亞度聚司股司有限乙司 ASIA POLYMER ... - apc.com.tw

1 1/3 ASIA POLYMER CORPORATION SAFETY DATA SHEET 1. Chemical Product And Company Identification Product Name: Low Density Polyethylene(LDPE) Other Name: POLYMER -E Product NO.: C4100 C7100 C1400 F1100 F2200 F2201 F3201 F8201 H0100 H0105 M2100 M5100 Recommended use: the thin film, injection and extrusion. Names, addresses, and phone numbers of the manufacturer or supplier: ASIA POLYMER CORPORATION (APC) , Industrial 1st Rd. Lin-Yuan Kaohsiung (832), Taiwan, (07)704-0988 Emergency contact phone numbers/fax numbers:(07)704-0988/(07)641-2609 2. Hazards Identification Product hazard class: N/A Label content: N/A Other hazards: N/A 3.

2 Composition/Information on Ingredients Pure material: Chinese and English name: (Low Density Polyethylene) Synonyms: LDPE Chemical Abstracts Service No.(CAS No.): 009002-88-4, Content(%):> The hazardous ingredients(% of the content): None Mixtures: Chemical properties: None Chinese and English names of the hazardous ingredients Concentration or concentration ranges (ingredient percentage) None N/A 4. First-aid measures: The first aid measures for different exposure routes: Inhalation: Dust may cause slight irritation, no significant health effects. Skin contact: Rapidly wash off with cool water or shower, if molten material comes in contact with the skin.

3 Do not attempt to remove the material from skin. Call the physician. Eye contact: Dust may cause slight irritation. Fume may cause eye irritation as mid discomfort. Ingestion: None The most important symptoms and hazardous effects: N/A The protection of first-aiders: No need Notes to physicians: Let physicians know the symptom of patient. 5. Fire Fighting Measures Suitable fire extinguishing media: water, water fog, foam, CO2, dry chemical extinguishers. Specific hazards may be encountered during fire-fighting: Carbon Monoxide (CO) and irritating smoke may emitted when burned without sufficient oxygen. Specific fire-fighting methods: Use water spray to cool fire exposed surface and to protect personal.

4 Shut off fuel to fire. Special equipment for the protection of fire-fighters: Wear positive pressure, self-contained breathing apparatus in any closed space. 2/3 ASIA POLYMER CORPORATION SAFETY DATA SHEET 6. Accidental release Measure Personal precaution: N/A Environmental precaution: N/A Method for cleaning up: Clean up with a shovel and/or vacuum cleaner. 7. Handling and Storage: Handling: Good general ventilation should be sufficient for most conditions. During the processing of the material, avoid inhalation of fumes and scald of molten material. Storage: Store in a cool, dry place with good ventilation.

5 Away from source of heat and direct sunlight. Storage silo must be grounded to prevent static charge. Proper ventilation is recommended to control dust formation. 8. Exposure Control / Personal Protection Engineering Control: N/A Control parameters: 8 hours time average exposure limits/Short-term exposure limits/maximum exposure limits:--- biological standard: N/A Personal protective equipment: Respiratory protection: Use dust-proof mask. Hand protection: Use rubber gloves. Use thermal resistant gloves, when needed. Eye Protection: Use safety goggles, when dust is present. Skin & body protection: No precautions other than clean body-covering clothing should be needed.

6 Hygiene Procedures: N/A 9. Physical and Chemical Properties / Characteristics Appearance (physical static, color, etc): Translucent white solid pellets Odor: negligible Odor threshold: N/A Melting Point / Melting Range: 100~111к pH Valve: Not applicable Boiling point/boiling point range: Not applicable Flammability (solid, gas): Not applicable Flash Point: к Test Method: Close Cup Decomposition Temperature: Not applicable Auto-ignition Temperature: 349к Exposure limit: Not applicable Vapor Pressure: Not applicable Vapor Density: Not applicable Density: ~ g/cm3 Solubility In Water: Nil. Portion coefficient(n-octanol/water, log Kow): N/A Evaporation rate: Not applicable 10.

7 Stability and Reactivity Stability: Stable at room temperature. Possible hazardous reactions under specific conditions: N/A Conditions To Avoid: Avoid Storage Temperature over Suggested Process Temperature. Materials to avoid: Strong oxidizing agents Hazardous decomposition procedure: Fumes from decomposition of this material may include carbon dioxide, carbon monoxide. 3/3 ASIA POLYMER CORPORATION SAFETY DATA SHEET 11. Toxicological information Routes of exposure: Dust or fume may cause slight irritation. Symptoms: N/A Acute toxicity: N/A Chronic toxicity or long term toxicity: N/A 12.

8 Ecological information Ecotoxicity: Difficult to biodegradable. It can be recycled using suitable technologies. Persistence and degradability: Difficult to nature degrade. Bioaccumulative potential: N/A Mobility in soil: N/A Other adverse effects: To burn arbitrarily of this material may emit hazardous gas. 13. Disposal information Disposal Information: Disposal must be done in accordance with existing regulations. Bury in landfill or burn in an approved incinerator in accordance with applicable regulations. 14. Transport Information International Regulatory For Transport This material is not considered hazardous according to The General Rule for Classification and Hazard Communication of Chemicals (RIR-ADR IMO IATA IMDG FS A11).

9 United Nations Number(Un-No): N/A UN proper shipping name: N/A Transport hazard class(es): N/A Packing group: seabulk, 25 Kg bag, Jumbo bag Marine pollutant(YES/NO): NO Special transport measures and precautionary condition: N/A 15. Regulatory Information: Applicable regulation: 1. Regulation of Safety and Health Council of Taiwan s Labor. Method of Clean Storage and Facility standard for Industrial Waste In Taiwan. of Labelling and Hazard Communication of Dangerous and Harmful Materials. s Traffic Eegulation Hazardous Materials Establishment Standards and Safety Control Regulations. 16. Other Information: Literature reference None Organization that prepared the MSDS Name: Asia POLYMER Corporation Lin Yuan Plant Address/telephone number: No.

10 3 , Industrial 1st. Rd Lin-Yuan Kaohsiung (832)/+886-(07)704-0988#1225 Person who prepared the MSDS Title: Engineer Name: Chun-Li Wang Date that the MSDS was prepared 11. May 2017 Note The information provided herein is believed to be accurate at issue date. It is not intended for any warranty purposes. Regulatory requirements may be different for different geographical regions and are subject to change. It is the user s responsibility to ensure the compliance with local regulations and laws. APC urges our customers or users of our products to study and understand the content and data provided in this MSDS.