Agreement - UNECE

1 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions* (Revision 2, including the amendments which entered into force on 16 October 1995) _____ Addendum: 128: Regulation: 129 Date of entry into force as an annex to the 1958 Agreement : 9 July 2013 Uniform provisions concerning the approval of enhanced Child Restraint Systems used on board of motor vehicles (ECRS) _____ UNITED NATIONS * Former title of the Agreement : Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor vehicle Equipment and Parts, done at Geneva on 20 March 1958.

2 E/ECE/324 E/ECE/TRANS/505 7 August 2013 E/ECE/324 E/ECE/TRANS/505 3 Regulation No. 129 Uniform provisions concerning the approval of enhanced Child Restraint Systems used on board of motor vehicles (ECRS) Contents Page Regulation 1. Scope .. 5 2. Definitions .. 5 3. Application for approval .. 11 4. Markings .. 12 5. Approval .. 16 6. General specifications .. 17 7. Tests .. 36 8. Test reports of type approval and of production qualification .. 50 9. Production qualification .. 51 10. Conformity of production and routine tests.

3 52 11. Modification and extension of approval of a Child Restraint System .. 53 12. Penalties for non-conformity of production .. 53 13. Production definitively discontinued .. 53 14. Information for users .. 53 15. Names and addresses of Technical Services responsible for conducting approval tests and of Type Approval Authorities .. 55 Annexes 1 Communication .. 56 2 Arrangements of the approval mark .. 58 3 Arrangement of apparatus for dust resistance test .. 59 4 Corrosion test .. 60 5 Abrasion and microslip test.

4 62 6 Description of trolley .. 65 Appendix 1 .. 71 Appendix 2 - Arrangement and use of anchorages on the test trolley .. 74 Appendix 3 - Definition of side impact door .. 76 E/ECE/324 E/ECE/TRANS/505 4 7 Curve of trolley's deceleration or acceleration, as function of time .. 79 Appendix 1 - Frontal impact .. 80 Appendix 2 - Rear impact .. 81 Appendix 3 - Lateral impact .. 82 Appendix 4 .. 83 8 Description of dummies .. 85 9 Frontal impact test against a barrier .. 89 10 Rear impact test procedure .. 91 11 Type approval scheme (Flow chart ISO 9002:2000).

5 93 12 Control of conformity of production .. 95 13 Test of energy absorbing material .. 99 14 Method of defining head impact area of devices with backrests and for rearward-facing devices defining the minimum size of side wings .. 101 15 Description of conditioning of adjusters mounted directly on Child Restraint Systems .. 102 16 Typical buckle strength test device .. 103 17 Determination of performance criteria .. 104 18 Geometrical dimensions of i-Size Child Restraint Systems .. 105 19 Assessment volumes for i-size support-legs and support-leg feet.

6 109 20 Minimum list of documents required for approval .. 113 E/ECE/324 E/ECE/TRANS/505 5 1. Scope This Regulation applies (in its Phase 1) to Integral Universal ISOFIX Child Restraint Systems (i-Size) and Integral "Specific vehicle ISOFIX" Child Restraint Systems for child occupants of power driven vehicles. 2. Definitions For the purposes of this Regulation, "Child Restraint System" (CRS) means a device capable of accommodating a child occupant in a sitting or supine position. It is so designed as to diminish the risk of injury to the wearer, in the event of a collision or of abrupt deceleration of the vehicle , by limiting the mobility of the child s body.

7 "Child restraint type" means a Child Restraint System which does not differ in such essential respects as: The category in which the restraint is type approved; The design, material and construction of the Child Restraint System. Convertible or modular Child Restraint Systems shall be considered to not differ in their design, material and construction. "i-Size" (Integral Universal ISOFIX Child Restraint Systems) is a category of Child Restraint System for use in all i-Size seating position of a vehicle , as defined and approved according to Regulation Nos.

8 14 and 16. "Integral" is a class of Child Restraint System, meaning that the child is restrained only by components which comprise the Child Restraint System ( strap harness, shield, etc.), and not by means connected directly to the vehicle ( ; seat belt). "ISOFIX" is a system that provides a method of connecting a Child Restraint System to a vehicle . It is based on two vehicle anchorages and two corresponding attachments on the Child Restraint System in conjunction with a means to limit the pitch rotation of the Child Restraint System.

9 All three vehicle anchorages are to be approved according to Regulation No. 14. "ISOFIX Universal" is an ISOFIX comprising either a top-tether or a support-leg, to limit the pitch rotation of the Child Restraint System, attached to, or supported by, the corresponding vehicle . "Specific vehicle ISOFIX" is a category of Child Restraint System connecting to specific vehicle types. All vehicle anchorages are to be approved according to Regulation No. 14. It is also an indication for Child Restraint Systems including dashboard as a vehicle contact zone.

10 "Size" indicates the stature of the Child for whom the Child Restraint System has been designed and approved. Child restraint systems may cover any size range provided that all requirements are fulfilled. E/ECE/324 E/ECE/TRANS/505 6 "Orientation" indicates a direction in which a Child Restraint System has been approved for use. The following distinctions are made: (a) Forward-facing means facing in the normal direction of travel of the vehicle ; (b) Rearward-facing means facing in the direction opposite to the normal direction of travel of the vehicle ; (c) Lateral-facing means facing perpendicular to the normal direction of travel of the vehicle .