Transcription of AERIAL STORES LIFT TRUCK - core-aerospace.com
1 HYDRAULICS INTERNATIONAL, Independence Avenue, Chatsworth, CA 91311, USATel: +1 (818) 718-2462 Fax: +1 (818) 718-2459 Website: STORES LIFT TRUCKMODEL MJ-1C P/N 8141050-60 NSN 1730-01-491-1557 HYDRAULICS INTERNATIONAL, Independence Ave., Chatsworth, CA 91311, USATel: +1 (818) 718-2462 Fax: +1 (818) 718-2459E-Mail: AERIAL STORES LIFT TRUCKP/N 8141050-60 NSN 1730-01-491-1557 APPLICATIONS tandard equipment for loading/unloading & transporting of AERIAL STORES including munitions, fuel tanks, pylons, special weapons, & SAR packs weighing up to 3,000 pounds onto/into tactical diameter of store* ..40 length of store* ..144 weight of store on load table ..3,000 distance from ground to bottom of store on table .. CHARACTERISTICSTARE ,860 CAPACITYOn table ..3,000 forks.
2 2,250 load table, load table, max..78 forks, normal position, min..1 forks, normal position, max.. CAPABILITIES OF TABLEL ateral (either side of center) .. 2 3/8 (either side of center) .. 2 3/8 in. Tilt (either side of horizontal) .. 5 MOBILITYS pecification ..MIL-M-8090 Max. Speed, loaded ..12 mphBraking distance, loaded ..15 distance, unloaded .. radius (total swing clear) ..10 width, rear wheels .. width, front wheels ..28 Grade, loaded ..10%Max. Grade, unloaded ..20%Power steering on rear with hydrostatic and rear wheels equipped with , 8 ply type, tires, tubes and caliper type disc brakes on front wheels and rear drive ENGINE SPECIFICATIONSM odel F2L1011 FRated output ..27 HP @ 2,800 rpmOperating cycle ..4 strokeCooling system ..Forced air over.
3 Cu. no. 1, 2, JP4, JP8 HYDRAULIC Arms system operating pressure ..1,800 psiManipulator head motion system operating ,800 psiPower steering system operating pressure ..850 psiPower brake system operating pressure ..450 psiMotor drive operating pressure ..3,000 5,000 psiHYDRAULICALLY OPERATED ITEMSH ydrostatic drive systemManipulator headLift armsPower steeringBrakesCOMPONENTSSix gallon capacity hydraulic fluid type pump for steering system delivers gpm @ 700 psi Pressure compensated piston type pump for manipulator head, brake and lift armsystems delivers up to 10 gpm @ 1,800 hand pump delivers 2 cu. in. per cycle at 1,500 CHARACTERISTICS12 Volt SystemElectrical StarterAlternatorEquipped with floodlight and backup lightOPERATIONAL STATUSE nvironmental tested per MIL-E-4970 (-65oF to 160oF).
4 Qualification tested to insure compliance with the MJ-1A test for handling nuclear weapons in accordance with requirements ofUSAF Weapons Laboratory, Kirtland AFB, tested and qualified for Radiated Emissions (RE102), and Radiated Susceptibility (RS103) per MIL-STD-461D and certified per European Machinery Directives and Standards of EN60204-1 exhaust emission is certified to TIER 2 of European Emission emission is limited to less than 80dBA at one meter distance of the unit or operator station per latest issue of ISO 3744.* For applications which exceed these limitations, consult Engineering Dept.
