B3019 - Adjustable Metal Deck Ceiling Bolt

1 Concrete InsertsConcrete Inserts196 EatonAll dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise series Pipe Hangers & SupportsSize Range:3/8"-16 thru 3/4"-10 rodMaterial:SteelFunction:For use in Metal deck formed concrete to attachhanger rods. Allows for pre-positioning of hanger rods in pouredconcrete :Plate: Plain Steel. Rod: Electro-Galvanized. ContactCooper B-Line for alternative finishes and By:Part number and finish. Contact customer service forcustom rod - Adjustable Metal Deck Ceiling ABLength CDSteel SizeDesign (mm)in. (mm)in. (mm)in.(mm)Lbs (kN)Lbs. (kg) B3019 -3/83/8"-16 21/2"( )63/8"( )11/4"( )7 11/4" x 10"( x x )730( )80( ) B3019 -1/21/2"-13 21/2"( )61/2"( )11/4"( )7 11/4" x 10"( x x )1350( )99( ) B3019 -5/85/8"-11 21/2"( )63/4"(171. 4)11/4"( )7 11/4" x 10"( x x )2160( )129( ) B3019 -3/43/4"-10 21/2"( )63/16"( )21/4"( )1/4"x 3"x 10"( x x )3230( )238( )DUnderside of anchor boltto bottom of plateThread Size 'A' withThread Length 'C'Steel SizeBDB2499 - Concrete InsertConsult factory for specifications on rod sizes 11/8"-7, 11/4"-6, and 11/2" Recommended LoadsRodEmbedment(In 3000 lb.)

2 ( ) Rock Concrete) (mm)in. (m)lbs. (kN)lbs. (kg)B2499-5/85/8"-11 3"( )31/2"( )1810( ) ( )B2499-3/43/4"-10 3"( )31/2"( )2710( ) ( )B2499-7/87/8"-9 3"( )4"( )3770( ) ( )B2499-11"-8 3"( )4"( )4960( ) ( )Size Range:5/8"-11 thru 11/2"-6 rodMaterial:SteelFunction:Designed to be embedded in concrete to providea point of support for 5/8"-11 thru 11/2"-6 rod or bolt sizes .Finish:Plain anchor bolt with Electro-Galvanized B-Line for alternative finishes and :For rod sizes 3/8"-16 and 1/2"-13, refer to B2501see page By:Part number and rod 11/8"-7, 11/4"-6, and 11/2"-6 consult " Dia.( )198 EatonAll dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise InsertsConcrete InsertsB-Line series Pipe Hangers & SupportsB2501 - Light Duty Spot Insert - hanger ApplicationSize Range:3/8"-16 & 1/2"-13 rodMaterial:SteelStandard Finish: Electro-PlatedApprovals:3/8" & 12" rod sizes are Underwriters Laboratories listed in the USA (UL)and Canada (cUL).

3 Service:Designed to be embedded in concrete for attachment of3/8"-16 & 1/2"-13 hanger :Specify part number and to Install: Locate and nail to form. Pour concrete and stripforms when set. Remove color coded plug, install rod and lockwith jam :Design load is based off of rod sizes. Before installationensure that concrete is sufficient to carry the CouplingAnchor BoltASTM A307 Mounting Hole forSecuring to FormB2501 - DataUL Listed Approx. SizeLbs.(kg)B2501-3/83/8"-16Up to 4 IPS22( )B2501-1/21/2"-13Up to 8 IPS26( )All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise series Pipe Hangers & SupportsConcrete InsertsConcrete InsertsB2500 - Light Duty Spot InsertN2500 - Steel Insert NutA31/4"( )19/16"( )11/2"( )11/4"( )11/4"( )5/16"( ) hanger Rod andNut Not IncludedMaterial Thickness12 Gauge ( )2"( )Material:SteelFunction: Designed to be embedded in concrete to attach 1/4"-20 to7/8"-9 hanger to Install:Attach concrete insert to forms and install reinforcingrods as required.

4 After forms are dismantled, the knockout can beremoved from the insert. The N2500 insert nut can be installed andthe rod fastened to the nut. The rod should touch the inside top ofthe insert but should not be forced further to avoid damaging :Underwriters Laboratories Listed for maximum pipesize 6" (150). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 19 and Manufacturers Standardization SocietyANSI/MSS SP-69 & SP-58, Type : Approx. - 46 Lbs. ( ) By:Part number and finish.(Order N2500 nuts separately).Design Load:Loading based on a straight pull of 600 Lbs. ( ). Note:Before installation ensure that concrete is sufficient tocarry the Range:1/4"-20 through 7/8" :SteelFunction:Designed for use with B2500 spot :Plain or By:Part number and SizeApprox. (kg)N2500-1/41/4"-2014( )N2500-3/83/8"-1613( )N2500-1/21/2"-1312( )N2500-5/85/8"-1111( )N2500-3/43/4"-1011( )N2500-7/87/8"-910( )200 EatonAll dimensions in charts and on drawings are in inches.

5 Dimensions shown in parentheses are in millimeters unless otherwise InsertsConcrete InsertsB-Line series Pipe Hangers & SupportsB3014N - Malleable Iron Insert NutHorizontal Adjustment:For 3/8"-16, 1/2"-13, 5/8"-11 rods - Adjustment is 13/4" ( )For3/4"-10, 7/8"-9 rods - Adjustment is 13/16" ( )2"( )33/8"( )17/8"( )11/4"( )1/2"( )1/2"( )17/8"( )15/8"( )31/4"( )21/4"( )13/16"( )For 3/4"-10 &7/8"-9 Tap Size 'A'For 3/8"-16 thru5/8"-11 Tap Sizes 'A'Tap SizeUL Load*Approx. No.'A'Pipe SizeLbs. (kN)Lbs. (kg)B3014N-3/83/8"-164 730( )22( )B3014N-1/21/2"-138 1350( )22( )B3014N-5/85/8"-1110 1400( )20( )B3014N-3/43/4"-1010 1400( )29( )B3014N-7/87/8"-910 1400( )29( )* When used with B3014 Malleable Iron Range:3/8"-20 through 7/8" :Malleable IronStandard Finish: Plain or Electro-GalvanizedService:Designed for use with the B3014 malleableiron insert shown :Part number and :Malleable IronFunction: Designed to be embedded in concrete to attach 3/8"-16 to7/8"-9 hanger to Install:Attach concrete insert to forms and install reinforcingrods as required.

6 After forms are dismantled, the B3014N nut can beinstalled and the rod fastened to the nut. The rod should touch theinside top of the :Underwriters Laboratories Listed when used withB3014N Insert Nut. Conforms to Federal Specification WW-H-171E &A-A-1192A, Type 18 and Manufacturers Standardization SocietyANSI/MSS SP-69 & SP-58, Type : Approx. - 166 Lbs. ( )Finish:Plain or By:Part number and finish.(Order B3014N nuts separately).Design Load:Design Loads based on B3014N malleable iron insertnut below. Note:Before installation ensure that concrete is sufficient tocarry the - Malleable Iron InsertConcrete InsertsConcrete InsertsAll dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise series Pipe Hangers & SupportsB2505 thru B2508 - Spot InsertStyrofoam FilledEnd CapsChannelSize25/8"( )51/16"( )ChannelEnd CapDesign LoadMax.

7 Pipe Size Approx. (kN)in. (mm)Lbs. (kg)B2505B22B33221200( )10"(250)96( )B2506B32B33321000( )8"(200)88( )B2507B42B33421000( )8"(200)77( )B2508B52B33521000( )8"(200)69( )Material:Steel (Stainless steel available on B2505 only)Standard Finish:Plain or Pre-GalvanizedFunction: Designed to be embedded in concrete to attach 1/4"-20 to7/8"-9 hanger to Install:Attach concrete insert to forms and install reinforcingrods as required. After forms are dismantled, the channel nut can beinstalled and the rod fastened to the nut. The rod should touch theinside top of the :Underwriters Laboratories Listed. Conforms toManufacturers Standardization Society ANSI/MSS SP-69 & SP-58,Type By:Part number and finish. When supporting10" (254mm)pipe, order B2505 Insert with 5/8"-11 channel :For appropriate channel nut selection, see page 17. Beforeinstallation ensure that concrete is sufficient to carry the shownConcrete InsertsConcrete Inserts202 EatonAll dimensions in charts and on drawings are in inches.

8 Dimensions shown in parentheses are in millimeters unless otherwise series Pipe Hangers & SupportsB2503 - Heavy Duty Spot Insert15/8"( )51/2"( )15/8"( )StyrofoamEnd Caps2"( )8"( )12"( )5/32" ( )Dia. Nail Holes Material:SteelStandard Finish:Electro-GalvanizedFunction: Designed to be embedded in concrete where heavy loadsare required in curtain wall applications. Styrofoam end caps preventconcrete seepage into the to Install:Attach concrete insert to forms and install reinforcingrods as required. After forms are dismantled, the channel nut can beinstalled and the rod fastened to the nut. The rod should touch theinside top of the :Conforms to Manufacturers Standardization SocietyANSI/MSS SP-69 & SP-58, Type Load: 5000 Lbs. ( ).Loading based on two N225 channel nuts spaced 3 ( )oncenter and a minimum of 2 ( )from the end of the : Approx. - 42 Lbs. ( )Order By: Part number and finish.

9 Channel nuts are soldseparately, see page 17 for appropriate selection.