AV, HV, A - PHD Inc

1 (800) 624-85111-55 PHDV3AV, HV, AMajor Benefits Long life design for low maintenance nfpa repairable for extended life providinglong term savings Wide range of options for easy applicationand reduced design time Wide range of mounting styles for easy installation3/4", 1", 1-1/8" BORETIE ROD HYDRAULIC & PNEUMATIC nfpa CYLINDERSSERIES HVHydraulic ServiceSERIES AShortest Lengthanodized aluminum tube for long seal life and smooth motionaluminum alloy pistonpressure and wear compensating long life Nitrile piston seals (AV, HV)pressure and wear compensating long life Nitrile rod sealSERIES AVlong life bronze rod bushingsPTFE rod wiper for durabilitycorrosion resistant stainless steel rodAV, HV, AAV, HV, Azinc-plated alloy steel heads and caps for robust constructionCleanroom option available on Series AV and A Cylinders. See page (800) 624-85111-56 PHDV3AV, HV, AG-M-Vx--SCAVF12PD3/8 ROD--NOTES:1) For double rod cylinders, rod end options will be applied to both ends of ) For double rod cylinders, -_K extension will be applied to one end only (head end/primary mounting end).

2 3) Marked options provide additional cylinder flexibility, but may alter the ORDER SPECIFY:Spring Return/Double Rod End, Series, Mounting Style, Bore Size, Stroke, Port Control , and any Options. Also specify rod diameter if non-standard. Rod couplings and mounting attachments must be ordered RODTo be specified only when using a non-standard diameter. Rod diameters available are shown on page OR SHOCK PADD - Cushions on both endsDR - Cushion on rod endDC - Cushion on cap endB - Shock Pads on both endsBR - Shock Pad on rod endBC - Shock Pad on cap end(Cushions, Shock Pads, and Spring Return are not available on the same end of cylinder. Shock Pads and 3/4", 1", and 1-1/8" Cushions not available on Series HV.)STANDARD STROKE LENGTHS3/4" BORE1/4" to 12"1" BORE1/4" to 18"1-1/8" BORE1/4" to 18"All in 1/4" incrementsConsult PHD for longer SIZE3/4" BORE1/4" Std. Rod Thread1" BORE5/16" Std. Rod Thread1-1/8" BORE3/8" Std. Rod ThreadSERIESAV - 150 psi AirHV - 1500 psi - 150 psi AirOPTIONSA - Stroke Adjustment, 1/2" of adjustment standard (not available on Series HV)E - Magnetic Piston for PHD Hall Effect Switches (not available on Series A)G - #2 Rod End (see page 1-67 for dimensions) (see note 1)I - #4 Rod End, Female thread on rod (see page 1-67 for dimensions) (see note 1)H47 - Rodlok (Rod clamping device installed.

3 Not available with Z1 or on HV. See option page.)J - #2X Rod End, twice as long as standard thread (see page 1-67 for dimensions)_K - Extra Rod Extension, in 1/8" increments (see page 1-65) (see note 2)L - Coarse Thread Rod End (see page 1-67 for dimensions) (see note 1)M - Magnetic Piston for PHD Reed Switches (not applicable on Series A)N - Plain Rod End (see page 1-67 for dimensions) (see note 1)Q - Port in Position #1, must be specified if required with mounting style F ( F mounting tab on cap end)R - Ports in Position #2T - Ports in Position #3 ( F mounting tab on cap end)U - Ports in Position #4V - Fluoroelastomer SealsW - Close Tolerance Stroke, " stroke lengthY - SAE Ports (Series HV Only) 3/4, 1, 1-1/8" boreZ1 - Electroless Nickel Plate all ferrous parts excluding Rod EndsSPRING RETURNSC - Spring on cap endSR - Spring on rod end (Strokes available in 1/4" increments up to 6".) See option ROD ENDD - Double Rod End CylindersLeave blank if not STYLEF - Foot Mount, c bored thru holesB - Bottom Mount, tapped holes in head and capR - Rod Mount, tapped holes on front face of headT - Thread Mount, threaded snout on head (shipped with mounting nut)RF - Rod End FlangeCF - Cap End FlangeL - Pilot Mount, threaded snout and pilot diameter on head (shipped with mounting nut)P - Pivot Mount, pivot on capRR - Tierod Mount, tierods extend out rod endRC - Tierod Mount, tierods extend out cap endRRC - Tierod Mount, tierods extend out both endsPORT CONTROL BUILT-IN METEROUT FLOWCONTROL VALVEP - Flow control on both endsPR - Flow control on head endPC - Flow control on cap endORDERING DATA: SERIES A, AV, HV CYLINDERS; 3/4", 1", 1-1/8" BOREO ptions may affect unit length.

4 See dimensional pages and option information HALL EFFECT SWITCHESPART Type 10-30 VDC17504-2-06 PNP Type 10-30 VDC17523-2 NPN Type 10-30 VDC, Quick Connect17524-2 PNP Type 10-30 VDC, Quick ConnectCOMPACT REED SWITCHESPART or Source Type 10-30 VDC17509-3-06AC Type 110-120 VAC with Current Limit17522-2 Sink or Source Type 10-30 VDC, Quick Connect17529-3AC Type 110-120 VAC, Quick Connect with Current LimitSwitches are ordered separatelyCAD & Sizing AssistanceUse PHD s free online Product Sizing and CAD Configurator at SWITCH MOUNTING BRACKETSSERIESBORESIZE , HV3/4"-311"-321-1/8"-33 See Switches and Sensors section for complete ordering (800) 624-85111-57 PHDV3AV, HV, AENGINEERING DATA: SERIES A, AV, HV CYLINDERS; 3/4", 1", 1-1/8" BORECYLINDER FORCE CALCULATIONSI mperialF = P x AF = Cylinder ForcelbsP = Operating PressurepsiA = Effective Area (Extend or Retract)in2 SERIESCYLINDER BOREUNIT WEIGHTS (lb)ZERO STROKEADDER PER INCH OF STROKEPLAIN UNIT3 AVSERIES HVSERIES AOPERATING PRESSURESTANDARD CYLINDER (NO RODLOK)20 to 150 psi air40 to 1500 psi hyd*20 to 150 psi airCYLINDER WITH RODLOK30 to 150 psi air 30 to 150 psi airOPERATING TEMPERATURE-20 to +180 F [-29 to +82 C]-20 to +180 F [-29 to +82 C]-20 to +180 F [-29 to +82 C]STROKE TOLERANCE lubricated Permanently lubricatedMAINTENANCEF ield repairableField repairableField repairable*Hydraulic rating is based on non-shock hydraulic & Sizing AssistanceUse PHD s free online Product Sizing Application at FORCE TABLESERIESCYLINDER BOREROD DIAMETERROD DIRECTIONEFFECTIVE AREA FORCE lb/psiAIR CONSUMPTION at 80 psi CUBIC ft/in OF STROKE*DISPLACEMENT gal/inOF STROKE*AVHVA3/41.

5 Use the RETRACT figures for calculating double rod cylinder forces in both ALLOWABLE EXTEND STROKESERIESROD DIAMETERCYLINDER FORCE (lb)100200500100015002000300050003/4", 1", 1-1/8" AV, HV, A1/412"9"6"4"3" 5/1618"13"8"6"5" 3/826"18"12"9"7" 1/246"32"21"15"12" (800) 624-85111-58 PHDV3AV, HV, ADIMENSIONS: SERIES AV CYLINDERS; 3/4", 1", 1-1/8" SQRM DIAD WRENCH FLATFT + + + + STROKEXTTN3X NT THREAD13424X RT THREADBD SQ13424X DIA + DIA + + STROKEXBDN3X C BORED HOLESFOR DB SHCSBASIC CYLINDER DIMENSIONSB (MS9)CF (MF2)F (MS8) SEE NOTEL (MNR1)P (MP3)R (MR1)RF (MF1)F (MS8) - WITH PORT CONTROL ON CAP ENDT (MN1)1342SD1 + STROKEXB3X C BORED HOLESFOR DB + STROKEZG + THREADZG + INCOMPLETE THREAD1342 AMKM THREADW1CD DIA + STROKEUF2X 1/8 NPTAll standard rod ends have four wrench flats (two wrench flats with I option).(-Q or -T withoutPort Control)RC, RR, RRC (Includes RR & RC) RC & RC & RRC4X AA THREADEACH MOUNTINGSTYLEXY SQRM + DIARM1 + DIARM+ dimensions are reference only unless specifically SIZELETTER DIMENSIONAAAMBDCDDDBDNEEWFTKMNTRRMRM1 RTSDSD1SN3/4# # x x # # x x # # x x SIZELETTER DIMENSIONTFTNUFWAW1 XBXTZGXY3 POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: ADD in TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHIONSHOCK PADS: ADD in TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PADSPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO (+ STROKE) DIMENSIONS (2 x STROKE)F (MS8) MTG: 3/4" BORE UNITS ORDERED WITH AN OVERSIZE PISTON ROD WILL HAVE MTG.

6 TABS ON THE HEAD END. CONSULT PHD FOR DIMENSIONAL RODS: SEE PAGE 1-67 FOR OVERSIZE ROD (800) 624-85111-59 PHDV3AV, HV, ADIMENSIONS: SERIES HV CYLINDERS; 3/4", 1", 1-1/8" SQ4231E SQRM DIAD WRENCH FLATFT + + + + STROKEXTTN3X NT THREAD13424X RT THREAD13424X DIA + DIA + + STROKEXBDN3X C BOREDHOLES FOR DB SHCSBASIC CYLINDER DIMENSIONSB (MS9)CF (MF2)F (MS8) SEE NOTEL (MNR1)P (MP3)R (MR1)RF (MF1)F (MS8) - WITH PORT CONTROL ON CAP ENDT (MN1)13423X C BORED HOLESFOR DB SHCSDNZG + THREADZG + INCOMPLETE THREAD1342 AMKM THREADW1CD DIA + STROKE2X 1/8 NPTUFSD1 + + STROKEAll standard rod ends have four wrench flats (two wrench flats with I option).RC, RR, RRC (Includes RR & RC) RR & RR & RRC4X AA THREADEACH MOUNTINGSTYLEXY SQRM + DIARM1 + DIARM+ dimensions are reference only unless specifically SIZELETTER DIMENSIONAAAMBDCDDDBDNEEWFTKMNTRRMRM1 RTSDSD1SN3/4# # x x # # x x # # x x SIZELETTER DIMENSIONTFTNUFWAW1 XBXTZGXY3 POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: ADD in TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHIONSPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO (+ STROKE) DIMENSIONS (2 x STROKE)F (MS8) MTG: 3/4" BORE UNITS ORDERED WITH AN OVERSIZE PISTON ROD WILL HAVE MTG.

7 TABS ON THE HEAD END. CONSULT PHD FOR DIMENSIONAL RODS: SEE PAGE 1-67 FOR OVERSIZE ROD (800) 624-85111-60 PHDV3AV, HV, A13423X C BORED HOLESFOR DB SHCSDNXY + STROKE4231E SQRM DIAD WRENCH FLATFT + + + STROKEXTTN3X NT THREAD13424X RT THREADBD SQ13424X DIA + DIA + + STROKEXBDN3X C BORED HOLESFOR DB SHCSB (MS9)CF (MF2)F (MS8) SEE NOTESL (MNR1)P (MP3)R (MR1)RF (MF1)F (MS8) - WITH PORT CONTROL ON CAP ENDT (MN1) + + INCOMPLETE DIA + STROKE2X 1/8 NPTUFAll standard rod ends have four wrench flats (two wrench flats with I option).422 BASIC CYLINDER DIMENSIONSSD1 + + STROKERC, RR, RRC (Includes RR & RC) RR & RC & RRC4X AA THREADEACH MOUNTINGSTYLERM + DIARM1 + DIARM+ : SERIES A CYLINDERS; 3/4", 1", 1-1/8" BOREAll dimensions are reference only unless specifically SIZELETTER DIMENSIONAABDDDBDNEEWFTKMNTRRMRM1 RTSDSD1 SNTFTN3/4# # x x # # x x # # x x SIZELETTER DIMENSIONUFWAXBXTXY3 POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: ADD in TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHIONSHOCK PADS: ADD in TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PADSPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO (+ STROKE) DIMENSIONS (2 x STROKE)F (MS8) MTG: 3/4" BORE UNITS ORDERED WITH AN OVERSIZE PISTON ROD WILL HAVE MTG.

8 TABS ON THE HEAD END. CONSULT PHD FOR DIMENSIONAL RODS: SEE PAGE 1-67 FOR OVERSIZE ROD (800) 624-85111-61 PHDV3AV, HV, AXY SQ4231E SQRM DIAD WRENCH FLATBOTH ENDSFT THREADBOTH BOTH + (2 x STROKE)P+ + + (2 x STROKE) (MS9)F (MS8) SEE NOTEL (MNR1)R (MR1)RF (MF1)T (MN1)ZG + (2 x STROKE) THREADZG + (2 x STROKE) INCOMPLETE THREAD1342 AMKM THREADW12X 1/8 + C BORED HOLESFOR DB standard rod ends have four wrench flats (two wrench flats with I option).BD SQ13424X RT THREAD2413SN*+ STROKEXTTN3X NT THREAD4 BASIC CYLINDER DIMENSIONS13424X DIA THRURTFERC, RR, RRC (Includes RR & RC) RR & RR & RRC4X AA THREADEACH MOUNTING STYLERM1 + DIARM+ + DIA*1" AND 1-1/8" BORE: WITH PORT POSITION #3 ADD in WITH PORT POSITION #2 OR #4 & PORT CONTROLS ADD inWA BOTH ENDSDIMENSIONS: SERIES DAV, DHV, DA DOUBLE ROD; 3/4", 1", 1-1/8" BORE All dimensions are reference only unless specifically COMMON TO ALL SERIESBORE SIZELETTER DIMENSIONAABDDDBDFDNEFTNTRRMRTTFTNUBUFWA XY3/4# # x x # # x x # # x x DA CYLINDERSBORE SIZELETTER DIMENSIONAMKMLBPRM1 SDSNVW1 XBXTZBZGZR3 DAV CYLINDERSBORE SIZELETTER DIMENSIONAMKMLBPRM1 SDSNVW1 XBXTZBZGZR3 DHV CYLINDERSBORE SIZELETTER DIMENSIONAMKMLBPRM1 SDSNVW1 XBXTZBZGZR3 POSITIONS: INDICATED BY CIRCLED NUMBERSCUSHIONS: ADD in TO ALL (+ STROKE) DIMENSIONS FOR EACH CUSHIONSHOCK PADS: ADD in TO ALL (+ STROKE) DIMENSIONS FOR EACH SHOCK PADSPRING RETURN: ADD AN ADDITIONAL STROKE LENGTH TO ALL (+ STROKE) DIMENSIONS (2 x STROKE)F (MS8) MTG: 3/4" BORE UNITS ORDERED WITH AN OVERSIZE PISTON ROD WILL HAVE MTG.

9 TABS ON THE HEAD END. CONSULT PHD FOR DIMENSIONAL RODS: SEE PAGE 1-67 FOR OVERSIZE ROD (800) 624-85111-62 PHDV3AV, HV, AOPTIONS: SERIES A, AV, HV CYLINDERS; 3/4", 1", 1-1/8" BORECUSHION BLOCKSTANDARD PORT CONTROL AND CUSHION NEEDLE POSITIONSPort Control and cushion needles are located in position 2 on standard cylinders. They may be located at position 4 when specified on all Series A, AV, and HV. PORT CONTROL AND ADJUSTABLE CUSHION COMBINATIONC ushion and Port Control combination arranged in series provides a compact efficient control system for maximum space weight and cost savings. The cushion is activated when the piston extension enters a seal in the cushion block. The remaining volume in the cylinder exhausts past an adjustable needle. A check seal in the adjusting needle is closed during deceleration, but opens to permit full flow for immediate reversing. The cushion seal in the block is an O-ring for air BLOCK STYLEO-RING SEALSEAL RETAINERPORT CONTROL CUSHIONCUSHIONPORT CONTROL 1324D, DRD, DCP, PRPORT CONTROL NEEDLESP, PCCUSHION CONTROLNEEDLESPORT CONTROL ADJUSTABLE CUSHIONPDPCDCPRDRThe exclusive PHD Port Control , based on the meter-out principle, features an adjustable needle and a separate ball check.

10 Both are built into the cylinder end cap and are used to control the speed of the cylinder over its entire self-locking needle has micrometer threads and is adjustable under pressure. It determines the orifice size which controls the exhaust volume. The separate ball check is closed while fluid is exhausting from the cylinder, but opens to permit full flow of PHD Cushions are designed for smooth deceleration at the end of stroke. When the cushion is activated the remaining volume in the cylinder must exhaust past an adjustable needle which controls the amount of dimension pages for dimensional cushion length 1/2"incoming fluids. The PHD Port Control provides the optimum in speed control for small bore cylinders. It saves space and eliminates the cost of installation and fittings for external flow control (800) 624-85111-63 PHDV3AV, HV, AH SQOJTNE SQBD SQURSQ A4X L THREAD DP (DP ON 1-3/8 BORE)N PORT F M THREAD x DP T(3/4, 1, 1-1/8 BORE)4X M THREAD x DP T(1-3/8 BORE)K + STROKE (SEE NOTE 2)C + STROKE (SEE NOTE 2)OPTIONS: SERIES A, AV, HV CYLINDERS; 3/4", 1", 1-1/8" BOREPHD s Rodlok is ideal for locking the piston rod while in a static/ stationary position.