ADA-compliant undersink protection Submittal Sheet

1 Model #99 E-ZOne angle valve and supply cover_____ Model #100 E-ZOne P-trap cover_____ Model #400W*One P-trap cover_____ Model #101 E-ZOne P-trap cover, one anglevalve cover_____ Model #401W*One P-trap cover, one anglevalve coverGeneral Description:LAVGUARD 2 E-Z Series waste and supply piping covers satisfy ADA compliance requirements. Built-inE-Z Gripinternal fasteners and internal, E-Z Tear-To-Fittrimming feature allow for fast installation without #100 E-Zkits are designed to fit on all tubularand cast brass P-trap #400kitsare the original LAVGUARD design and fit schedule 40 ABS and PVC P-trap assemblies regardless of theirgeometry or rotational offset.

2 Valve cover completelyencloses angle valve and supply tube for both handledand keyed type water vinyl_____Nominal Wall1/8" constant_____Durometer70 - 80 - Shore A_____UV ProtectionWill not fade or discolor_____DurabilityVirtually indestructible_____Trimming (E-Z Series)Internal, E-Z Tear-To-Fittrim feature_____Fasteners (E-Z Series)Internal E-Z Grip fasteners (reusable)_____ColorChina white_____PaintabilityApply Latex paint_____Burning Characteristics Self extinguishedASTM D-6350 sec (ATB) 0 mm (AEB) _____Bacteria/Fungus ASTM G21 and G22/Resistance Result: 0 growth _____Maintenance Use common detergents_____Submittal SheetADA-compliant undersink protectionTRUEBRO reserves the right to make product and material changes at any time without / 07 IPS Corporation, 202 Industrial Park Lane, Collierville, TN 38017(901) 853-5001 (800) 340-5969 FAX: (901) 853-5008e-mail: Internet.

3 _____ Model #102 E-ZOne P-trap cover, two angle valvesand covers_____ Model #402W*One P-trap cover, two angle valvesand covers_____ Model #103 E-ZOne P-trap cover, two angle valvesand supply covers, one 5" offsettailpiece wheelchair strainer cover_____ Accessory #105 E-ZOne 5" offset tailpiece wheelchairstrainer assembly#100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies.#400W*Series(original design) for schedule 40 P-trap under one or more of the following or Canadian patents ,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,4125,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,08310" waste arm cover with internalE-Z Tear-To-Fit trim feature9" supply tube cover with internal E-Z Tear-To-Fit trim groovesJ-bend covers all tubular and cast brassconfigurationsInternal ribs add cushioning and thermal resistance10" tailpiece coverE-Z Tear-To-Fittrim groovesE-Z Grip internal fastenersVent hole keeps P-trap dryVent slots keepvalve dryInstall over pipes.

4 Press fingerrecesses to engageinternal remove covers,firmly pull seamapart using a strong on internal dimensioned tear lines. Accessory #105-KKohler 6" offset_____ Accessory #106 E-ZOne basket strainer cover and offsetwaste cover (adjustable to 18")_____ Accessory #107 E-ZTwo basket strainer covers and centeror end outlet waste cover (adjustable)_____ Accessory #Ex 99 E-ZOne 14" extension f_____or water supply Accessory #Ex100 E-ZOne 14" extension for drain waste arm or tailpieceCenter OutletAccessory 106 E-ZEnd OutletAccessory 107 E-Z(Configuration Options Shown)Accessory 105 E-ZShown withAccessory #105 E-Z (fits all standard 5" offsetwheelchair strainers).

5 Accessories105 E-Z,106 E-Z, and 107 E-Zcan be purchased :Accessory #105 E-Z is included in#103 E-Z *All #400W series items are the original LAVGUARD design may change without notice. Lav Guard2 Sbmttl 2-07 2/7/07 2:22 PM Page 1