Transcription of AEROGREASE 6 - Login
1 AEROGREASE 6. Aviation Grease composed of a lithium soap in a mineral oil (5 mm /s at 100 C), with graphite and synthetic oil in addition. APPLICATIONS. AEROGREASE 6 is especially recommended when: z the surfaces to be lubricated are subject to relatively slow sliding movements, with high loads. z Temperatures are below -20 C with very heavy loads which prevent the use of AEROGREASE 5 or any G-359 grease. z AEROGREASE 6 is not recommended for the lubrication of bearings working at high speeds, nor ball bearings, electromotors.
2 SPECIFICATIONS. z AEROGREASE 6 meets the following specifications. - MIL-G-7187 (obsolete). - UK: DEF STAN 91-54. - FRANCE: DCSEA 355/A. - Joint Service Designation XG-285. z NATO Code: G-355. ADVANTAGES. z Resistance to oxidation and corrosion. z Very good water resistance. z Contains solid lubricants which enhance resistance under heavy loads. TYPICAL CHARACTERISTICS METHODS UNITS AEROGREASE 6. Appearance homogeneous Colour black Odour Not unpleasant Drop point NF T 60-102B C > 170. Penetration at 25 C (grease worked 60 cycles) NF T 60-132 1/10 mm 265-340.
3 Graphite % Oil blead 30 hours at 100 C, FTM 791-321 % <5. Utilisation limits C - 40 / +121. Above characteristics are mean values given as an information. TOTAL LUBRIFIANTS. Industrie & Sp cialit s 20-04-2007 (supersedes 08-02-2007). AEROGREASE 6. 1/1. This lubricant used as recommended and for the application for which it has been designed does not present any particular risk. A material safety data sheet conforming to the regulations in use in the is obtainable via your commercial adviser
