BRAKE SPECIFICATIONS - hendrickson-intl.com

1 Hendrickson Consolidated Certificate of Compliance for Air Actuated Brakes used on Hendrickson INTRAAX and VANTRAAX suspension systems in North :Consolidated Certificate of Compliance for Air Actuated BrakesLIT NO:L809 DATE:May 2007 REVISION:B1 Example interpretations of the table " x 7" HXS using Abex 931-162 at 17,000 GAWR with 30/30 chamber, " slack and " SLR is " x 7" HXS using Abex 931-162 at 20,000 GAWR with 30/30 chamber, " slack and " SLR is " x 7" HXS using Abex 931-162 at 22,000 GAWR with 30/30 chamber, " slack and " SLR is " x 7" HXS using Abex 931-162 at 22,000 GAWR with 30/30 chamber, " slack and " SLR is " x 7" HXS using Abex 931-162 at 17,000 GAWR with 30/30 chamber, " slack and " SLR is " x 7" HXS using Abex 931-162 at 23,000 GAWR with 30/30 chamber, " slack and " SLR is " x 7" HXS using Abex 931-162 at 23,000 GAWR with 30/30 chamber, "slack and " SLR is invalid.

2 " x 7" HXS using Abex 931-162 at 23,000 GAWR with 30/30 chamber, "slack and " SLR is BRAKE CERTIFICATIONL809 BNotes Regarding BRAKE CertificationsFederal Motor Vehicle Standards specify that the original equipment manufacturer (OEM) is responsible for compliance toFederal Motor Vehicle Safety Standard (FMVSS)-121 for air actuated brakes. In the United States, OEMs are self-certifyingto the standard. In Canada, test data must be submitted to Transport Canada either directly or indirectly through theCanadian Transport Equipment Association s (CTEA) BRAKE database (Note - CTEA database is available to CTEA members only). As a service to our customers, Hendrickson Trailer Suspension Systems provides this Consolidated Certificate ofCompliancefor use with Hendrickson INTRAAX and VANTRAAX suspension / axle / BRAKE systems.

3 For every entry inthe table, Hendrickson has data showing compliance to FMVSS-121 requirements. As an additional service to Canadiancustomers who must provide parking test compliance data to Transport Canada, FMVSS/CMVSS-121 parking data is alsoavailable upon request for every table entry. This data is a part of the CTEA database. For certifications other than thoselisted in these tables, please contact Hendrickson BRAKE engineering for an application specific MODELLININGBRAKE RATINGCHAMBER SIZESLACK LENGTHTIRE SLRE ntries in this column indicatethe BRAKE model,size (drum diameter x shoewidth) and identifies theFriction MaterialsStandardsInstitute (FMSI)code for in this column indicate the lining manufacturer sname and liningformula in this column indicatethe lowest andhighest GrossAxle WeightRating (GAWR) in pounds for the given lining given certification isvalid at anyGAWR at orbetween the two stated in this column indicatesize of the airchamber requiredto meet the certifi-cation for thegiven lining first numberis the servicechamber area( ).

4 The second number is theParking Chamberarea # ( ).Rated stroke is listed in [brackets].Entries in this column indicatelength of theslack adjuster ininches required tomeet the certifica-tion for the givenlining that theremay be splitsbetween a givenGAWR and theslack length necessary to meetthe in this column indicatelowest and highest staticloaded radius(SLR) for the tiresin inches for the given lining that theremay be splitsbetween a givenGAWR and thetire SLR range necessary to meetthe certification. WHEN USED WITH:Reading the tables: BRAKE MODELLININGBRAKE RATINGCHAMBER SIZESLACK LENGTHTIRE " 7" HXS ( 4707)Abex931-16217,000 - 22,00022,000 - 23,00030/30[ " stroke] " or " "17" - "WHEN USED WITH:Example: (Always read across the table for valid combinations)Abex17,000 - 20, " or "17" - "3030-197 Abex17,000 - 22, " or "17" - "931-16222,000 - 23, "Carlisle17,000 - 20,00030 " or "17" - "MB-21[ " stroke] BRAKE Pro17,000 - 22, " or "17" - " " " - "Haldex17,000 - 20, or 17" - "2015-2 Haldex17,000 - 23, " or "17" - "2020-1 BRAKE MODELLININGBRAKE RATINGCHAMBER SIZESLACK LENGTHTIRE SLRCONSOLIDATED BRAKE CERTIFICATION2L809 " x 7" Standard Model BRAKE Certificate of ComplianceThis table certifies that the Hendrickson INTRAAX and VANTRAAX suspension / axle / BRAKE system describedbelow complies with the current revision of DOT 49 CFR and Canadian Motor Vehicle SafetyStandards, Service Brakes, Paragraph , and Parking Brakes, Pararagraph , when equipped asnoted.

5 For certifications other than those listed below, please contact Hendrickson BRAKE engineering for an application specific approval. All tests were performed on 112-pound cast " 7"Standard( 4515)WHEN USED WITH:Abex17,000 - 20, " or "17" - "3030-197 Abex17,000 - 22, " or "17" - "931-16222,000 - 23, "Hendrickson 17,000 - 20,00030 " or "17" - "ULTRAA20 [ " stroke]Carlisle17,000 - 20, " or "17" - " " " - "Carlisle17,000 - 20, " or "17" - "CF2000 Carlisle20,000 - 23,00030 " or "17" - "MB-2320,000 - 25,000[ " stroke] "Haldex30/3017" - "301517,000 - 20,000[ " stroke] " or "Haldex17,000 - 23,00030 " or "17" - "2020-1[ " stroke]CONSOLIDATED BRAKE CERTIFICATION3L809 " x 7" HXS BRAKE Certificate of ComplianceThis table certifies that the Hendrickson INTRAAX and VANTRAAX suspension / axle / BRAKE system describedbelow complies with the current revision of DOT 49 CFR and Canadian Motor Vehicle SafetyStandards, Service Brakes, Paragraph , and Parking Brakes, Paragraph , when equipped as certifications other than those listed below, please contact Hendrickson BRAKE engineering for an application specific approval.

6 All test were performed on 112-pound cast drums. Heavy-duty drums are recommended for 25,000-pound MODELLININGBRAKE RATINGCHAMBER SIZESLACK LENGTHTIRE " 7"HXS ( 4707)WHEN USED WITH: BRAKE MODELLININGBRAKE RATINGCHAMBER SIZESLACK LENGTHTIRE SLRCONSOLIDATED BRAKE CERTIFICATION4L809 " x " HXS BRAKE Certificate of ComplianceThis table certifies that the Hendrickson INTRAAX and VANTRAAX suspension / axle / BRAKE system describedbelow complies with the current revision of DOT 49 CFR and Canadian Motor Vehicle SafetyStandards, Service Brakes, Paragraph , and Parking Brakes, Paragraph , when equipped as certifications other than those listed below, please contact Hendrickson BRAKE engineering for an application specific approval. All tests were performed on 123-pound cast ,000 - 20, " or "17" - "3030-19720,000 - 22, "17,000 - 20,00030 "17" - "Abex20,000 - 23,000[ " stroke] " or "17" - "931-16223,000 - 24,00017" - "24,000 - 25,00030 "17" - "Hendrickson17,000 - 23,000[ " stroke] " or "17" - "ULTRAA20 Carlisle17,000 - 20, " or "17" - "MB-2117" - "20,000 - 22,50030 "20" - "Carlisle17,000 - 20,000[ " stroke] " or "17" - "CF2000 Carlisle20,000 - 23, " or "17" - "MB-2323,000 - 25, "Haldex17" - "301517,000 - 20, " or " " "HXS ( 4711)WHEN USED WITH.

7 CONSOLIDATED BRAKE CERTIFICATION5L809 " x " HXS BRAKE Certificate of ComplianceThis table certifies that the Hendrickson INTRAAX and VANTRAAX suspension / axle / BRAKE system describedbelow complies with the current revision of DOT 49 CFR and Canadian Motor Vehicle SafetyStandards, Service Brakes, Paragraph , and Parking Brakes, Paragraph , when equipped as certifications other than those listed below, please contact Hendrickson BRAKE engineering for an application specific approval. All tests were performed using 103-pound cast 15" brakes are usually used with " wheel equipment. Users should review tractor BRAKE configurations to assure correct BRAKE Do not use older Type 24 service chambers rated at " ,700 - 17,00024 " or " " - "[ " stroke]Abexor3030 - 19713,700 - 18,75024 " " - "[ " stroke]17,000 - 20,00030 " or " " - "[ " stroke] BRAKE MODEL1 LININGBRAKE RATINGCHAMBER SIZESLACK LENGTHTIRE " 8-5/8"HXS ( 4710)WHEN USED WITH:CONSOLIDATED BRAKE CERTIFICATION6L809 BAir disc BRAKE Certificate of ComplianceThis table certifies that the Hendrickson INTRAAX and VANTRAAX suspension / axle / BRAKE system describedbelow complies with the current revision of DOT 49 CFR and Canadian Motor Vehicle SafetyStandards, Service Brakes, Par.

8 And Parking Brakes, Par. when equipped as noted. Forcertifications other than those listed below, please contact Hendrickson BRAKE engineering for an applicationspecific Wheel and ValveStem Packaging2. ABS Sensors3. Air ChamberSelection andVehicle BalanceGreat care must be taken in selecting combinations of wheel and valve stem productthat are compatible with air disc brakes . OEM Customers will need to review wheel-endand valve stem packaging with the selected disc BRAKE manufacturer to confirm adequate running clearances. Hendrickson Engineering will assist customers in discussions with the disc BRAKE fully dressed air disc BRAKE suspensions require straight ABS on caliper model, ABS sensing may be via hub-mounted tone rings or rotor-mounted tone air chamber selection is based on the choice of caliper brand and sizes are available if necessary.

9 Trailer OEM customers are encouraged towork with end customers to review mating tractor BRAKE SPECIFICATIONS and determine ifcombined vehicle BRAKE balance is correct for the application. Hendrickson Engineeringwill assist customers in discussions with the disc BRAKE Air disc Application InformationGunite Haldex 430mm RotorHX-6517,000 - 24,00024/3017" - " Knorr Jurid 430mm Rotor539-2917,000 - 23,00018/2417" - " BRAKE MODELBRAKE ROTORLININGBRAKE RATINGCHAMBER SIZETIRE SLRH aldex DB22 CaliperBendix Spicer(Knorr) ADB22 XCaliperWHEN USED contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not reflected.

10 2007 Hendrickson USA, ( Rights) Hendrickson International Corporation (Rights Outside ) All Rights ReservedL809 Rev B 05-07 Trailer Suspension Systems250 Chrysler Drive, Unit #3 Brampton, ON Canada L6S Suspension SystemsAv. Industria Automortriz #200 Parque Industrial Stiva AeropuertoApodaca, , M xico 66600 (52) 81 8288 1300 Fax (52) 81 8288 1301 Trailer Suspension Systems2070 Industrial Place SECanton, OH 44707-2641 ( ) in United States of America