BAR.RUST*236 - Brother’s Specialized Coating

1 Oo@o)Or>cut;oa:9 VSa)EF09800 Devoe Coatings is a membet ol the lcl PainE World GroupAdhesion: (ASTM D 4541) - ExcellentSalt Spray Resistance: (ASTM B 117) - ExcellentAbrasion Resistance: (ASTM D 4060) - GoodHumidity Resistance: (ASTM D 2247) - *236 Multi-Purpose Epoxy CoatingCat. # 236 KXXXXC olor: Off White (tintable to light pastel colors only),ready-mixed colorsFinish: Semi-GlossReduction Solvent: T-10 ThinnerClean-up Solvent: T-10 ThinnerWeighUGallon: ( kg/L) - varieswith colorVOC (EPA 2a): (170 g/L) - varieswith colorSolids By Volume (ASTM D 2697 - 7 day): 80%Theoretical Coverage at Mil (25 microns) Dry:1283 sq.

2 ( m2lL)Recommended Film Thickness: mils (100-200microns) dry - mils (147-293 microns) wet.(Make allowances for loss due to overspray & irregularsurfaces.)Service Temperature Limits: 250'F (121"C) dryMinimum Dry Time (ASTM D 1640): At 6 mils (150microns) DFTTo RecoatDry HardVentilation, film thickness, humidity, thinning, and other factors caninfluence the rate of Life: Over 24 months al77"F (25"C) - unopenedHardness (ASTM D 3363. 7 day cure @ 77'F(25"C): 3 HMix Ratio By Volume: 4 (base): 1 (converter) - seemixing : 15 minutes @ 77"F (25"C) - see Life: 4 hours @ 77"F (25"C) & 50% Resistance: (ASTM D 1308 -24hr.))

3 Contact)Excellent. Resists splash and spillage of alkalis, salts,moisture, oils, greases, foodstuffs and detergents, 50%Sodium Hydroxide, 28% Ammonia, 5% TrisodiumPhosphate, 25% Citric Acid,25"/" Lactic Acid, 10%SulfuricAcid, Crude Oil, 10% Hydrochloric Acid,20%Tannic Acid, 5% Sodium Chloride, 10% AmmoniumHydroxide, hours>32t hours17 :!c, <mctofoq>lo=1-z .. eo9(,, lIIIII@oGeneric: Advanced Technology EpoxyGenerhl Description: A high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss Uses: BAR- rust 236 is a true universal coat-ing.

4 Excellent for use on water tanks and any otherwater containment structures otfering cargo, chemical,fuel, and solvent resistance. See the Tank LiningChemical Resistance Table for specific information. Alsoused on structural steel, equipment, piping, and masonryat pulp and paper mills, chemical and fertilizer plants,sewageJreatment plants, tank farms, and on Qualifications: Performance alternate forFederal Specifications Mil-P-232368(SH)-Type | & lVType | & lV, and Class 2. Also used on grain cargo -North England Ind. Health for use on structural surfaces or surfaces wherethere is a possibility of incidental food contact in com-mercial food preparation establishments, food process-ing plants and federally inspected meat and poultryplants.

5 USDA no longer requires or furnishes productcertification :. Low VOC. Outstanding corrosion protection. Suitable for salt & fresh water immersion. Suitable for corrosive environments. Resistant to many solvents and chemicals. Resistant to cathodic disbondment. Lowers cost of surface preparation. Surface tolerant. Good adhesion to damp surfaces and tight rust . Low temperature cure to 0'F (-18'C). Fast dry-to-recoat. Self-priming for steel & masonry substratesLimitations of Use: Exterior exposure will cause a colorchange, early dulling, and loss of gloss, but this doesnot affect protective properties.

6 Epoxy coatings mayyellow during application and cure if exposed to thecombustion by-products of improperly vented fossilfuel burning heaters. Commonly finished with DevoeCoatings DEWHANETU Urethane Enamel for maximumelterior color & gloss l4hoursl0hours lThours