Also compatible with Jeep Gladiator JT User’s Guide

1 1. Also compatible with jeep Gladiator JT. User's Guide For Firmware - 010522. The Tazer JL Mini is an electronic plug- in device for the following veWhicles: Contents CLICK to jump to section or 2018-2021 jeep Wrangler JL Use CTRL + F (Windows) or + F. (MacOS) to search the document 2020-2021 jeep Gladiator JT Feature List 2. Vehicle Settings 2. Firmware Updates Live Functions 3. New firmware is available periodically, Non- Menu Live Functions 4. Installation 5. always free and posted to the Z Menu Navigation 5. Automotive website. The Tazer may not CRITICAL INFORMATION 6. ship with the latest firmware, so use ZPU Returning to Stock (Unmarry) 6. Vehicle Settings 7. (Z Automotive Programming Utility), also Submenu Performance 7. on the website, to install the firmware Submenu Tire 8. over USB. Submenu Radio 8. Submenu Lighting 8. Submenu Off-Road 9. Submenu Other 10. Live Menu 11. Live Settings 11. Non-Menu Live Functions 12. Updating & Light Show Config 15. Unmarrying Your Tazer 15.

2 The Unmarry Key 16. Troubleshooting 16. 2. Feature List Tazer JL Mini features can be broken into three categories: Vehicle Settings are accessed with the engine OFF and the ignition in the RUN. RUN position. These are changes made to the jeep such as tire size, gear ratios or settings which accomodate other upgrades. These changes will continue to operate after the Tazer JL Mini is unplugged. Live Functions are accessed with the engine ON. ON. These are operations the Tazer JL Mini performs live, only while it is physically connected. Non-Menu Live Functions are not located in a menu. They are activated automatically or with a steering wheel button combination with the engine ON. ON. These are operations the Tazer JL. Mini performs live, only while it is physically connected. List of Vehicle Settings (ENGINE OFF, IGNITION IN RUN ). Light Show 6 preset and 3 make-your-own enable/disable CD (wired audio) input*. light shows that flash all the exterior lights enable/disable TravelLink/XM traffic and perfect for car shows/first responders/ weather off-road visibility controlled from key fob activate Offroad Pages after upgrading to or steering wheel buttons can be enabled radio in-motion for use in parades, off-road and change daytime running lights (DRL) region for legal police/EMS applications (contact (CA/USA).)

3 Support for more info) change DRL location read and clear DTCs system-wide or in enable/disable DRL Dropout function specific modules enable/disable factory fog lights change tire size enable/disable Fog Light Dropout (when change gear ratio (max on 4XE) fogs shut off while high beams are on). change Transfer Case LOW ratio enable/disable one-touch lane change enable/disable TPMS system enable/disable factory halo lights (including set TPMS pressure warning limit, front and BCM output for adding halos). rear, between 25psi and 85psi change headlight type (Std/LED). enable/disable backup camera change fog light type (Std/LED). enable/disable Cargo Camera input ( change taillight type (Std/LED)/delete UConnect only) sensor circuit for running aftermarket lights 3. change front turn signal type (std/LED)/ change cluster splash screen JL: delete sensor circuit for aftermarket lights Wrangler/Sahara/Rubicon JT: Sport/SportX/. enable/disable factory auto hi-beam Rubicon enable/disable Trailer Tow setting enable HVAC dual-zone switch assembly disable electronic sway bar (if removed from when upgrading from 5 radio the vehicle) enable HomeLink if HomeLink visor and disable electronic steering pump for harness are installed hydraulic steering conversions enable/disable auto dimming mirror after enable the trailer brake controller (primarily installation Gladiator ) enable Proximity Entry if handles and disable front and rear lockers for axle swaps harnesses are installed disable front axle disconnect module for axle enable pickup bed outlet ( Gladiator ).

4 Swaps enable/disable auto headlights after declare the presence of a Drive Train Control sensors are installed Module (Rubicon Transfer Case) enable/disable PANIC button on remote enable/disable Aux Buttons display Tazer JL Mini firmware version enable/disable Blind Spot Detection (if the display Tazer JL Mini serial number hardware is added or removed) display current Unmarry Number (see page delete the seat belt reminder chime 16). enable/disable/change ParkSense (one-touch return-to-stock quick Unmarry . configuration function returns to stock. List of Live Functions (ENGINE ON). activate Light Show flash lights to indicate tire pressure while hold brakes at a red light (excl. 4XE) filling use garage door opener after shutdown Dark Mode turn off all exterior lighting and enable navigation entry in-motion dash/radio/shifter lights while parked with the TurnCAM activate backup camera when turn engine running signals are used (5 , 7 and UConnect) activate and cycle through camera inputs toggle hood alarm display Vacuum/Boost Gauge enable passenger side heat on remote start activate 0-30 timer flash third brake light when braking activate 0-60 timer customize third brake light flash pattern Force RWD (392 only).)

5 Define Winch Mode RPM (excl. 4XE) display firmware version 4. List of Non-Menu Live Functions (NOT IN A MENU AUTOMATIC OR ACTIVATED WITH BUTTON INPUTS ONLY). AutoStopStart Disable Tazer JL Mini will burnout automatically remember the last state of Rock Crawl lock all four brakes with a the auto stop/start system and set it for you steering wheel button combo to hold the the next time you start the vehicle vehicle still, especially helpful when off-road AutoTracKill Tazer JL Mini will (excl. 4XE). automatically remember the last state of lock all four brakes in park to anchor jeep the traction control system and set it for you (shortcut) (excl. 4XE). the next time you start the vehicle TC Kill turn off traction control, stability disconnect sway bar in 2WD up to 30mph or control and ABS (excl. 4XE). at any speed if mapped to a button show backup camera (shortcut). License Plate Blanking ( Gladiator ) Tazer Turn Assist - lock the inside back tire for JL Mini will automatically turn off license sharper turns (button remap function only).

6 Plate light when in reverse or using (excl. 4XE). TurnCam to reduce glare remap cruise +/-/RES buttons to: activate bed lights/reverse lights from Any of the 8 light shows keyfob ( Gladiator ) Backup camera Axle Locker Control (Rubicon) engage TC Kill (excl. 4XE). lockers in 2WD and 4Hi on demand. Line Lock (excl. 4XE). Cooldown Mode turn on engine fans on- Rock Crawl (excl. 4XE). demand Turn Assist (excl. 4XE). Winch Mode raise idle RPM to user- Winch Mode (excl. 4XE). selected value between 1250 and Cooldown 2000 (excl. 4XE) Front/Rear/Front+Rear Lockers Hood Alarm monitors hood activity when SwayKill the vehicle theft alarm is armed and will Dark Mode sound the alarm and flash a light show if Force RWD. opened Partial Reboot Line Lock lock the front brakes for an easy 5. Installation Unplug the two SGW Functions) only work connectors circled in when plugged in. green by pressing the An optional SGW. tab with your index finger Extension Cable is and gently pulling straight available from our website down on the wires.

7 For easier removal. Plug those two connectors The Tazer JL Mini will go into the Tazer JL Mini. to sleep 30 seconds after The driver knee panel the jeep shuts down. may be removed for The Tazer JL Mini fits easier access to see the ALL jeep JLs and JTs. If connectors it looks like one of the The Tazer JL Mini can plugs is too big, you're be left plugged in, as looking at the incorrect many of its features (Live plugs (circled in red). Menu Navigation For all functions involving the dash (EVIC) Once the display is in this state, use the display, the EVIC screen first needs to be button commands below to operate your in a state where it's showing the AUDIO Tazer JL Mini. screen. Navigate to this screen using the steering wheel arrow buttons. Function Button Input OPEN MENU/SCROLL MENU (HOLD) + CRUISE CANC. SELECT/CHANGE OPTION. or (HOLD) + CRUISE ON/OFF. SAVE VALUE (TIRE SIZE, TPMS THRESHOLD, ETC.). ADJUST VALUE (TIRE SIZE, TPMS THRESHOLD, ETC.) (HOLD) + CRUISE +/- 6. CRITICAL. IF YOU MAKE ANY CHANGES IN THE VEHICLE SETTINGS.)

8 (ENGINE OFF) MENU OR UNMARRY, YOU MUST PERFORM A. FULL REBOOT AND TWO SLEEP CYCLES. SEE BELOW. After making all of your changes, scroll to full reboot? and select it. After the countdown, perform two sleep cycles. The quickest way to do this is to turn the ignition off, close the driver's door and wait about 60 seconds AFTER the dash goes dark, turn the ignition on (but not the engine). Do this twice. This step is critical after changing settings or settings might not save or you may find that the dash doesn't shut down, which can result in a dead battery. FULL REBOOTS SHOULD BE PERFORMED ON LEVEL. GROUND, WITH THE WHEELS STRAIGHT AND WITH YOUR. FOOT OFF THE BRAKES. Returning to Stock (Unmarry). SELECT UNMARRY FROM THE VEHICLE. SETTINGS MENU AND PERFORM THE. STEPS ABOVE TO RETURN YOUR VEHICLE. TO STOCK CONFIGURATION*. *Your Tazer stores the configuration present when it's Married. That will be what it returns to when you Unmarry, even if it wasn't stock. You should Unmarry and remove your Tazer before dealer service or if you wish to use your Tazer in another vehicle.

9 7. Vehicle Settings The Vehicle Settings menu is accessed with the ignition in Run (not ACC ) and the engine NOT running. The menu items are listed in the order in which they will display. Light Shows: Activate pre-programmed Clear DTCs: Clear any error codes in and custom light shows, even when those same systems the engine isn't running. Marry/Unmarry: To advance to any Read DTCs: View any error codes in of the vehicle settings, you will first the need to Marry the Tazer JL Mini Powertrain Control Module (PCM) to the vehicle. When you select this Body Control Module (BCM) option, the Tazer JL Mini will download Transmission Control Module your car's current (presumably stock). (TCM) settings. This should take around 15. Anti-lock Brake System (ABS) seconds. Do not disturb this process. Drivetrain Control Module (DTCM) Once complete, you will be able to Radio Frequency Hub (RFH) advance to the Settings choices. Drive Assistance Module (DASM) Submenus: Once married, you can Occupant Restraint Controller advance though several sub-menus.

10 (ORC) Select a submenu using the method ParkTronic System (PTS) described above. Submenu Perf: performance-based options Set Tire Size: Use this setting to to raise or lower the value, then select it change the calibration for tire size. Use (left arrow and cruise on/off) to save the the left arrow and cruise +/- buttons to new setting. (max on 4XE). raise or lower the value, then select it Set Transfer Case LOW ratio: Use this (left arrow and cruise on/off) to save setting to change the calibration for the new setting. 4 LOW gear ratio. Use the left arrow Set Gear Ratio: Use this setting to and cruise +/- buttons to raise or lower change the calibration for axle gear ratio. the value, then select it (left arrow and Use the left arrow and cruise +/- buttons cruise on/off) to save the new setting. 8. Submenu Tire: TPMS and tire size options Set TPMS: Turn the tire pressure buttons to raise or lower the pressure, monitoring system on or off. then select it to save the new setting. Set Tire Pressures Front/Rear: (The jeep 's computer will only Change the TPMS warning pressures recognize a minimum of 25psi.)