ATC 100 B Series Porcelain Superchip Multilayer …

1 ATC 100 B Series Porcelain Superchip Multilayer Capacitors Case B Size Capacitance Range (.110 x .110 ) pF to 1000 pF High Q Ultra-Stable Performance Low ESR/ESL High Self-Resonance Low Noise Established Reliability (QPL) Extended WVDC up to 1500 VDCATC, the industry leader, offers new improved ESR/ESL perfor-mance for the 100 B Series RF/Microwave Capacitors. This Series is now available with extended operating temperatures up to 175 C. High Density Porcelain construction provides a rugged, hermetic functional applications: Bypass, Coupling, Tuning, Feedback, Impedance Matching and DC circuit applications: UHF/Microwave RF Power Amplifiers, Mixers, Oscillators, Low Noise Amplifiers, Filter Networks, Timing Circuits and Delay TESTSATC 100 B Series Capacitors are designed and manufactured tomeet and exceed the requirements of EIA-198, MIL-PRF-55681 and SHOCK: MIL-STD-202, Method 107, Condition RESISTANCE: MIL-STD-202, Method VOLTAGE HUMIDITY:MIL-STD-202, Method 103, Condition A, with Volts DC ap-plied while subjected to an environment of 85 C with 85% relative humidity for 240 hours TEST:MIL-STD-202, Method 108, for 2000 hours, at 125 C.

2 Voltage Applied:200% of WVDC for capacitors rated at 500 volts DC or less. 120% of WVDC for capacitors rated at 1250 volts DC or less. 100% of WVDC for capacitors rated above 1250 volts DC. ELECTRICAL AND MECHANICAL SPECIFICATIONSQUALITY FACTOR (Q): greater than 10,000 at 1 COEFFICIENT OF CAPACITANCE (TCC):+90 20 PPM/ C (-55 C to +125 C)+90 30 PPM/ C (+125 C to +175 C)INSULATION RESISTANCE (IR) pF to 470 pF: 106 Megohms min. @ +25 C at rated WVDC. 105 Megohms min. @ +125 C at rated pF to 1000 pF: 105 Megohms min. @ +25 C at rated WVDC. 104 Megohms min. @ +125 C at rated above +125 C is derated by one order of VOLTAGE (WVDC): See Capacitance Values Table, page WITHSTANDING VOLTAGE (DWV):250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds. 150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds. 120% of WVDC for capacitors rated above 1250 volts DC for 5 : Less than ( or pF), whichever is EFFECTS: NonePIEZOELECTRIC EFFECTS: None(No capacitance variation with voltage or pressure).

3 CAPACITANCE DRIFT: ( or pF), whichever is TEMPERATURE to 330 pF: from -55 C to +175 C360 to 1000 pF: from -55 C to +125 CTERMINATION STYLES:Available in various surface mount and leaded styles. See Mechanical Configurations, page STRENGTH: Terminations for chips and pellets with-stand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method # 001-807 Rev. R; 2/17 ATC 100 B Capacitance ValuesVRMS = X WVDC SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. PLEASE CONSULT : EXTENDED WVDC DOES NOT APPLY TO CDR PART NUMBER CODE ATC100 B 91 0 J W 500 X T Series Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. Capacitance Tolerance Laser Marking WVDC Termination CodePackagingT - Tape and Reel, 1000 pc.

4 Qty.*TV - Vertical Orientation of Product, Tape and Reel, 1000 pc. qty.*I - Special Packaging. Consult Factory. *Consult ATC for other quantitiesATC Cap-Pac packaging (100 pc. qty. std.) is also available. For this option, leave last field above part number refers to a 100 B Series (case size B) 91 pF capacitor, J tolerance ( 5%), 500 WVDC, with W termination (Tin/ Lead, Solder Plated over Nickel Barrier), laser marking and Tape and Reel additional information and catalogs contact your ATC representative or call direct at (+1-631) factory for additional performance accepts orders for our parts using designations with or without the ATC prefix. Both methods of defining the part number are equivalent, , part numbers referenced with the ATC prefix are interchangeable to parts referenced without the ATC prefix. Customers are free to use either in specifying or procuring parts from American Technical TOLERANCECodeBCDFGJKMTol.

5 PF pF pF 1% 2% 5% 10% 20%2 CAP. CODECAP. (pF) WVDC STD. CODECAP. (pF) WVDC STD. CODECAP. (pF) WVDC STD. CODECAP. (pF) WVDC STD. , CB, C, , C, DB, C, J, K, MF, G, J, K, M500150020022024027030033036039043047051 0560620680750820910101111121131202224273 0333639434751566268758291100110120130F, G, J, K, M5003001500 1000151161181201221241271301331361391431 4715115616216817518219111021501601802002 2024027030033036039043047051056062068075 08209101000F, G, J, K, M300200100501000600300 EXTENDED VOLTAGEEXTENDED VOLTAGEEXTENDED VOLTAGEEXTENDED VOLTAGEEXT VOLTEXT VOLTEXTENDED VOLTAGEEXT VOLTAMERICAN TECHNICAL North 100 B Capacitors: Mechanical Configurations3 ATC Series & CASE SIZEATC TERM. CODEMIL-PRF-55681 CASE SIZE & TYPEOUTLINESW/T IS A TERMINATION SURFACEBODY DIMENSIONS INCHES (mm)LEAD AND TERMINATION DIMENSIONS AND MATERIALSLENGTH (L)WIDTH (W)THICKNESS (T)OVERLAP (Y)MATERIALS100 BWCDR14 BGBS older +.

6 020 ( + )110 .015 ( ).102 ( ) ( ) .010 ( )TIn/ Lead, Solder Plated over Nickel Barrier +.035 ( + ).110 .015 ( )Heavy Tin/Lead Coated, over Nickel Barrier Termination100 BTN/AB Solderable Nickel +.020 ( + ).110 .015 ( )RoHS CompliantTin Plated over Nickel Barrier Termination100 BCACDR13 BGBGold .0. 15 020 ( + ).110 .015 ( )RoHS CompliantGold Plated over Nickel Barrier Termination100 BMSCDR21 BGB .015 ( ).110 .015 ( ).120 ( ) (LL)Width (WL)Thickness ( TL).250 ( ) .005 ( ).004 .001 (.102 .025)100 BARCDR22BG B Axial ( ) max. 100 BRRCDR24 BGB Radial RibbonLLLWLWTLLLWLWT100 BRWCDR23 BGB Radial Wire LLLWTLLLWT .145 .020 ( ).500 ( )in. min.#26 AWG., .016 (.406) dia. nominal100 BAWCDR25 BGB Axial Wire LLWTL LLWTLAMERICAN TECHNICAL North lead styles available: Narrow Microstrip (NM), Narrow Axial Ribbon (NA) and Vertical Narrow Microstrip (H).

7 Other lead lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. For a complete military catalog, request American Technical Ceramics document ATC 100 B Non-Magnetic Capacitors: Mechanical ConfigurationsAdditional lead styles available: Narrow Microstrip (DN), Narrow Axial Ribbon (GN) and Vertical Narrow Microstrip (HN). Other lead lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS T W 910J 910J L L T Normal High Density .065 .045 .050 .030 .075 .075 .135 .175 A Min. B Min. C Min. D Min. Cap Value pF Normal High Density .090 .070 .050 .030 .075 .075 .135 .175 pF Normal High Density .110 .090 .050 .030 .075 .075 .135 .175 Normal High Density .120 .100 .050 .030 .075 .075 .135 .175 Normal High Density .130 .110 .050 .030 .075 .075 .135 .175 Horizontal Mount > 510 pF to 510 pF All values B A C D B 100B Pad Size Case B Vertical Mount Vertical Electrode Orientation Horizontal Electrode Orientation AMERICAN TECHNICAL North Mounting Pad DimensionsATC Series & CASE SIZEATC TERM.

8 CODEMIL-PRF-55681 CASE SIZE & TYPEOUTLINESW/T IS A TERMINATION SURFACEBODY DIMENSIONS INCHES (mm)LEAD AND TERMINATION DIMENSIONS AND MATERIALSLENGTH (L)WIDTH (W)THICKNESS (T)OVERLAP (Y)MATERIALS100 BWNM eets Require-mentsBNon-Mag Solder +.025 ( + )110 .015 ( ).102 ( ) ( ) .010 ( )TIn/ Lead, Solder Plated over Non-Magnetic Barrier Termination100 BPNM eets Require-mentsBNon-Mag +.035 ( + )110 .015 ( )Heavy Tin/Lead Coated, over Non-Magnetic Barrier Termination100 BTNM eets Require-mentsBNon-Mag Solderable +.025 ( + .015 ( )RoHS CompliantTin Plated over Non-Magnetic Nickel Barrier Termination100 BMNM eets Require-mentsB Non-Mag .015 ( ).110 .015 ( ).120 ( ) (LL)Width (WL)Thickness ( TL).250 ( ) .005 ( ).004 .001 (.102 .025)100 BANM eets Require-mentsB Non-Mag Axial ( ) Require-mentsB Non-Mag Radial RibbonLLLWLWTLLLWLWT100 BRNM eets Require-mentsB Non-Mag Radial Wire.)

9 020 ( ).500 ( )in. min.#26 AWG., .016 (.406) dia. nominal100 BBNM eets Require-mentsB Non-Mag Axial Wire LLWTL LLWTL5 ATC 100 B Performance DataESR VS CAPACITANCEATC Series 100, CASE (Typical)150 MHz1000 MHz500 MHzQCAPACITANCE(56 pF to 1000 pF)Q VS CAPACITANCEATC Series 100, CASE B101001000101001000 CAPACITANCE (pF)(56 pF to 1000 pF)Q(Typical)1000 MHz500 MHz150 MHzESR VS. CAPACITANCE ATC Series 100, CASE BQ VS. CAPACITANCE ATC Series 100, CASE BCAPACITANCE (pF) (56 pF to 1000 pF)CAPACITANCE (pF) (56 pF to 1000 pF)ESR (Ohms)QSERIES RESONANCE VS CAPACITANCEATC Series 100, CASE (GHz)(Typical)TC= +90 20 PPM/ C (-55 C to +125 C)TC= +90 30 PPM/ C (+125 C to +175 C) RESONANCE VS. CAPACITANCE ATC Series 100, CASE BCAPACITANCE CHANGE VS. TEMPERATURE ATC Series 100, CASE BCAPACITANCE (pF) TEMPERATURE (Degrees C)FREQUENCY (GHz)% CHANGE IN CAPACITANCEESR VS CAPACITANCE (Ohms)(Typical)1000 MHz150 MHz500 MHzESR VS CAPACITANCEATC Series 100, CASE BCAPACITANCE( pF to 51 pF)10100100010000100000110100(Typical)15 0 MHz1000 MHz500 MHzESR VS.

10 CAPACITANCE ATC Series 100, CASE BQ VS. CAPACITANCE ATC Series 100, CASE BCAPACITANCE (pF) ( pF to 51 pF)CAPACITANCE (pF) ( pF to 51 pF)ESR (Ohms)QAMERICAN TECHNICAL North of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC s website at Click on the link for Terms and Conditions of has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. 1996 American Technical Ceramics Corp. All Rights Reserved ATC # 001-807 Rev. R 2/17 ATC 100 B Performance MHz500 MHz1000 MHzDotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 30 MHzCURRENT RATINGVS CAPACITANCEATC Series 100, CASE B110100101001000 CAPACITANCE(56 pF to 1000 pF)RMS CURRENT (Amps)Dotted line = Power dissipation limitedSolid line = Voltage limited (Vrms)150 MHz1000 MHz500 MHz30 MHzThe current rating is based on a 65C mountingsurface and a device thermal resistance (U)of20C/W.