자동화시스템 Automation Systems - nawoo.com

1 SYSTEMA utomation Systems - - - - - - - - - - (x-ray), (r-ray) , , ..Applications include- Aerospace- Aircraft- Foundry/Castings- Munitions- Nuclear components- Testing laboratories- General welding- Investment castings- Popeline- Shipbuilding- Other applications demanding high and productivityRadiographic Testing Equipment .. , .CONTENTSNDT TOTAL SOLUTIONC astream INDUSTREX Product PICO RAY Industrial PICO RAY X-rayIndustrial X-ray Equipment X-ray Gamma Ray Radiography Equipment Exposure Accessories Darkroom Equipment Film Viewers NDT Educational Kit Radiation Measurement Equipment Radiation Shielding, Safety Equipment Storage Bin & Facilities , , , 4 PAUT SYSTEMPAUT SYSTEMERW Tube In-Line Inspection SystemTube Inspection SystemCalibration BenchThe Calibration Bench is an optional stand designed to perform automatic calibration and calibration check sequences at standard inspection ranges : range.

2 From to mm Large size range : from to mm Wall thickness range : from 3 to 16 mmReferences defects (API):Longitudinal Notches (N5 or N10), or 1 inch lengthThru Drill Hole 1/8, 1/16 and 1/32 (TDH)Flat Bottom Hole or 1/8 (FBH)Side Drill Hole 1/8 (SDH)Designed for: Seamless, welded, and upset pipes Carbon, Stainless, and 13% Chrome pipes OD range: (2 3/8") to 508mm (20") WT range: 3mm (1/8") to 51mm (2") References: Longitudinal (L), transverse (T), oblique 11 /22 /45 /68 (O), Lamination (LAM) and wall thickness (WT) measurement Flaw Detection Weld Profiling and Tracking Automatic Weld TrackingUnique patented algorithm based on time-of-flight analysis perform automatic detection of the scarfing area and send feedback to the PLC to automatically adjust the inspection for each water wedge5 PAUT SYSTEMPAUT SYSTEMBar Inspection SystemSeamless Pipe Off-Line SystemDiameter ranges : range : from to mmLarge size range : from to mm Wall thickness range : from 5 to 25 mm References defects (API):Longitudinal Notches (N5 or N10), or 1 inch lengthThru Drill Hole 1/8, 1/16 and 1/32 (TDH)Flat Bottom Hole or 1/8 (FBH)Side Drill Hole 1/8 (SDH)T+, T-, L+, L-, Lamination, WT Type 1.

3 Diameter 10 to 60 mmType 2 : Diameter 15 to 120 mm (Round only) Diameter 20 to 120mm (Round & Square bars)Type 4 : Diameter 50 to 254 mm (Round and Square bars)Longitudinal Wave Inspection1. Flat Bottom Holes(FBH)FBH up to 120mmFBH up to 150mmFBH up to 200mmFBH up to 230mmFBH up to 254mm2. Side Drill Hole(SDH)Orientation : Longitudinal(axial direction)Diameter : : 15mmShear Wave Inspection1. Side Drill Hole(SDH)Orientation : Longitudinal(axial direction)Diameter : : 15mmLongitudinal notches- Depth SYSTEMUT SYSTEMSaw Spiral Pipe Inspection SystemImmersion UT SystemHelical SAW-Tubeslongitudinal seam SAW-TubesDiameter ranges : from 300 to 3600mm Wall thickness range : from 3 to 30mmStrip width : from 200 to 2000mmWidth of weld seam : from 8 to 30mmSpecifications : API, DNV, ISO Diameter ranges : from 400 to 3600mmWall thickness range : from 4 to 70mmStrip width : from 200 to 2000mmWidth of weld seam : from 8 to 70mm Detectable flaws : longitudinal and transverse defects in the weld laminations in the heat affected zone besides the weld7UT SYSTEMUT system Squirter Inspection system Line Speed : 80~122m/minDiameter: 8 ~ 16mm.

4 10 ChannelChevron Detection 2ch : 4 probes 2 transmission probes x 2 Detection performance : FBHL ongitudinal detection 8ch : 8 probesDetection performance : FBH8UT SYSTEMUT SYSTEMKTX , Cycle Time : 8min/4 EAReferences defects : (KS B0817, ASTM E1001-04, NF A09-340)Flat Bottom Hole : (FBH) : : 100rpm : 0 .1m m 4 Water Designed for: Inspection range of end : 50mmCarbon steel of Inner defect Round diameter range: 85 mm to 185 mm References: Side-drilled hole (SDH) SYSTEMUT system SystemTire Multi Layer Gauge system IN-LINE LAYER : 2~3 ( ) : +/-0 .2mm2 Water Cycle Time : 1min/EAReferences defects : KS B 0817, KS D 0232) : UT 4CH, ECT 3 CHUT (W) X (D) X (L) (W) X (D) X (L)ECT (W) X (D) X (L) 10UT SYSTEMUT system On-Line system Aluminum Bar Off-Line SystemCycle Time : 3min/EA : 232mm( ) X 1430mm(L) X (T) : 8 ChannelThickness measurement : 1channelFlaw detection Longitudinal wave 0 : 3channelFlaw detection Transverse wave T+, T- : 2channelFlaw detection Transverse wave L+, L- : 2channelReferences defects : ( ASTM KS UT ) , 5% (Longitudinal Notches (N5))Diameter ranges : range : from 40 to 90mm Large size range : from 100 to 350mm References defects.

5 ASTM B594-90 CLASS AA( ), A( ), B( ), C( )Flat bottom holes(FBH) Class AA( ) up to 100mm(Diameter)Class A( ) up to 150mm(Diameter)Class B( ) up to 250mm(Diameter)Class C( ) up to 350mm(Diameter)11UT SYSTEMUT system Gear Cycle Time : 40 Sec/EA References defects : KS D 0252 , ISO 9765 : FBHC ycle Time : 32 Sec/EA References defects : KS D 0252 , ISO 9765 : FBH12UT SYSTEMPAUT system Shaft Automated Train Wheel InspectionCycle Time : 7 Sec/EA Chevron Crack References defects : KS D 0252 , ISO 9765 : FBHR equirements Radial Defects: mm FBH for high speed train wheels. mm FBH for freight train wheels. Various depths from tread surface. Axial Defects: mm FBH for high speed train wheels. mm FBH for freight train wheels.

6 Various depths from rim surface Manufacturing InspectionRequirements Radial Defects: mm FBH for high speed train wheels. to mm FBH for freight train wheels. Various depths from tread surface. Axial Defects: or mm FBH in the web section. Up to 3 defects at different Inspection13PT SYSTEMPT system / / 14PT SYSTEMPT system Automobile Component PT System15PT SYSTEMMT SYSTEMA utomobile Component PT system 16MT SYSTEMMT SYSTEMCV Joint 17MT SYSTEMMT SYSTEMR ound/Square Bar 18MT SYSTEMMT system KTX , 19MT SYSTEMMT system Shaft Crank Shaft 20MT SYSTEMMT SYSTEMR eaction Arm AXLE 21MT SYSTEMET SYSTEMH orizontal Station Turbin Disk Hole Cycle Time : 3 Sec : Hole : Rotating Probe : Crackcrack specification : (W) X (D) X 2(L)22ET SYSTEMET SYSTEME ngine Block : Nortec 500 Cycle Time : 5 Sec.

7 : Surface Probe : Crackcrack specification : (W) X (D) X 5(L) : Nortec 500 Cycle Time : 5 Sec : : Surface Probe : Crackcrack specification : (W) X (D) X 5(L)23ET SYSTEMET system : Nortec 500 Cycle Time : 5 Sec : : Encircling Probe : 24ET SYSTEMET system / 1 : Nortec 500 Line Speed : 60m/minDiameter: 8~14mmProbe Type : Encircling ProbeReferences defects : (KS D ISO 9304)In-line testing of welded tube/pipe25ET SYSTEMET system / 2 Inspection system for using two sensor : Nortec 500 Cycle Time : 7 Sec : : Surface Probe : / 26ET SYSTEMET system : Nortec 600 Cycle Time : 20 Sec : : Surface Probe : Crackcrack specification : 1 : Nortec 500 Cycle Time : 15 Sec : : Surface Probe : 27ET SYSTEMET system Housing Gear Shaft : PICO-Eddy-APCycle Time : 5 Sec : : Surface Probe : Crackcrack specification : (W) X (D) X 2(L) : PICO-Eddy-APCycle Time : 12 Sec : 4 Point : Surface Probe : Crackcrack specification.

8 (W) X (D) X 2(L) (W) X (D) X 2(L)28ET SYSTEMET/UT system Warm Shaft Roll Inspection SystemEddy Current 8-channel testing Surface cracks, pores, inclusions, pinches Bruise sensorUltrasonic 1~2-channel testing(surface, straight) Surface , Sub-Surface cracks, bonding Up to 8-channel testing(30mm)Program Real-time display A-scan and C-scan Display Overlap Report for test result : Nortec 500 Cycle Time : 8 Sec : : Surface Probe : Crackcrack specification : (W) X (D) X 2(L)29RT SYSTEMRT system (PMJ) Digital RT( Tube) 30RT SYSTEMRT SYSTEMD igital RT(Pipe) SIEMENS SOLUTION PARTNER(2000 ) SCADA PLC PLC MCC, PDB HMIS iemens WIN-CC PC S/WCUSTOM S/WREPORT PROCESSAUTOMATION / / FACTORYAUTOMATION / / MONITORING &MANAGEMENT / CSU(Continuous Ship Unloader) ( ) (Dust Collector system ) ( ) ( ) ( )40MW (DPP) ( ) SK ( ) SK ( ) UF/RO ( )

9 , , InFACT HMI PLC PID PLC, , 305( ) TEL. 031 745 0088 / FAX. 031 745 0099