Example: dental hygienist

BUILD IT WITH PROJECT PLAN WOOD-AND-EPOXY TOPPED …

PROJECT plan . BUILD IT WITH. ROCKLER. WOOD-AND-EPOXY TOPPED . jewelry CABINET. BUILD QUESTIONS? Go to or call 800-279-4441. Stock # Item Stock # Item 38942 1/2 x 3 x 48 Quarter Sawn White Oak (3) * 62166 Brusso jewelry Box Lid Support (1). 32258 1/2 x 5 x 48 - Quarter Sawn White Oak (3) * 33783 Half Mortise Small Box Lock (1). 37503 3/4 x 23 x 24 - Quarter Sawn White Oak (1) 70391 Brusso Solid Brass Small Box Stop Hinges (2). 64914 1/4 x 1-1/2 x 24 Walnut (2) * 27755 Solid Brass Knobs (4). 61216 18''-long Live Edge Walnut Slab 30545 No. 6 x 3/4" Solid Brass Screws 65640 MAS Deep Pour Epoxy - Quart Kit ** 32907 3/8" Rare Earth Magnets (4). * If you are using rough sawn lumber, this PROJECT 71795 Brusso Solid Brass jewelry Box Feet calls for board feet of quarter sawn white oak and 2 board feet of walnut. ** Amount of epoxy needed may vary. All items subject to changes in availability. NOTE FROM THE PROJECT DESIGNER AND MAKER. This jewelry cabinet design is nature-inspired, and I took this opportunity to try some new construction ideas.

WOOD-AND-EPOXY TOPPED JEWELRY CABINET BUILD IT WITH ROCKLER PROJECT PLAN BUILD QUESTIONS? Go to www.rockler.com or call 800-279-4441 38942 62166 1/2 x 3 x 48 – Quarter Sawn White Oak (3) *

Tags:

  Cabinets, Plan, Woods, Jewelry, Plan wood, Jewelry cabinet

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of BUILD IT WITH PROJECT PLAN WOOD-AND-EPOXY TOPPED …

1 PROJECT plan . BUILD IT WITH. ROCKLER. WOOD-AND-EPOXY TOPPED . jewelry CABINET. BUILD QUESTIONS? Go to or call 800-279-4441. Stock # Item Stock # Item 38942 1/2 x 3 x 48 Quarter Sawn White Oak (3) * 62166 Brusso jewelry Box Lid Support (1). 32258 1/2 x 5 x 48 - Quarter Sawn White Oak (3) * 33783 Half Mortise Small Box Lock (1). 37503 3/4 x 23 x 24 - Quarter Sawn White Oak (1) 70391 Brusso Solid Brass Small Box Stop Hinges (2). 64914 1/4 x 1-1/2 x 24 Walnut (2) * 27755 Solid Brass Knobs (4). 61216 18''-long Live Edge Walnut Slab 30545 No. 6 x 3/4" Solid Brass Screws 65640 MAS Deep Pour Epoxy - Quart Kit ** 32907 3/8" Rare Earth Magnets (4). * If you are using rough sawn lumber, this PROJECT 71795 Brusso Solid Brass jewelry Box Feet calls for board feet of quarter sawn white oak and 2 board feet of walnut. ** Amount of epoxy needed may vary. All items subject to changes in availability. NOTE FROM THE PROJECT DESIGNER AND MAKER. This jewelry cabinet design is nature-inspired, and I took this opportunity to try some new construction ideas.

2 The design includes one pullout lower drawer, two swing-out drawers and a live-edge walnut and epoxy river top. The box is made from a combination of walnut and quarter sawn white oak. Exposed walnut splines add an accent and strengthen the mitered corners. Both the lower case containing the drawer and the drawer itself feature dovetail joinery, and the drawer has walnut dividers that provide a nice surprise as the drawer opens. Finally, the brass hardware contribute bright highlights. I hope you find your jewelry box to be as special as I do. ~ Chris Schoenberg, Third Coast Craftsman, Watch Third Coast Craftsman's complete PROJECT BUILD video at - WOOD AND EPOXY TOP jewelry CABINET. Exploded View MATERIAL LIST. T x W x L T x W x L. A Lower Case Top/Bottom (2) 1/2 x 7-1/2 x 16" M Swinging Box Divider (1) 1/4 x 1 x 7-1/8". B Lower Case Side (2) 1/2 x 3-1/2 x 8" N Swing Block (2) 3/4 x 3/4 x 2". C Drawer Stop (1) 1/2 x 5/8 x 15" O Swinging Box Spline (16) 1/8 thick, trim to fit D Drawer Side (2) 1/2 x x 2-1/2 x 6-3/4" P Swing Rod Dowel (2) 1/4"-dia.

3 X 4-1/4". E Drawer Front/Back (2) 1/2 x 2-1/2 x 15" Q Top Section Front (1) 1/2 x 2-1/2 x 16". F Drawer Bottom (1) 1/2 x 6-3/8 x 14-1/2" R Top Section Side (2) 1/2 x 2-1/2 x 8". G Long Divider (1) 1/4 x 1-1/2 x 15" S Back (1) 1/2 x 8-1/2 x 16". H Short Divider (2) 1/4 x 1-1/4 x 4" T Top Section Bottom (1) 1/2 x 7-1/4 x 15-1/2". I Magnets (4) 3/8"-dia. U Top (1) 3/4 x 8-5/8 x 17-1/4". J Swinging Box Front/Back (4) 1/2 x 2-1/2 x 7-5/8" V Top Section Divider (2) 1/4 x 1-1/2 x 10-1/2"*. K Swinging Box Side (4) 1/2 x 2-1/2 x 7-1/2" W Top Section Spline (4) 1/8" thick, trim to fit L Swinging Box Bottom (2) 1/2 x 7 x 7-1/8" X Center Divider (1) 3/4 x 3 x 5-3/16". * For the top section divider, trim the length to fit. WOOD-AND-EPOXY TOPPED jewelry CABINET. Front View Back View Side View LOWER DRAWER. The lower drawer features half-blind dovetail corners front and back. The drawer front gets a large chamfer to act as a grab point when extending the drawer outward. The dividers make this drawer perfect for jewelry .

4 The three dividers break the drawer into four compartments. Each divider gets a subtle roundover its top edge. The long divider (G) is mortised into the drawer sides (D) and the short dividers (H) are mortised into the long divider with through tenons that are chamfered. The opposite end of the short dividers are mortised into the drawer back (E). Lastly, two 3/8 round magnets are glued into the bottom edge of the drawer back. These magnets align with the magnets used in the lower case bottom. The bottom has a rabbet on all four sides with tongues that fit into grooves in the sides. LOWER DRAWER DETAILS. Lower Drawer Sides and Back Lower Drawer Dividers and Bottom SWING-OUT BOX. Exploded View Front View Side View MIDDLE CASE CONSTRUCTION. Exploded Front View Exploded Back View LOWER CASE CONSTRUCTION. Side Detail Top Detail TOP CASE CONSTRUCTION. Construction for the top section is similar to the swinging boxes. The front corners receive the same mitered joints with splines. Brass screws are used to secure the sides to the The top section bottom (T) contains a sliding dovetail.

5 This dovetail accepts the top of the center divider. The top section also includes the lock and lid support as well as one of the most prominent features of this PROJECT : the river top. Exploded View Top View TOP CASE CONSTRUCTION. Front View Front -Inside Face Side View Side - Inside Face TOP SECTION BOTTOM AND BACK DETAILS. Bottom Back ATTACHING THE BACK. TOP DETAILS. Watch Third Coast Craftsman's complete PROJECT BUILD video at: Third Coast Craftsman.


Related search queries