AUTOMATIC & MANUAL WINDING MOVEMENT …

1 9100, 9110, 9120, 9130, 9132 Basic specificationFunctionAutomatic & MANUAL windingDisplay by means of hands: hour, minute, calendarDay / Month / 24 Hours display by means of handsPower reserve displayStop second deviceShock-absorber device for balance staffTechnical characteristicsBalanceable weight of handsSecond hand Max. N mMinute hand Max. N mHour hand Max. N mSmall handMax. N mPower reserve handMax. N mHands fitting forceSecond hand Max. 30 NMinute hand Max. 50 NHour hand Max. 50 NSmall handMax. 30 NPower reserve hand Max.

2 30 NLift angle51 Casing Non-corresponding to "Divers' watches" defined by ISO6425 Time performance Accuracy of the mechanical watch is different from the daily rate of the quartz watch and the accuracy will changemaximum of several ten seconds during rewinding the spring, then the accuracy of the half WINDING condition will be different from that of full WINDING condition.<Time performance measurement condition>AccuracyMeasure within lapse of 10 60 minutes from full WINDING with differenceMeasure accuracy in 4 different postures shown on the right picture within lapse of 10 ~ 60 minutes from full WINDING .

3 Direction of 4 postures Date Dial side Up 6 o'clock side up 9 o'clock side up 3 o'clock side upRunning timeMeasure the running time from full WINDING . The mainspring becomes fully winded by rotating the ratchet wheel times (turning the crown 40 times).Posture differenceRunning time-10 30 seconds/dayUnder 40 seconds/ dayMore than 40 hoursVibration frequency28800 vibrations per hourAccuracyJewels26 JewelsCal. 91** AUTOMATIC & MANUAL WINDING MOVEMENT WITH MULTIFUNCTIONT otal fitting diameter '''Overall diameter AUTOMATIC WINDING structure WINDING direction : Clockwise (seeing from case back side)Operating methodWinding the mainspring, adjusting the hand, month/day/date is done by the below procedure.

4 (1) WINDING the mainspringAutomatic WINDING watch can be also MANUAL -winded by turning the crown in "A" 15 20 times clockwise until second hand starts to move naturally.(2)Adjusting DayAdjust the day by rotating the crown counter-clockwise in "B" position.(3) Adjusting dateAdjust the date by rotating the crown clockwise in "B" position.(4)Adjusting timeRotate the crown in "C" position and adjust the standard check if it is morning or afternoon and adjust correctly.(5)Adjusting monthPush the button "D" and adjust the month. If the button is not pushed to the end, the month is not changed partsWinding stemPlastic MOVEMENT holder500-002 x 1065-A05 x 1 Mainspring windingDay & Date adjustingMonth adjustingTime adjustingPower reserve displayDay display24 Hour displayMonth displayDate displayVariationFeatureThese specifications might be changed without prior notice.

5 Power Reserve 24 Hour Month 9132 Day 9100 HourMinuteSecond 9120 Date9130911091109120913091329100