Automation system SIMATIC S7-1500, ET 200MP - Siemens

1 Automation system _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ SIMATIC S7- 1500 , ET 200MP Automation system system Manual 12/2014 A5E03461182-AC Preface Documentation guide 1 system overview 2 Application planning 3 Installation 4 Wiring 5 Configuring 6 Basics of program processing 7 Protection 8 Flexible Automation concepts 9 Commissioning 10 SIMATIC memory card 11 CPU display 12 Maintenance 13 Test functions and fault resolution 14 Technical specifications 15 Dimension drawings A Accessories/spare parts B Service & Support C Siemens AG Division Digital Factory Postfach 48 48 90026 N RNBERG GERMANY

2 A5E03461182-AC 12/2014 Subject to change Copyright Siemens AG 2013 - 2014. All rights reserved Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken.

3 WARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION indicates that minor personal injury can result if proper precautions are not taken. NOTICE indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/ system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

4 Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens . Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

5 The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. Trademarks All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

6 Automation system 4 system Manual, 12/2014, A5E03461182-AC Preface Purpose of the documentation This documentation provides you with important information on how to configure, install, wire and commission the S7- 1500 Automation system /ET 200MP distributed I/O system . Basic knowledge required A basic knowledge of Automation technology is required to understand the documentation. Scope of validity of the documentation This documentation is valid for all products from the SIMATIC S7- 1500 and SIMATIC ET 200MP product families. Conventions STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the configuration and programming software "STEP 7 (TIA Portal)".

7 Please also observe notes marked as follows: Note A note contains important information on the product described in the documentation, on the handling of the product or on the section of the documentation to which particular attention should be paid. Preface Automation system system Manual, 12/2014, A5E03461182-AC 5 Special information Note Important note for maintaining operational safety of your plant Plants with safety-related features are subject to special operational safety requirements on the part of the operator. Even suppliers are required to observe special measures during product monitoring.

8 This is why we inform you about product developments and features that are or may become important for the operation of plants with regard to safety in a special newsletter. You need to subscribe to the corresponding newsletter to ensure that you always remain up- to-date and are able to make any necessary changes to your plant regarding operational safety should the need arise. Please go online ( ) and register for the following newsletters: SIMATIC S7-300/S7-300F SIMATIC S7-400/S7-400H/S7-400F/FH SIMATIC S7- 1500 / SIMATIC S7-1500F distributed I/O SIMATIC Industrial Software Select the "Current" check box for these newsletters.

9 Note When F-CPUs are used in safety mode, note the description of the fail-safe system SIMATIC Safety Programming and Operating Manual SIMATIC Safety - Configuring and Programming ( ). Note Product information The product information on the S7- 1500 Automation system /ET 200MP distributed I/O system contains: Module overview of SIMATIC , S7- 1500 and ET 200MP Additions to the documentation The product information can be found on the Internet ( ). Recycling and disposal The products are low in pollutants and can be recycled. For environmentally compliant recycling and disposal of your electronic waste, please contact a company certified for the disposal of electronic waste.

10 Preface Automation system 6 system Manual, 12/2014, A5E03461182-AC Additional support Information about technical support can be found in the appendix to this documentation. The range of technical documentation for the individual SIMATIC products and systems can be found on the Internet ( ). The online catalog and the ordering system are available on the Internet ( ). Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept.