ACSR ALUMINUM CONDUCTOR STEEL REINFORCED

1 APPLICATION:Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable STEEL core stranding enables desired strength to be achieved without sacrificing ampacity. ACSR ALUMINUM CONDUCTOR STEELREINFORCEDPRODUCTFEATURES: ALUMINUM alloy 1350-H-19 wires, concentrically stranded about one STEEL core. Core wire for ACSR is available with class A, B, or C galvanizing; aluminized ALUMINUM coated (AZ); or ALUMINUM -clad (AW). Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with :ACSR bare CONDUCTOR meets or exceeds the following ASTM specifications: B-230 ALUMINUM Wire, 1350-H19 for Electrical Purposes B-231 ALUMINUM Conductors, Concentric-Lay-Stranded B-232 ALUMINUM Conductors, Concentric-Lay-Stranded, Coated STEEL REINFORCED B-341 ALUMINUM -Coated STEEL Core Wire for ALUMINUM Conductors, STEEL REINFORCED (ACSR/AZ) B-498 Zinc-Coated STEEL Core Wire for ALUMINUM Conductors, STEEL REINFORCED (ACSR/AZ) B-500 Zinc-Coated and ALUMINUM -Coated Stranded STEEL Core for ALUMINUM Conductors, STEEL REINFORCED (ACSR)800-453-5464 Al/1 St18 Al/1 St36 Al/1 St12 Al/7 St26 Al/7 St45 Al/7 St54 Al/7 St54 Al/19 St84 Al/19 StKINGWIRE ACSR - ALUMINUM CONDUCTOR STEEL ReinforcedCode WordSize (AWG or KCM)Stranding(AL/STL)DiameterWeight per 1000 ft(Lbs)Content %RatedBreakingStrength(Lbs)ResistanceOHM S/1000 ftRating (AMPS)Indiv.

2 Wire ALIndiv. WireSTLS teel CoreCompleteCable ODDC @ 20 CAC @ 75 CALSTLT otalALSTLT urkey66 , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , + CONDUCTOR temperature of 75 C, ambient temperature 25 C, emissivity , wind ACSR - ALUMINUM CONDUCTOR STEEL ReinforcedCode WordSize (AWG or KCM)Stranding(AL/STL)DiameterWeight per 1000 ft(Lbs)Content %RatedBreakingStrength(Lbs)ResistanceOHM S/1000 ftRating (AMPS)Indiv. WireAIIndiv. WireSTLS teel CoreCompleteCable ODDC @ 20 CAC @ 75 , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Resistance is calculated using ASTM standard increments of stranding, and metal conductivies of IACS for EC (1350), and 8% IACS for STEEL . AC (60 Hz) resistance includes current dependent hysteresis loss factor for 1 and 3 Current ratings are based on 75 C CONDUCTOR temperature, 25 C ambient, 2ft/sec wind, 96/watts/sq.

3 Foot sun, coefficients of emissivity and absorption.