7 Spray Painting with Nitrogen - Fira de Barcelona

1 Spray Painting with NitrogenAn international patent ofHow the Nitotherm technology was The Italian company that developed and patented the technology and the equipment: Eurosider SAS di Ottavio Milli & C, Grosseto Italy, has been dealing with gas separation since the 80s: from Oxygen for Hospitals to Carbon Dioxide for soft drinks to Nitrogen for Oil drilling or for wineries. The application for coating was the outcome of a fortunate finding!The Discover An Italian company located in Tuscany specialized in helmets for bikers production had big problems in coating the helmets for paint sagging issues and was offered a Nitrogen generator for testing. All the issue of sagging disappeared immediately by using air enriched of Nitrogen and it was also noted that in the warmest hours of the day the finishing was also better off than the early Nitrotherm technology took shape.

2 It was the year 2003 WHAT IS Nitrogen ? Nitrogen is the chemical element that has the atomic number 7 (corresponding to the proton number contained in the atomic nucleus). Nitrogen is the fundamental constituent element of the most important organic molecules from a biochemical point of view (DNA, proteins, few vitamins), as well as of widely spread and very important inorganic components like ammonia and nitric acid. The molecular Nitrogen (N2, consisting of two Nitrogen atoms) is a colorless, odorless, tasteless and inert gas constituting 78% by volume of Earth s atmosphere (is the most widely spread gas in the air).Production and supply of NitrogenNitrogen, a widely used industrial gas, is produced in liquid and gaseous formsby means of:A) cryogenic separation of air: compression and decompression of air until itliquefies. Using different boiling points, the components of air are separatedin a distillation ) (Pressure Swing Adsorption): generators having minimum twoabsorbers filled with molecular sieve (CMS).

3 Compressed air, previouslytreated to eliminate oil, moisture and dust, is alternately passed through theabsorbers producing Nitrogen . While compressed air is passed through acontainer producing gas, the other one is regenerated by exhausting thegasses previously adsorbed at atmospheric pressure. The process is repeatedin a cyclic ) membrane separation: technology using the hollow fibers polymermembranes to separate the gaseous Nitrogen from air using the selectivepermeation of the the Nitrogen enriched flow is obtained?The composition of the atmospheric air: 78% Nitrogen , 21% oxygen and 1% trace polymeric membrane ( molecular discriminator ) of Nitrotherm uses 3 principles to separate the Nitrogen enriched flow from the compressed air: hollow fibers, the most advantageous geometrical form for membraneprocesses (large density of filtering surface, low energy consumption); selective permeation: each gas has a characteristic permeation rate thatis its ability to dissolve and diffuse through a membrane.

4 It is thereforepossible to separate gases such oxygen, helium, water vapor (permeated) from Nitrogen , argon (concentrated); tangent flow: avoids the accumulation of permeated molecules, themembrane is not subject to progressive contamination since the exhaustgases are eliminated at atmospheric Nitrotherm for coating? Nitrogen is anhydrous and without impurities (dust, oil, fumes, chemicalpollutants); Nitrogen is an inert and stable gas; the paint particles are faster = less working pressure: less overspray; increased transfer efficiency on the surface; better working environment conditions and less spra ybooth filtermaintenance. heated Nitrogen using Nitrotherm Tube: lower product viscosity; reduced use of solvents = no orange peel effect and no micro air bubbles; reduction of volatile organic components (VOC); improved application and transfer efficiency; improved coverage and less aggressive product Nitrogen dew pointWhy Nitrotherm for coating?

5 It is possible to charge the enriched flow of Nitrogen with positive or negative ions and regulate the polarity of the cone charge quantity (up to 15 kV). Notice: NITROTHERM does not replace electrostatic applications nor does it permanently solve problems caused by static charges. The DESTATIC version (which includes an ionizer) makes the work easier either during application (metallic products) or at the end of the process (drastic reduction of impurities on the target).Electrostatic chargeDroplets velocity comparisonDroplets diameter comparisonHeated Polarized Nitrogen Greater transfer efficiency (fewer coats for the same dry mils) Reduction of process time with wet on wet applications (fewer trips around the object). Less solvents (reduced flash time, possible shorter Bake Cycles) Paint is better distended on the target, resulting in better Distinction Of Image (DOI) and Higher Quality.

6 Less Contamination = Less Sanding and Buffing. Less material usage with better coverage. Less Filter Load. Reduced time in booth. Greater productivity. Less VOC Produced Typical installationNitrotherm expansion2003: The Nitrotherm units were designed and begun to be sold in Italy;2004: Significant expansion to the Woodworking Sector North East of Italy, and approach to the automotive aftermarket nationwide2005: With Autopromotec Bologna Eurosider started distributing the technology in Europe and North America2006 2009: New Sectors of activity were found: from Marine (boats, yachts) to Railway coaches manufacturing Industries to Spectacles manufacturers, to Aviation Industry and so on. Eurosider expands the activity in 2014: The Nitrotherm becomes a world wide technology thanks to a network of distributors that covers mostly of the world. In 2010 eventually an important breakthrough in the Automotive OEM Car manufacturing in North America that, event that starts a new era in the technology diffusion to the current from Compressed air to NitrogenThe Nitrotherm technology is not Plug & Play, meaning that by replacing the fluid carrier from compressed air to air enriched of Nitrogen some adaptations MUST be carried out.

7 The Nitrotherm does not conflict with any brand of equipment or paint used for coating by the end Pressures surely need to be reduced and most of the times also the nozzle sets need to be replaced to a lower tip diameterA new technique of spraying, more visual than auditive, is normally learned easily in a few hours of training (distance of the gun from the target, fan pattern, overlaps, speed of the hand of robotized strokes with the sprayguns/nozzlesPolarity of the Spray cone setting: +/ Evolution of the Nitrothermtechnology for Robotized and electrostatic coatingWe can announce that we have several new pieces of equipment and add on features to implement the Nitrotherm Technology and that are, all of them, under separate patented claims worldwide:Add on Features:a) Pulsair : a system for pulsating the ions of the Nitrogen enriched fluid carrier in the cone/plume to allow a better reach of the paint droplets in difficult parts of the targetb) Thermocoat : a system for keeping the temperature of the paint constant during the coating processc) NitroRobot : a whole system encompassing all the Eurosider patented technologies designed expressly for Electrostatic Coating (Rotary Bells)d) Polifluid : a system for powder coatingContacts and ReferencesEurosider Sas di Ottavio Milli & C.

8 Piazzale Tailandia, 658100 GROSSETO (GR) mail: +39 0564 425117 Oriano PetrucciSales AgentCell: +39 348 812 5359E mail.