Anvil Pipe Hangers and Supports PRICE LIST and Condensed ...

1 Anvil pipe Hangers and SupportsPRICE LIST and Condensed Date: July 10, 2006 Cancels PRICE List of March 20, 2006 SUBJECT TO CHANGE WITHOUT NOTICEGO TO WEB SITE FOR MOST CURRENTLIST PRICE INFORMATION/CHANGESOR CONTACT AN Anvil obtain current ISO Certifications,Listings and other Approvals visit Anvil swebsite at Numbers are available upon contact your local Anvil AND TERMS OF SALE1. CONTROLLING PROVISIONS:These terms and conditions shall control with respect to any purchaseorder or sale of Seller's products. No waiver, alteration or modification ofthese terms and conditions whether on Buyer's purchase order or other-wise shall be valid unless the waiver, alteration or modification is specifi-cally accepted in writing and signed by an authorized representative DELIVERY.

2 Seller will make every effort to complete delivery of products as indicat-ed on Seller's acceptance of an order, but Seller assumes no responsi-bility or liability, and will accept no back charge, for loss or damage dueto delay or inability to deliver caused by acts of God, war, labor difficul-ties, accident, delays of carriers, by contractors or suppliers, inability toobtain materials, shortages of fuel and energy, or any other causes ofany kind whatever beyond the control of Seller. Seller may terminateany contract of sale of its products without liability of any nature, bywritten notice to Buyer, in the event that the delay in delivery or perfor-mance resulting from any of the aforesaid causes shall continue for aperiod of sixty (60) days.

3 Under no circumstances shall Seller be liablefor any special or consequential damages or for loss, damage, orexpense (whether or not based on negligence) directly or indirectly aris-ing from delays or failure to give notice of WARRANTY:Seller warrants for one year from the date of shipment Seller's manu-factured products to the extent that Seller will replace those havingdefects in material or workmanship when used for the purpose and inthe manner which Seller recommends. If Seller examination shall dis-close to its satisfaction that the products are defective, and an adjust-ment is required, the amount of such adjustment shall not exceed thenet sales PRICE of the defective products and no allowance will be madefor labor or expense of repairing or replacing defective products orworkmanship of damage resulting from the same.

4 Seller warrants theproducts which it sells of other manufacturers to the extent of the war-ranties of their respective makers. Where engineering design or fabrica-tion work is supplied. Buyer's acceptance of Seller's design or of deliv-ery of work shall relieve Seller of all further obligation, other thanexpressed in Seller's product warranty. THIS IS SELLER'S SOLE WAR-RANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND,EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MER-CHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEEDSELLER'S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BYSELLER AND EXCLUDED FROM THIS WARRANTY.

5 Seller neitherassumes, nor authorizes any person to assume for it, any other obliga-tion in connection with the sale of its engineering designs or warranty shall not apply to any products or parts of productswhich (a) have been repaired or altered outside of Seller's factory, inany manner; (b) have been subjected to misuse, negligence or acci-dents; (c) have been used in a manner contrary to Seller's instructionsor recommendations. Seller shall not be responsible for design errorsdue to inaccurate or incomplete information supplied by Buyer or SELLER'S LIABILITY:Seller will not be liable for any loss, damage, cost of repairs, incidentalor consequential damages of any kind, whether based upon warranty(except for the obligation accepted by Seller under "Warranty" above),contract or negligence, arising in connection with the design, manufac-ture, sale, use or repair of the products or of the engineering designssupplied to Buyer5.

6 RETURNS:Seller cannot accept return of any products unless its written permis-sion has been first obtained, in which case same will be credited subjectto the following: (a) all material returned must, on its arrival at Seller'sPlant, be found to be in first-class condition; if not, cost of putting insaleable condition will be deducted from credit memoranda; (b) a han-dling charge deduction of twenty percent (20%) will be made from allcredit memoranda issued for material returned; and (c) transportationcharges, if not prepaid will be deducted from credit SHIPMENTS:All products sent out will be carefully examined, counted and cost of any special packing or special handling caused by Buyer'srequirements or requests shall be added to the amount of the order.

7 Noclaim for shortages will be allowed unless make in writing within ten(10) days of receipt of a shipment. Claims for products damaged or lostin transit should be made on the carrier, as Seller's responsibility ceas-es, and title passes, on delivery to the SPECIAL PRODUCTS:Orders covering special or nonstandard products are not subject to can-cellation except on such terms as Seller may specify on PRICES AND DESIGNS:Prices and designs are subject to change without notice. All prices Point of shipment, unless otherwise TAXES:The amount of any sales, excise or other taxes, if any, applicable to theproducts covered by this order, shall be paid by Buyer unless Buyer pro-vides Seller with an exemption certificate acceptable to the taxing authori-ties.

8 10. NUCLEAR PLANTS:Where the products, engineering design or fabrication are utilized innuclear plant applications, Buyer agrees: (a) to take all necessary stepsto add Seller as an insured under the property insurance policies andnuclear liability insurance policies covering the nuclear power plantfacility at which the products, engineering design or fabrication are uti-lized; (b) to obtain a waiver of any claims against Seller by the nuclearpower plant owner and a waiver of subrogation against Seller from suchowners' property insurer with respect to any loss or damage to propertyat the nuclear power plant site arising from the products, engineeringdesign or fabrication; (c) to indemnify and hold Seller harmless againstall claims, costs, expenses (including attorneys fees), loss, damage, orother liability that Seller would not have incurred but for Buyer's failureto comply with subsections (a) and (b) of this Section 10.

9 And (d) toindemnify and hold Seller harmless with respect to any personal injury(or death), property damage or other loss resulting from a nuclear inci-dent which is caused directly or indirectly by defective design, materialor workmanship furnished by MINIMUM INVOICE:$ plus TERMS:Cash, net 30 days unless otherwise : All orders are accepted on the basis of prices in effect at the timeof : The prices and terms quoted, there will be added any manufac-turers or sales tax payable on the transaction under any ALLOWANCE:All prices are point of shipment. On (non-engineered product)shipments of 2,500 pounds or more, rail freight or motor freight at thelowest published rates is allowed to all continental rail points or highway points listed in published tariffs (Alaska and Hawaiiexcluded).

10 In no case will more than actual freight be :All Constant Supports , Spring Hangers , Sway Braces and allEngineered, Bundled and Tagged hanger Assemblies are Plants,with No Freight 2 Refer to Anvil pipe hanger catalog PH-2005 for additional informationProtective coatings*:Net PRICE /cwt*Min. Charge*Hot Dip Galvanizing$ $ Plating (Zinc & Copper)$ $ (one coat Red Oxide Primer) $ $ Spec. TT-P-636 Sand Blast$ $ CoatingPOAPOA*Above prices not subject to discount Some products cannot be Galvanized due to design (swivels, hinged sectionsor mating components with close tolerances).