Cable Gland Selection Guide - Eversave Tech

1 I-28 IEffective September, 2008 Copyright 2008 PAGE 28 Selection ChartTYPESERIESPAGEMATERIALNON-ARMORED CABLESARMORED CABLESWIREBRAIDTAPEMARINEC2 KXI-35 Brass with nickel-plated brass entryYe sELASTOMER SEALNon-HazardousA2I-29 Brass, fully nickel platedYe s d and e A2FI-30 Brass, fully nickel platedYe sT3 CDSI-31 Brass with nickel-plated brass entryYe sYe sYe sCOMPOUND SEALPXSS2KI-32 Brass with nickel-plated brass entryYes (Tray)COMPOUND SEALULPXB2KX*I-33 Brass with nickel-plated brass entryYes (non-jacketed)PX2KX*I-34 Brass with nickel-plated brass entryYe s* Also ATEX & Marine the enclosure contain aninternal source of ignition?Does the hazardous gasrequire IIC apparatus?

2 Is the area ofinstallation Zone 1Is the volume of the enclosuregreater than 2 cm3? Selection GuideSelection of Cable entry for Ex d fl ameproof enclosure according to electrical installations IEC : Cable must be substantially compact and circular with an extruding bedding, and if any fi lters are used they are Non-Hygroscopic. dm3: 1 cubic decimeter equals approximately 61 cubic d Cable entry with sealing ringEx d Cable entry compound sealing (Apply d or e according to EN 60079-14)Ye sYe sYe sYe sNoNoNoNoCable Gland Selection GuideEffective September, 2008 Copyright 2008 PAGE 29I-29IA2 Industrial Cable GlandUnarmored CableApplications A2 type brass indoor and outdoor Cable Gland for use with all types of unarmored Cable providing mechanical Cable retention and an environmental seal on the Cable outer Designed and tested to BS 6121: Part 1: 1989, meets and surpasses the requirements of EN 50262:1999.

3 Brass grade CuZn39Pb3 (CW614N) to EN12168. Continuous operating temperature range: -60 C to +150 : Gland : Brass, fully nickel plated Seal: Solo LSF Cable type: Unarmored. Sealing technique - Displacement seal concept. Sealing area(s) - outer Accessories: Shroud, locknut, earth tag, entry thread seal, serrated washers (I-38). Adaptors and reducers (I-35 thru I-37). Also avail able in Brass with Nickel Plated finish, Stainless Steel & Aluminum. Brass with nickel plated brass entry replace RA5 with RA7. Aluminum replace RA5 with RA1. 316 Stainless steel replace RA5 with : Ingress Protection - IP66, IP67 & IP68 Deluge Protection - To DTS01.

4 91 CEPEL/INMENRD Approval - EX-023 SAQAS Approval - AUSEX764 Marine Approvals - LLOYDS, DNV, ABSO rdering InformationGable Gland SizeAvailable Entry Threads C Maximum Thread Length E Overall Cable Diameter A Across Flats D Across Corners D Nominal Protrusion Length F Catalog NumberPVC Shroud ReferenceCable Gland Weight (Ozs)StandardOptionMetricNPTM etricNPTNPTMinMaxMaxMax20S/16 1/2 3/4 20S16A21RA5 PVC04 1/2 3/4 3/4 1 1-1/4 1-1/2 1-1/2 2 2-1/2 2 2-1/2 3 2-1/2 3 3-1/2 3-1/2 dimensions in September, 2008 Copyright 2008 PAGE I-30IA2F Flameproof Ex d* & IncreasedSafety Ex e Cable GlandUnarmored CableApplications For use in Zone I, Zone 2, Zone 21 and Zone 22 hazardous area Dual Certified flameproof (Type d )

5 And Increased Safety (Type e ) indoor and outdoor Cable glands. Continuous operating temperature range: -60 C to +130 : Gland : Brass, fully nickel plated Seal: Solo LSF Cable type: Unarmored. Sealing technique - Displacement seal concept. Sealing area(s) - outer Accessories: Shroud, locknut, earth tag, entry thread seal, serrated washers (I-38). Adaptors and reducers (I-35 thru I-37). Integral Entry Thread Seal option available (for this option pre-fix Gland type with R , 25RA2F). Also avail-able in Brass with Nickel Plated finish, Stainless Steel & Aluminum.

6 Brass full nickel plate add suffix -5. Brass nickel plated entry only, add suffix -7. 316 Stainless steel add suffix : CSA - 1211841 CENELEC (ATEX) Certification - SIRA06 ATEX1097X Code of protection category - ATEX II 2 GD Ex d* IIC & Ex e II, Ex nR II, Ex tD A621, Equipment Zone I & 2, Zone 21 & 22 - Gas Groups IIA, IIB & IIC, ATEX IM2, Ex d I, Ex e I. Compliance Standards - EN 60079-0:2004, EN 60079-1:2004, EN 60079-7:2003, EN 60079-15:2003, EN61241-0:2004 EN 61241-1:2004 Ingress Protection - IP66, IP67 & IP68 Deluge Protection - To DTS01 : 91 CEPEL/INMENRD Approval - EX-023 SAQAS Approval - AUSEX764 Marine Approvals - LLOYDS, DNV, ABS* The A2F Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22 provided always that the prevailing code of practice for Selection and installation is observed, IEC 60079-14.

7 See page InformationGable Gland SizeAvailable Entry Threads C Maximum Thread Length E Overall Cable Diameter A Across Flats D Across Corners D Nominal Protrusion Length F NPT Catalog NumberMetric Catalog NumberPVC Shroud ReferenceCable Gland Weight (Ozs)Standard OptionNPTNPTM etricMinMaxMaxMax20S/16 1/2 3/4 20S16A2F1RA5 PVC04 1/2 3/4 3/4 1 25A2F1RA5 PVC09 1-1/4 1-1/2 1-1/2 2 2-1/2 2 2-1/2 63SA2F1RA5 PVC20 3 2-1/2 3 3-1/2 3-1/2 dimensions in.

8 Full nickel plated brass threaded entry - replace RA5 with stainless steel - replace RA5 with PAGE 31I-31 IEffective September, 2008 Copyright 2008 Applications For use in Zone I, Zone 2, Zone 21 and Zone 22 hazardous area TRITON CDS (Compensating Displace-ment seal) T3 CDS Flameproof Ex d and Increased Safety Ex e brass Cable Gland for all types of armored & braided Cable including lead sheathed versions, provides a Flameproof seal on the Cable inner sheath and an en-vironmental seal on the Cable outer flameproof seal: Unique new CDS system, compat-ible with all types of Cable (eliminates Cable damage and cold flow) At the critical Cable sealing point the CDS system protects the Cable inner sheath from any excess force, which is transferred to and absorbed by the internal compen-sator incorporated in the CDS sys-tem Allows the Cable Gland to be tightened face to face every time re-gardless of Cable diameter.

9 Equipped with a unique Reversible Armor Cone and Bi-Directional ArmorClamping Ring which can accommo-date SWA, braided and STA cables. The Cable Gland provides mechani-cal Cable retention, and electrical continuity via armor termination. Continuous operating tempera-ture range of -60 C to +130 : Standard Cable Gland : Brass with Nickel-Plated threaded entry Seal: Solo LSF Cable type: , & Wire Braid. Sealing technique - Unique Compensat-ing Displacement Seal (CDS) System. Sealing area(s) - Inner & outer Accessories: Shroud, locknut, earth tag, entry thread seal, serrated washers (I-38).

10 Adaptors and reducers (I-35). Integral Entry Thread option is avail able. For this option, pre-fix type with R - example: RT3 CDS or : Code of protection category: ATEX II 2/3 GD Ex d* IIC & Ex e II, EX nR II, Ex tD A21 IP66, Equip-ment Zone I, Zone 2, Zone 21 and Zone 22 Gas Groups IIA, IIB, IIC Compliance Standards: Class I, Div. 2, Groups ABCD, Class II, Div. 2, Groups EFG, Enclosure Type 3,4,4X, Class III, Ex d IIC, Ex e II, NEMA 3,4,4X Ingress Protection: IP66, IP67 & IP68* The T3 CDS Cable Gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 and Zone 22 provided always that the pre-vailing code of practice for Selection and installation is observed, IEC 60079-14.