7091 - Crane Composites

1 GLASBORD SMOOTH WALL PANEL. 7091. technical data CLASS C FIRE RATING PER ASTM E-84 REV. 11 | 06/18. PRODUCT CODE: PSIF. PRODUCT PURPOSE. Glasbord with Surfaseal is made of fiberglass reinforced Glasbord with Surfaseal smooth panels are designed for plastic. Glasbord is a durable, flexible building material interior wall finishes where a Class C, sanitary, easy-to- and will not mold, mildew, rot or corrode. It exhibits clean panel is desired. Smooth panels will withstand excellent resistance to mild chemicals and moisture. moderate abuse. For better abrasion resistance The panel has a Class C rating for flame spread and embossed panels are recommended. smoke development when tested per ASTM E-84. SURFASEAL FINISH. Surfaseal is a unique surface treatment that, when compared to ordinary FRP, exhibits up to ten times cleanability, six times the stain resistance and twice the abrasion resistance. DESIGN PROPERTIES. PRODUCT NOMINAL THICK- FINISH COLOR AVAILABLE SIZES.

2 CODE NESS. 4' x 8' | 4' x 9' | 4' x 10' | 4' x 12'. m x m | m x m |. White | 85 m x m | m x m PSIF " | mm Smooth Gray | 636. Ivory | 84 Panels for Ceilings " x " | " x ". m x m | m x m Additional lengths, widths and colors available by quotation. 12,000 sq. ft. per product, weight and colors required to manufacture. Orders from different customers may be batched to obtain manufacturing minimums, however lead time may be affected. TYPICAL PHYSICAL PROPERTIES. PROPERTY PSIF TEST METHOD. FLEXURAL STRENGTH 14 x 103 psi | 97 MPa ASTM - D790. FLEXURAL MODULUS x 106 psi | 5171 MPa ASTM - D790. TENSILE STRENGTH 7 x 103 psi | 48 MPa ASTM - D638. TENSILE MODULUS x 106 psi | 4826 MPa ASTM - D638. BARCOL HARDNESS 45 ASTM - D2583. IZOD IMPACT ft-lb/in notched | J/mm ASTM - D256. COEFFICIENT OF LINEAR THERMAL EXPAN- x 10-5 in/in/ F | 36 m/m/ C ASTM - D696. SION. < @77 F |. WATER ABSORPTION ASTM - D570. < @25 C. SURFACE BURNING CHARACTERISTICS Class C ASTM - E84.

3 GLASBORD | PSIF. SPECIFICATIONS been tested to this requirement, see our test reports on Crane Composites , Inc. (CCI) panels are manufactured by a our website at continuous laminating process in lengths as required. html 3. FRP does not support mold or mildew (per ASTM D3273. COMPOSITION and ASTM D3274). Reinforcement: Random chopped fiberglass. 4. Meets minimum requirements of major model building Resin Mix: Polyester/styrene copolymer, inorganic fillers, and codes for Class A interior wall and ceiling finishes of pigments. flame spread 25, smoke developed 450 (per ASTM. E-84). FINISHED PANEL QUALITY FXE, FSFM, FX, STA/SSTA/LBALN/LNAM, FX/CGPF, 1. Panels shall have a wear side with a pebble-like IPSA/IPSC/IPCN, FRFRJ/FX, FSI. embossed finish (FXE, FX, PIF, FTSTF, CGI, PWI, PCI, 5. Meets minimum requirements of major model building FTSTF/FTSTJ, FX/CGPF, LPCE, FRFRJ/FX) OR codes for Class C interior wall and ceiling finishes of smooth finish (FSFM,FSI, PSIF, CNSI, IPSA/IPSC/IPCN, flame spread 200, smoke developed 450 (per ASTM.))

4 FSQF, FSI) OR E-84). matte embossed finish (RE/RE*, REI) OR PIF, FTSTF, PSIF, CGI, PWI, RE/RE*, REI, STC/SSTC/. consistent pattern (STA/SSTA/LBALN/LNAM, STC/ LBCLN/FTBB, SMXGJ/MXGCJ, FTSTF/FTSTJ, FSQF, SSTC/LBCLN/FTBB). FX/CGPF, LPCE, IPSA/IPSC/IPCN. 6. Meeting certification requirements for CAN/ULC-S102. Color shall be uniform throughout as specified. OR | FX, PCI, IPCN, CNSI. Panels shall have a wear side with a gelcoat finish. There 7. MEA Certified. MEA 16-85M. VOL. II. shall be a contrasting core color. | SMXGJ/MXGCJ | FX. 8. Fire-X Glasbord (FXE and FSFM) is the only fiberglass The backside shall be smooth. The backside surface reinforced interior wall and ceiling panel that is accepted may have some variations which do not affect functional under Factory Mutual Research approved FRP, Plastic properties and are not cause for rejection. Interior Finish Materials when installed in accordance 2. Physical properties shall be as set forth on Page 1.

5 With Factory Mutual Research Approval Standard 4880. 3. Dimensions shall be as specified on purchase order, This information is available at subject to the following tolerances: and WIDTH: 1/8 ( mm) FXE, FSFM, LENGTH: 1/8 ( mm) up to 12 ( m) 9. Agriculture and Agri-Food Canada Certified SQUARENESS: 1/8 ( mm) in 48 ( m) of width | PCI, CNSI. 4. Product quality standards and tolerances for panel 10. This panel has earned GREENGUARD Indoor Air weight and thickness shall be as set forth in Crane Quality Certification Composites ' Quality Control Procedures/Standards (Certificate #16349-410, 16364-410, 16351-410). which are available on request. | Varietex Class A/C. 5. Panels shall be installed in accordance with (Certificate #16352-410) manufacturer's guidelines as set forth in the | Varietex Gelcoat Crane Composites Installation Guide (Form (Certificate #16350-410) #6876). | DESIGNS. (Certificate #15955-410) CERTIFICATIONS | Glasbord 1.

6 Meets USDA/FSIS requirements. (Certificate #15956-410) 2. Some products have been tested and meet the | Glasbord FM. requirements FMVSS 302. For a list products that have (Certificate #15957-410) | Sequentia FLAME SPREAD AND SMOKE DEVELOPMENT RATINGS. The numerical flame spread and smoke development ratings are not intended to reflect alleged hazards presented by Crane Composites products under actual fire conditions and this product has not been tested by Crane Composites except as set forth below. These ratings are determined by small-scale tests conducted by Underwriters Laboratories and other independent testing facilities using the American Society for Testing and Materials E-84 test standard (commonly referred to as the 'Tunnel Test '). Crane Composites PROVIDES THESE RATINGS FOR MATERIAL COMPARISON PURPOSES ONLY. Like other organic building materials ( wood), panels made of fiberglass reinforced plastic resins will burn.

7 When ignited, FRP may produce dense smoke very rapidly. All smoke is toxic. Fire safety requires proper design of facilities and fire suppression systems, as well as precautions during construction and occupancy. Local codes, insurance requirements and any special needs of the product user will determine the correct fire-rated interior finish and fire suppression system necessary for a specific installation. We believe all information given is accurate, without guarantee. Since conditions of use are beyond our control, all risks are assumed by the user. Nothing herein shall be construed as a recommendation for uses which infringe on valid patents or as extending a license under valid patents. | | [fax] | A global leading provider of resilient wall and ceiling coverings. Kemlite was established in 1954 and the company changed names to Crane Composites in 2007. Crane Composites is headquartered in Channahon, IL and all our products are manufactured in the United States.

8 We work with hundreds of distributors, ensuring our products are easily accessible and readily available to our customers. The following are trademarks of Crane Composites , Inc. or a related company: Glasbord, Kemlite, Kemply, Surfaseal, Sanigrid, Silhouette Trims and Varietex 7091 | REV. 11 | (8369).