Example: barber

Acquired Tactical Illuminator Laser Aimer - Nivisys

Nivisys , LLC 400 S. Clark DriveSuite 105 Tempe, AZ 85281 USA480-970-3222 (tel)480-970-3555 of the commodities described herein is strictly prohibited without a valid export license issued by the Department of State Office of Defense Trade Controls prescribed in the International Traffic in Arms Regulations (ITAR) Title 22, Code of Federal Regulation, Parts 120-130 OPERATOR MANUALATILLA-200 TMAcquired Tactical IlluminatorLaser AimerP/N 830-0061-0 OSR 11-S-2492 Inside cover intentionally left , LLC. Rev. 16 July 2012 iOPERATORMANUAL forATILLA-200 TMAcquired Tactical IlluminatorLaser AimerATILLA-200 ALL RIGHTS RESERVEDThis document contains information developed by Nivisys , LLC. It has been prepared to instruct Nivisys customers in the proper care and operation of the equipment respective to this document.

Nivisys, LLC. Rev. 16 July 2012 i OPERATOR MANUAL for ATILLA-200TM Acquired Tactical Illuminator Laser Aimer ATILLA-200 ALL RIGHTS RESERVED This document contains information developed by Nivisys, LLC.

Tags:

  Tactical, Laser, Acquired, Mirae, Illuminator, Acquired tactical illuminator laser aimer

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Acquired Tactical Illuminator Laser Aimer - Nivisys

1 Nivisys , LLC 400 S. Clark DriveSuite 105 Tempe, AZ 85281 USA480-970-3222 (tel)480-970-3555 of the commodities described herein is strictly prohibited without a valid export license issued by the Department of State Office of Defense Trade Controls prescribed in the International Traffic in Arms Regulations (ITAR) Title 22, Code of Federal Regulation, Parts 120-130 OPERATOR MANUALATILLA-200 TMAcquired Tactical IlluminatorLaser AimerP/N 830-0061-0 OSR 11-S-2492 Inside cover intentionally left , LLC. Rev. 16 July 2012 iOPERATORMANUAL forATILLA-200 TMAcquired Tactical IlluminatorLaser AimerATILLA-200 ALL RIGHTS RESERVEDThis document contains information developed by Nivisys , LLC. It has been prepared to instruct Nivisys customers in the proper care and operation of the equipment respective to this document.

2 Neither receipt nor possession thereof confers any right to reproduce or use, or disclose, in whole or in part, any such information without written authorization from Nivisys , LLC. 2011 , LLC. Rev. 16 July 2012 iiThis page intentionally left , LLC. Rev. 16 July 2012 iiiADVISORY OVERVIEWThe following description categorizes the level of risk associated with each cautionary statement displayed throughout the AN OPERATION OR PROcEDURE WHIcH, If NOT STRIcTLY ObSERVED, cOULD RESULT IN INjURY TO OR DEATH Of AN OPERATION OR PROcEDURE WHIcH, If NOT STRIcTLY ObSERVED, cOULD RESULT IN DAMAGE TO OR DESTRUcTION Of EqUIPMENT OR LOSS Of MISSION AN ESSENTIAL OPERATION, PROcEDURE, cONDITION OR , LLC.

3 Rev. 16 July 2012 ivThis page intentionally left , LLC. Rev. 16 July 2012 vLASER SAfETY DATAThis electronic product has been exempted from FDA radiation safety performance standards prescribed in the Code of Federal Regulations, Title 21, Chapter I, Subchapter J, pursuant to Exemption No. 76EL-01 DOD issued on July 26, 1976. Laser Safety Data*DescriptionAIMERL aser Power Output50mW maxLaser Beam maxLaser Safety ClassClass 3 BNominal Ocular Hazard Distance(NOHD) for the unaided eye309yds(283m) Laser Wavelength830 nm 20 nmDescription ILLUMINATORCQB LED Output Power150 mW 5 mW Beam -240mR (13 ) Laser Safety ClassClass 3 BNominal Ocular Hazard Distance (NOHD) for the unaided eye147yds(160m)LED Wavelength830 nm 20 nm*The above data is based on Laser Hazard Safety Analysis, Air Force Research Lab Human Effectiveness Directorate Optical Software.

4 Data is based on a <10 second exposure for IR wavelength. All output power readings are maximum values at 73 F (23 C). Nivisys , LLC. Rev. 16 July 2012 viThis page intentionally left , LLC. Rev. 16 July 2012 viiSAfETY INfORMATIONThe following section outlines general risks, safety precautions and warnings associated with the safe use of a Laser . Read the following before any operation of the ARE EYE AND OTHER HAzARDS ASSOcIATED WITH THE USE Of THE ATILLA SERIES. SAfE OPERATION Of THIS PRODUcT REqUIRES fOLLOWING WARNINGS, cAUTIONS AND NOTES cONTAINED IN THIS OPERATOR Laser SAfETY OffIcER (LSO) SHOULD bE ASSIGNED TO SUPPORT OPERATIONAL AND TRAINING AcTIVITIES USING THE ATILLA. THE LSO SHOULD bE ADEqUATELY TRAINED AND PROVIDE TRAINING IAW ANSI (OR LATEST VERSION).

5 WARNINGALL PERSONNEL PARTIcIPATING IN TRAINING OR OPERATIONS THAT INVOLVE THE USE Of LASERS SHOULD cOMPLY WITH cOMMAND / ORGANIzATIONAL UNIT AND LSO , LLC. Rev. 16 July 2012 viiiWARNINGIT IS NEcESSARY AND INTENDED THAT Laser EYE PROTEcTION OR NIGHT VISION DEVIcES bE WORN bY THE OPERATOR WHEN OPERATING, MAINTAINING, SERVIcING, OR TESTING THE IN HOSTILE TERRITORY, OPERATE THE ATILLA WITH cAUTION. ANY PERSON USING NIGHT VISION DEVIcES cAN DETEcT THE IR SOURcE USED IN THE VIEW THE bEAM DIREcTLY ON AxIS THROUGH MAGNIfYING OPTIcS SUcH AS bINOcULARS OR TELEScOPES WITHOUT APPROPRIATE SAfETY fILTERS AS MAGNIfYING OPTIcS HAVE THE AbILITY TO REfOcUS Laser LIGHT AND TO INcREASE THE NOMINAL OcULAR HAzARD DISTANcE (NOHD).

6 WARNINGUSE Of cONTROLS OR ADjUSTMENTS OR PERfORMANcE Of PROcEDURES OTHER THAN THOSE SPEcIfIc HEREIN MAY RESULT IN HAzARDOUS RADIATION , LLC. Rev. 16 July 2012 ixTAbLE Of cONTENTSA dvisory Overview iiiLaser Safety Data vSafety Information viiTable of Contents ixList of Figures

7 XiList of Tables xiiicHAPTER 1: GENERAL INfORMATION Introduction Equipment Description Standard Kit Parts List Standard Kit Parts Illustration System Performance and Data Nominal Ocular Hazard Distance (NOHD) 1-6 cHAPTER 2: PREPARATION fOR USE Introduction Battery Precautions Battery Installation NVEC #16 Installation on an M16 Attaching to a MIL-STD-1913 Remote or Paddle Switch Installation 2-6cHAPTER 3.

8 OPERATING INSTRUcTIONS 3-1 Introduction Operating Precautions Controls and Indicators Safe Operation Powering ON the ATILLA-200 Beam Modes 3-6 Nivisys , LLC. Rev. 16 July 2012 xTAbLE Of cONTENTS (CONT.) Firing the Laser Using the Continuous Fire Button Firing the Laser Using the Remote or Paddle Switch Continuous Fire Indicator Low Battery Indicator Power Adjuster Buttons Illumination Laser Focus Knob Elevation and Azimuth Adjusters Preparing the ATILLA-200 for Zeroing Zeroing the ATILLA-200 to a M16/M4 using the NVEC#16 Zeroing the ATILLA-200 to Any Weapon Preparation for Storage 3-20 cHAPTER 4.

9 MAINTENANcE INSTRUcTIONS Introduction Preparing for Maintenance Cleaning the ATILLA-200 Cleaning the Optical Surfaces Checking for Damage and Corrosion Preventive Maintenance Checks and Services (PMCS) 4-2cHAPTER 5: TROUbLESHOOTING Troubleshooting Procedures 5-1 APPENDIx A: SPARE AND REPAIR PARTS LIST Introduction Contact Information Spare Parts List A-1 APPENDIx b: WARRANTY INfORMATION b-1 Nivisys , LLC.

10 Rev. 16 July 2012 xiLIST Of fIGURESfIGURE DEScRIPTION PAGE1-1 Standard Kit Parts Illustration 1-32-1 Battery Installation 2-22-2 NVEC#16 Installation, Steps 1-6 Exploded 2-32-3 NVEC#16 Installation, Steps 1-6 Completed 2-42-4 NVEC#16 Installation, Steps 7-8 Exploded 2-42-5 NVEC#16 Installation, Step 9 2-52-6 NVEC#16 Installation, Step 10 2-52-7 Weapon Mount Installation 2-62-8 Remote/Paddle Switch Installation 2-72-9 Paddle and Remote Switches 2-83-1 Controls and Indicators 3-33-2 OFF/MODE Switch Knob 3-63-3 Continuous Fire Button 3-73-4 Momentary Fire Button 3-93-5 Continuous Fire Indicator 3-93-6 Low Battery Indicator 3-103-7 Power Adjustment Buttons 3-113-8 Illuminator Laser Focus Knob 3-123-9 Elevation and Azimuth Adjusters 3-133-10 Neutral Adjustment Setting 3-143-11 Example Target for Zeroing Using the NVEC#16 3-153-12 Example Target for Zeroing Any Weapon 3-19 Nivisys .


Related search queries