Transcription of ATN Series Multiservice Access Equipment …
1 ATN Series Multiservice Access Equipment Specification All Rights Reserved ATN Series Multiservice Access Equipment Specification Properties ATN 910 ATN 950 Capacity Switch capacity:13 Gbps Forwarding Switch capacity:16 Gbps Forwarding capacity:12 Mpps Slots 1 for CXP and 2 for interface boards 2 for CXP and 6 for interface boards Dimension (W D H) 442mm 220mm 442mm 220mm Height (U) 1U 2U Typical Power consumption 50W 95W Weight Interface type GE/FE,Smart E1,T1 ,xDSL L2 feature Support , , IEEE IEEE ; Support STP/RSTP/MSTP,RRPP,and VLAN Switch L3 feature Support OSPFv2,RIPv2,and IS-IS,BGPv4,static routing protocols Support dynamic ARP and static ARP table entries Support VLAN IF interface MPLS feature Support LDP,RSVP-TE Support L2 VPN(VPLS/H-VPLS/VLL) Support MPLS/BGP L3 VPN Support MPLS-TP OAM QoS Support HQoS Network Reliability Support GR Support LSP1:1,PW Redundancy,IP/LDP FRR,TE FRR,VPN FRR Clock Support 1588v2,1588 ACR,E1/T1 Line Clock,synchronous Ethernet clock Temperature -20 C to +60 C Humidity Long term: 5% RH to 85% RH, non-condensing Short term: 0% RH to 95% RH, non-condensing
