5 x 20mm Fuses - Cooper Industries

1 Description Time-delay, low breaking capacity Optional axial leads available 5 x 20mm physical size Glass tube, nickel-plated brass endcap construction Designed to IEC 60127-2/3 (32mA-10A) & Information UL Recognized Card: Guide JDYX2, File E19180 CSA Component Acceptance: File 1803366 cURus Recognition: Guide JDYX8, File E19180 SEMKO Approval: File 507078, 415434, 806492 VDE Approval: File 40011926 BSI Approval: File KM55676 IMQ Approval: File E1921, PSE/JET: File JET1641-31003-1005, JET1641-31003-1006 CCC Approval: File 2005010207155693,2002010207011294 OrderingSpecify product code Insert packaging code prefix before part number.

2 BK/S506-1-RSpecify option code if desired For axial leads, insert V between catalog series and amp rating. BK/S506-V-2-RDimensions - mmDrawing Not to ScaleS506 Electrical In4 In10 InInmaxminmaxminmaxminmax32mA-100mA 2 min 200 ms 10 sec 40 ms3 sec10 ms 300 min 600 ms 10 sec 150 ms 3 sec20 ms 300 ms8A-15A2 min 600 ms 10 sec 150 ms 3 sec20 ms 300 ms5 x 20mm Fuses S506 Series, Time-Delay, Glass Tube0709 BU-SB08673 Page 1 of 2 Data Sheet 4332 SpecificationsVoltageInterrupting RatingTypical DCTypical TypicalAgency ApprovalsProductRating(amps) at RatedCold Resistance Melting I2t Voltage IMQ VDE BSI SEMKO UR CCC PSE/ CSA cURusCodeVacVoltage (50Hz) Vac( )*(amps) Drop (mV)

3 X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X XXX X X X XXX X X X XXX X X X XXX X X X XXX X X X XXX X X X XXX X X X XXX X X X XXX X X X XXXX X XXXX * DC Cold Resistance (measured at <10% of rated current) Typical Voltage Drop (voltage drop was measured at 20 C ambient temperature at rated current) Ratings above 4A have a diameter leadNominal Time-Current Characterisitics of S506-RPackaging CodePackaging Code SuffixDescriptionBK100 Fuses packed into a cardboard cartonBK11,000 Fuses packed into a poly bagTR21,500 Fuses packed into tape on a reel ( lead wire length)Option CodeOption CodeDescriptionVAxial leads - copper tinned wire with nickel plated brass endcaps 2009 Cooper BussmannSt.

4 Louis, MO BU-SB08673 Page 2 of 2 Data Sheet 4332 The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin isintended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to changedesign or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information containedin this bulletin.

5 Once a product has been selected, it should be tested by the user in all possible Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life supportsystems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result insignificant injury to the user.