right hand take the band between your thumb until you have should fit together, band ) with the irregular band ) up against 1 with the stamp facing stamped 3 (it should and forefinger, twist completed a 180- holding the two portion up and in your band forming you and the flat part of be hanging at the band clockwise from degree rotation. outside bands ( 1 and left hand. diamond shape. Note- the band up, allowing bottom) by the flat the top. 2 ). these are the outside the 1 and 2 bands part of the band and bands when the ring is to fall to one side. If bring it up towards the assembled. you're right-handed 4 band until the you may want to bands are almost transfer the 4 band against one another.

2 To your left hand. 8. When the previous step 9. Take the first loose 10. When you have 11. Bring band up and fit 12. Flip ring over and 13. When you have 14. Congratulations, you is completed, 3 and band on the same side completed the against 3 and 4 . rotate 1 until the completed the have assembled your 4 create an X when which is 2 and rotate rotation, be sure that irregular part of the rotation, bring 1 ring . viewed from the top. the band until the the V shaped part band is on the inside. band up against the irregular shaped part is on the inside of the other three bands. on the inside of the ring is over the ring . remaining loose band . Copyright 2015 Puzzle ring Emporium Reprinting and distribution allowed only with the express written permission of Puzzle ring Emporium For more information visit