Transcription of ATLAS STEELS Pressure Rating Tables for Stainless Steel Pipe
1 ATLAS STEELST echnical Services Departmentfreecall (Australia) 1800 818 599e-mail Rating Tables for Stainless Steel PipeNotes to the Tables of allowable working converttomultiply bymegapascals (MPa) pounds/sq. inch (psi) (MPa) (MPa) kilograms/mm (kgf/mm ) (MPa) (MPa) kilopascals (kPa)1000 LIMITATION OF LIABILITYR evised: PJM, 2/09/2010 TheinformationcontainedinthisAtlasSteels seriesoftablesisnotanexhaustivestatement of all relevant information. It is a general guide for customers to theproducts and services available from ATLAS STEELS and no representation is made orwarranty given in relation to this information or the products or processes Grade 304 and 316 design pressures are only valid at temperatures above 538 C ifcarbon content is or Allowable working pressures are given in megapascals (MPa).
2 Conversions to otherunits are:1. This data is intended to provide a general guide. It must not to be relied upon in theabsence of competent professional These allowable pressures were calculated by the formula given in AS 4041-2006" Pressure Piping", clause Other design codes may give different allowablepressures. The original specifications must be consulted for full These calculations assume Piping Class 1 so only apply if this level of pipingconstruction quality has been Calculations are for seamless pipe to specification ASTM A312/A312M.
3 An additionalweld joint efficiency factor of 85% must be allowed for standard welded pipe , andallowance made for corrosion or wear loss if 1 of Steel GRADE TP304 PIPES - ASTM A 312, SeamlessALLOWABLE WORKING Pressure AT TEMPERATURET emperature ( C):5010015020025030032535037540042545047 5500525550575600625650675700725 Design Strength (MPa):1381381381301221151131111101071051 03101100979078645141332721 SizeSchWTAllowable Working Pressure (MPa)DNNPSmmNo(mm)10 10S
4
5
6 - refer to the associated Notes to this 2 of PJM 2/09/2010 Stainless Steel GRADE TP304L PIPES - ASTM A 312, SeamlessALLOWABLE WORKING Pressure AT TEMPERATURET emperature ( C):5010015020025030032535037540042545047 5500525 Design Strength (MPa):1151151151091039896949392908884736 0 SizeSchWTAllowable Working Pressure (MPa)DNNPSmmNo(mm)
7 10 10S
8
9 - refer to the associated Notes to this 3 of PJM 2/09/2010 Stainless Steel GRADE TP316 PIPES - ASTM A 312, SeamlessALLOWABLE WORKING Pressure AT TEMPERATURET emperature ( C):5010015020025030032535037540042545047 5500525550575600625650675700 Design Strength (MPa):1381381381331251191171141121111101 08107106106103958165503930 SizeSchWTAllowable Working Pressure (MPa)DNNPSmmNo(mm)10 10S