Ball valves KHB / KHM - hydac.com

1 13EN up to 500 DN 04 - 50 Model code (also order example)Ball valvesKHB / KHMKHB G 1/2 1112 01 X A SO940 Designation KHB = block type ball valve DN 04-25 KHM = sleeve type ball valve DN 32-50 Type of connection Thread size or pipe outer and type of connectionMaterials Housing, connection adapters 1 = steel 3 = stainless steelBall, control spindle 1 = steel 3 = stainless steel 11 = hardened steelSealing cups 1 = POM 3 = PTFE (max. operating pressure 100 bar) 8 = PEEK 11 = steelControl spindle seals and connection seals 2 = NBR (Perbunan) 3 = PTFE (max. operating pressure 100 bar) 4 = FKM (Viton)Handle 01 = aluminium clamped handle, straight DN 12-50 02 = aluminium clamped handle, cranked DN 12-50 03 = zinc die-cast clamped handle, straight DN 04-10, 13 04 = zinc die-cast bolt-on handle, cranked DN 04-10, 13 06 = steel bolt-on handle, cranked DN 12-50 08 = stainless steel bolt-on handle, cranked 09 = without handle 26 = steel bolt-on handle, cranked, long DN 32-50 Series(determined by manufacturer)Surface protection A = zinc-plated, chrome (VI)-free (standard) ZN = zinc-nickel, chrome (VI)-freeOption TT = O-rings for low temperatures, temperature range from -40 C to +80 C (only for stainless steel version)S0 940 = ball valve with 4 fixing holes ( for switch panel installation)

2 S0 1073 = ball valve with 2 through-boresDelivery for non-standard valves is longer and the price is specificationsType of construction:Block type KHB DN 04 - 25 Sleeve type KHM DN 32 - 50 Types of connection:Light and heavy threaded connection to DIN 2353 Whitworth internal thread to ISO 228 NPT SAEM ounting position:No orientation restrictionsAmbient temperature:-10 C to +80 C Nominal pressure:up to PN 500 / 7250 PSIO perating fluids:Mineral oil to DIN 51524 Part 1 and Part 2 (other fluids on request)Temperature of operating fluid:-10 C to +80 C Type of construction:Shut-off device is a ballWeight:See tableFlow direction:No orientation restrictionsSpare parts:Seal kits available on requestAccessories:All ball valves can be supplied with the following options:Actuator Limit controls LockDimensionsKHBKHM15EN of connectionTypeDNLWRAd1 ILL1 BHh1h2h3SW1SW2 WeightNom. pressure PN[mm][mm][mm][mm][mm][mm][mm][mm][mm][m m][mm][mm][mm][kg][bar]DIN ISO 228 Internal threadKHB-G1/848 G1 G1 G3 G1 G1 G3 G11 G11 G11 2353 Light 2353 Heavy internal threadKHB-06 NPT68 1/4 - 18 3/8 - 18 1/2 - 14 1/2 - 14 3/4 - 14 1 - 11 1/2 1 1/4 - 11 1/2 1 1/2 - 11 1/2 2 - 11 1/2 J 514 UN/UNFI nternal threadKHB-06 SAE68 7/16 - 20 9/16 -18 3/4 - 16 3/4 - 16 1 1/16 - 12 1 5/16 - 12 1 5/8 - 12 1 7/8 - 12 2 1/2 - 12 steelType of connectionTypeDNLWRAd1 ILL1 BHh1h2h3SW1SW2 WeightNom.

3 Pressure PN[mm][mm][mm][mm][mm][mm][mm][mm][mm][m m][mm][mm][mm][kg][bar]DIN ISO 228 Internal threadKHB-G1/848 G1 500 KHB-G1/468 G1 G3 G1 G1 G3 G11 G11 2353 Light 2353 Heavy hole dimensions (SO 940)SW (square spindle)DIN ISO 228 d1 DNSWabMtcG 1/8493120M468G 1/4693120M468G 3/81093622M579G 1/2*1393622M579G 1/216123926M579G 3/420144528M6911G 125144528M6911 DIN 2353 Light Range d1 DNSWabMtc06LR493120M46808LR693120M46810L R893622M57912LR1093622M57915LR12123622M5 7915LR*1393622M57918LR16123926M57918LR*1 393622M57922LR20144528M691128LR25144528M 6911 DIN 2353 Heavy Range d1 DNSWabMtc08SR493120M46810SR693120M46812S R893622M57914SR1093622M57916SR12123926M5 7916SR*1393622M57920SR16123926M57920SR*1 393622M57925SR20144528M691130SR25144528M 6911* reduced boreDIN ISO 228 d1 DNLL1 BHh1h2a bcAG 1 1 3 1/2* 1 3 2353 Heavy Range d1 DNLL1 BHh1h2a bcA08SR4733728 *13864735 *13904735 2353 Light Range d1 DNLL1 BHh1h2a * of through-bore (SO 1073)closedopen18EN parts(Seal kit)KHB, DN 04 - 25 KHM, DN 32 - 50 Seal kitOrder no.

4 = part 04/06 DN 08/10 DN 13 DN 12/16 DN 20 DN 25 DN 32 DN 40 DN 50703 048 703 014 703 046 703 010 703 005 703 004 703 045 701 292 703 007 The parts indicated by numbers in the above drawings are contained in the seal accessories GmbH Hirschbachstr. 2 66280 Sulzbach/Saar Tel.: +49 (0)6897 - 509-01 Fax: +49 (0)6897 - 509-1009 Internet: E-Mail: information in this brochure relates to the operating conditions and applications described. For applications and operating conditions not described, please contact the relevant technical operator is always responsible for determining the product suitability for the specific application. Quantified values for product characteristics are average values for a new product that undergo a time deterioration process. Subject to technical modifications and errors.