ALUMINIUM VENITIAN BLINDS - alfi.hunterdouglas.com.au

1 ALUMINIUM VENITIAN BLINDSPRODUCT INFORMATION MANUALSECTION: 1A ALUMINIUM VENETIAN BLINDSISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: PAGE 2 OF 15 PRODUCT INFORMATION MANUALSECTION: 1A ALUMINIUM VENETIAN BLINDSPRODUCT INFORMATION MANUALSECTION: 1 ALUMINIUM VENETIAN BLINDSISSUE DATE: APRIL 2015 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JANUARY 2013 APPROVED BY: PAGE 1 OF 13 Options & LimitationsVenetians - Micro, Slimline & 50mm Classic16mm MICRO25mm SLIMLINE/MAGNAVIEW25mm TWI-NIGHTER50mm CLASSICMAXIMUM WIDTH3100mm3700mm3700mm4000mmMINIMUM WIDTH (See price book for operation details)110mm110mm110mm160mmMAXIMUM DROP3700mm3700mm3700mm3500mmMAXIMUM AREA7m 9m 9m 12m MAXIMUM TAPE SPACING400mm600mm600mm900mmMAXIMUM END ROUT DISTANCE114mm152mm152mm152mmTAPE PITCH12mm20mm18mm41mmSLAT OVERLAP4mm5mm50mm9mmMINIMUM RECESS DEPTH20mm20mm N/A20mm (must side fix or back fix)

2 FULLY RECESSED BOX MOUNT50mm50mmN/A90mmSHADE STACK x drop + x drop + x drop + x drop + 80mmNUMBER OF SLATS DROP - 45 12 DROP - 45 12 DROP - 45 18 DROP - 70 41 STANDARD WAND SIZES500mm / 750mm / 1000mm / 1500mm Cord Control500mm/750mm 1000mm/1500mmWorm & GearSLAT (unpainted) .215mm (coated).195mm (unpainted) .215mm (coated).175mm (unpainted).215mm (coated)HEAD CHANNEL25mm Wide 25mm High25mm Wide 25mm High25mm Wide 25mm High57mm Wide 51mm HighAvailable with the DUO-FLEX optionYesYesYesYesSLAT = High Tensile # 6011 ALUMINIUM = Thermosetting Polymer Coating over a Chromated Primer. Comforming to DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: PAGE 3 OF 15 PRODUCT INFORMATION MANUALSECTION: 1A ALUMINIUM VENETIAN BLINDSPRODUCT INFORMATION MANUALSECTION: 1 ALUMINIUM VENETIAN BLINDSISSUE DATE: APRIL 2015 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JANUARY 2013 APPROVED BY: PAGE 2 OF 13 ALUMINIUM Venetians Special Shapes16mm and 25mm SLAT ONLY.

3 NO SPECIAL SHAPES ONLY CUT OUTS AVAILABLE ON LIMITED EDITION OR 50mm Venetian : Cord control side must be on shortest side of blind, as indicated by an X . Unless otherwise indicated, BLINDS will tilt and raise. BLINDS will only raise as far as the shortest CIRCLESMALL CUT OUTSLOPING BOTTOMSLOPING HEADSLOPING HEAD & BOTTOMHALF SLOPING BOTTOM (Tilt Operation Only)AIR CONDITIONING CUT OUTCENTRE CUT OUT HEADRAIL CUT BACKTRIANGLESARCHHEADRAIL SHORTER THAN BOTTOM RAILA > 180mm (25mm slat)A > 150mm (16mm slat)A < 149mm (25mm slat)A < 114mm (16mm slat)A > 150mm (25mm slat)A > 115mm (16mm slat)A must be > 90mmTilt OnlyA < 180mm (25mm slat)A < 150mm (16mm slat)Blind Price (W x D) + Sloping surchargeBlind Price (W x D) + Sloping surchargeBlind Price (W x D) + Sloping surchargeBlind Price (W x D) + Sloping surchargeBlind Price (W x D)

4 + smallCut Out surchargeBlind Price (W x D) + air conditioning surchargeBlind Price (W x D) + air conditioning surchargeBlind Price (W x D) + smallCut Out surchargeXUp to 45 D W Up to 45 D W XUp to 45 Up to 45 D XUp to 45 W D XLimitationsHow to PriceShapeHow to PriceThe Following Shapes Are Not AvailableShapes are not available Cutouts ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: PAGE 4 OF 15 PRODUCT INFORMATION MANUALSECTION: 1A ALUMINIUM VENETIAN BLINDSPRODUCT INFORMATION MANUALSECTION: 1 ALUMINIUM VENETIAN BLINDSISSUE DATE: APRIL 2015 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JANUARY 2013 APPROVED BY: PAGE 3 OF 13 ALUMINIUM Venetian Blind MeasuringFor 25/25 Headbox using Spring Loaded Mounting Brackets & End PlugsISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: PAGE 5 OF 15 PRODUCT INFORMATION MANUALSECTION: 1A ALUMINIUM VENETIAN BLINDSPRODUCT INFORMATION MANUALSECTION: 1 ALUMINIUM VENETIAN BLINDSISSUE DATE: APRIL 2015 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JANUARY 2013 APPROVED BY.

5 PAGE 4 OF 13 ALUMINIUM Venetian Blind Measuring50mm Classic ALUMINIUM Venetians - Spring Loaded BracketsWIDTH -0 WIDTH -10 DROP-10 TOSILL-10 ARCH-10 TOFLOOR-10 WIDTH +5060mmWIDTH -10 DROP-10+120 WIDTH -10 WIDTH -5 WIDTH-60 WIDTH-65 FRONT EDGE +50ON FACEFRONT EDGE -10 FRONT EDGE -0 WIDTH -60ON FACEWIDTH -60 WIDTH -30 WIDTH -30 FRONT EDGE -5 FRONT EDGE -5 WIDTH -30 WIDTH -30 ARCHITRAVE & REVEALFACE & REVEALCORNERSBAYSISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: PAGE 6 OF 15 PRODUCT INFORMATION MANUALSECTION: 1A ALUMINIUM VENETIAN BLINDSALUMINIUM VENETIAN BLINDSINSTALLATION OPERATION AND CARE INSTRUCTIONSIMPORTANT: Please read these instructions all the way through before Venetian Blind ordered should include: Spring loaded mounting brackets (No.)

6 Depends on size) 2 hold-down brackets 2 screws for each bracket (20mm x 6# Panhead) 2 cord cleats and screwsMATERIAL AND TOOLSTOOLS REQUIRED Steel measuring tape Carpenter s level Power or battery drill and bits Flat blade and Phillips head screwdrivers Scissors16MM & 25MM ALUMINIUM VENETIANSMOUNTING THE BRACKETThe installation brackets may be Reveal (inside the window frame) or Face (outside the window frame) mounted. In all cases, level mounting is critical to the operation of the blind (use Carpenter s level).SPRING LOADED ISSUE DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: PAGE 7 OF 15 PRODUCT INFORMATION MANUALSECTION: 1A ALUMINIUM VENETIAN BLINDS TILT AND LIFT SAME END TILT AND LIFT OPPOSITE END 16mm 80mm from end of headrail 55mm from end of headrail 25mm to centre of bracket.

7 To centre of brackets should be spaced evenly and as close to tape drum supports as DRUM SUPPORTSMOUNTING BRACKETSTILTER & CORDLOCK80 MMREVEAL FIT (INSIDE MOUNT)Hold the Venetian inside window frame and mark position of brackets so as not to foul tape drums. Attach the brackets with screws provided, (1 per bracket for top fix), to the front of the reveal, ensuring the front edges are in line and level. This is the usual position, however you may want to fit them further back into the reveal. NOTE: May need to use washers or packing to ensure FIT (OUTSIDE MOUNT)Hold the Venetian on the face of the window and mark position of brackets, so as not to foul tape drums.

8 Attach the brackets with screws provided (2 per bracket for face fit) ensuring all brackets are in line and : Blind will close tighter if fitted level. If headbox bows poor closure will END BRACKET LOCATIONFACE FIXING ONTO CEMENT RENDERED WALLSDo not drill too close to edge as render may break away. Use suitable rawl plugs in conjunction with the screws TO CLEAR HANDLES ETCIf needing to pack out from window to clear handles, locks etc use a full width piece of timber as this is more stable than individual pieces and you are able to fix brackets to timber in any DATE: JUNE 2018 ORIGINATOR: SKILTEC REPLACES ISSUE DATE: JAN 2018 APPROVED BY: PAGE 8 OF 15 PRODUCT INFORMATION MANUALSECTION.

9 1A ALUMINIUM VENETIAN BLINDS17-4 Ultimate Venetian Blind Version exTenSIon braCkeTSInSTall The blIndSIde guIdIngINSTALLING THE BLINDS imply slip the headrail onto the front hooks of the bracket, push inwards and twist the back of the headrail upwards in one motion. The headrail will snap into DOWN BRACKETS (OPTIONAL) Hold-down Brackets are used to keep the bottom of the blind from swaying in the may be Reveal (inside the window frame) or Face (outside the window frame) mounted. With the blind fully lowered, place the hold-down brackets onto the pins of the bottom rail and mark the hole locations. Attach the bracket with screw/s supplied (20mm x 6# Panhead).

10 Place the bottom rail into the brackets, open and close the : The drop ordered on a venetian blind is measured in the closed position from the top of the headrail to the lowest position on the bottom MOUNTING BRACKETS (OPTIONAL)These brackets are used in lieu of the spring mounting Instructions:Add 10mm to the headrail size, this gives you the position to fit the outside edges of the end mounting brackets. End mounting brackets can be screwed through the top, back or side as indicated. Brackets are marked left or right. Use 2 Panhead 20 X 6 screws per bracket. If swivel brackets are required, locate evenly along the headrail ensuring not to foul the tape roll the Blind:Insert slide into the bracket which will be closest to the tilter and cordlock.