Example: marketing

CAMBRIA 203, 203-FL, 203-CRS, 203-FM - Electrical …

Lumi re DESCRIPTION Type CAMBRIA 203 is a small, low voltage dimmable LED and halogen MR16 Catalog #. luminaire. It is available with a fully adjustable side swivel stem (203, 203-FL), an adjustable center rear swivel (203-CRS) or a stationary rear flush mount Project ( 203-FM ). Side swivel models 203 and 203-FL provide 340 tilt and 360 . rotation. Center rear swivel model CRS provides 200 tilt and 360 rotation. Date Center rear swivel model CRS provides 200 tilt and 360 rotation. Various Comments lenses, louvers and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects. The Lumiere exclusive Siphon Protection System ( ) prevents water from siphoning into the fixture Prepared by through its own lead wires.

ADL032452 July 22, 2016 2 of 3 Specifications and dimensions subject to change without notice. Eaton 18001 East Colfax Avenue Aurora, CO 80011 P: 303-393-1522

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of CAMBRIA 203, 203-FL, 203-CRS, 203-FM - Electrical …

1 Lumi re DESCRIPTION Type CAMBRIA 203 is a small, low voltage dimmable LED and halogen MR16 Catalog #. luminaire. It is available with a fully adjustable side swivel stem (203, 203-FL), an adjustable center rear swivel (203-CRS) or a stationary rear flush mount Project ( 203-FM ). Side swivel models 203 and 203-FL provide 340 tilt and 360 . rotation. Center rear swivel model CRS provides 200 tilt and 360 rotation. Date Center rear swivel model CRS provides 200 tilt and 360 rotation. Various Comments lenses, louvers and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects. The Lumiere exclusive Siphon Protection System ( ) prevents water from siphoning into the fixture Prepared by through its own lead wires.

2 SPECIFICATION FEATURES. Material Hood Mounting Stem Housing, hood and mounting Hood is removable for easy Model 203 and 203-FL include fully stem are precision-machined relamping and accepts up to three adjustable side-mounted swivel stem, from corrosion-resistant billet internal accessories at once (lenses, providing 340 tilt and 360 rotation for stock 6061-T6 aluminum, C360 louvers, filters) to achieve multiple easy aiming. Center rear swivel (203- brass, C932 bronze, C110 copper lighting effects. Model 203, 203-CRS CRS) or stationary rear flush mount or 303/304 stainless steel. & 203-FM : Weep holes prevent water ( 203-FM ) models are also available.

3 And mineral stains from collecting All models include 1/2 NPS threaded Finish on the lens, even in the straight-up male fitting. Stainless steel aim-locking Fixtures constructed from 6061-T6 position. Model 203-FL: The flush lens mechanisms are standard (not available aluminum are double protected design reduces fixture length, by an ROHS compliant chemical minimizes debris collection and on 203-FM ). Lumi re's exclusive Siphon film undercoating and polyester prevents water and mineral stains Protection System ( ) prevents powdercoat paint finish, from collecting on the lens. water from siphoning into the fixture surpassing the rigorous demands through its own lead wires.

4 Of the outdoor environment. A Gasket 203. variety of standard colors are Hardware Housing and hood are sealed with Stainless steel hardware is standard to CAMBRIA . available. a high temperature silicone o-ring provide maximum corrosion-resistance. LED. gasket to prevent water intrusion. Brass, Bronze, Copper or HALOGEN. Stainless Steel Lens Socket Fixtures constructed from brass, Ceramic socket with 250 C Teflon . Tempered glass lens, factory sealed bronze, copper or stainless steel coated lead wires and bi-pin APPLICATIONS: with high temperature adhesive to are left unpainted to reveal the base. ACCENT / FLOOD. natural beauty of the material.

5 Prevent water intrusion and breakage Brass, bronze and copper will due to thermal shock. Electrical patina naturally over time. Remote 12V transformer required (not included). NOTE: initial power draw on LED equipped fixtures is 15. ". [57mm] watts. When sizing transformer use ". ". [114mm] 15 watts per LED fixture. Nominal [57mm]. ". [114mm]. power draw after start up is 6 watts or 10 watts accordingly. Also, LEDs are more voltage sensitive than standard halogen MR16 lamps. The LED module is designed to operate between 10 and ". ". [63mm] [63mm] 13 volts. Any less or more voltage can ". [18mm]. ". [18mm] cause premature failures.

6 203 203-CRS. Lamp ". Halogen lamp not included. LED CERTIFICATION DATA. " [57mm]. [57mm] " UL and cUL Wet Location Listed [96mm] modules are included and are available LM79 / LM80 Compliant in four color temperatures (2700, 3000, ROHS Compliant " 4000, and 5700) and three distributions IP65 Ingressed Protection Rated [114mm]. (spot, narrow, and flood). Both color " temperature and distribution must be ". [63mm]. specified when ordering. Soraa lamp TECHNICAL DATA. ". [18mm] [16mm] 6W LED, L70/60,000 hours at 25 C. compatible (10W Max). 203-FL 203-FM 10W LED, L70/60,000 hoursat 25 C. Low Voltage: 50W Halogen MR16. ORDERING INFORMATION.

7 Sample Number: 203-FL-50MR16-12-NSS. Source Series Construction Voltage Finish (for LED, select from each column and combine). 203=LED of MR16 CAMBRIA ___=Standard Side Swivel Stem, 1/2 NPS 50MR16=50W max. Halogen MR16 (lamp not included) 12=12V Painted Accent Fixture CRS=Center Rear Swivel Stem, 1/2 NPS BK=Black FM=Rear Flush Mount, 1/2 NPS BZ=Bronze 6 LED=6W LED 27=2700K 12=12 Spot FL=Flush Lens, Side Swivel Stem, 1/2 NPS CS=City Silver 10 LED=10W LED 30=3000K 21=21 Narrow VE=Verde 40=4000K 41=41 Wide WT=White 57=5700K. Premium Finish 4 LED=4W LED AM=Amber NBR=Natural Brass 7 LED=7W LED (585-595nm) NCP=Natural Copper NBZ=Natural Bronze NSS=Natural Stainless Steel ADL032452.

8 July 22, 2016. 1 of 3. OPTICAL ACCESSORIES - ORDER SEPARATELY MOUNTING ACCESSORIES - ORDER SEPARATELY. Filters Optical Lenses Optical Louvers ( " Ground Mounting ( " Diameter) ( " Diameter) Diameter). GS01= 1-1/2 x 6-3/4 (38mm x 171mm) cast zinc ground spike. F71 = Peach Dichroic LSL=Linear Spread Lens LVR=45 Hex Cell Louver GS03= 2-3/8 x 6-5/8 960mm x 168mm) aluminum ground spike with integral 12V wiring F72 = Amber Dichroic (elongates standard beam (reduces glare). compartment. Specify powder paint finish (BK,BZ,CS,VE,WT). F73 = Green Dichroic spread). GS04= 1 x 16-1/2 (25mm x 419mm) aluminum ground spike with integral 12V wiring com- F74 = Medium Blue DIF=Diffused Lens partment.

9 Specify powder paint finish (BK,BZ,CS,VE,WT). F75 = Yellow Dichroic (provides even illumination). GS05= 1 x 16-1/2 (48mm x 438mm) black polycarbonate ground spike with 2 -13 height F76 = Red Dichroic OSL=Overall Spread Lens adjustment - requires fixture with extended stem. F77 = Dark Blue Dichroic (increases standard beam GS06= 2 x 10-1/2 ( 51mm x 267mm) plate steel/brass spiral ground spike. F78 = Light Blue Dichroic spread). GS08 = 1-7/8 x 8 (48mm x 203mm) black ABS ground spike. F79 = Neutral Density Dichroic GS13= 3-3/4 x 4-1/2 (95mm x 114mm) brass/stainless steel 3 prong ground spike. F80 = Magenta Dichroic F22 = Red Color Surface / Wall Mounting - specify powder paint finish (BK,BZ,CS,VE,WT).

10 F33 = Blue Color FS1 = 2-7/8 x 4-5/8 (73mm x 117mm) rectagular wall plate or box cover with single 1/2 NPS. F44 = Green Color mounting hole. F55 = Yellow Color FS2 = 2-7/8 x 4-5/8 (73mm x 117mm) rectagular wall plate or box cover with dual 1/2 NPS. F66 = Mercury Vapor mounting holes. RS1= 4-1/2 (144mm) machined aluminum standard round wall plate with single 1/2 NPS. mounting hole. RS2= 4-1/2 (114mm) machined aluminum standard round wall plate with single 1/2 NPS. mounting hole. LAMP OR LED MODULE PLACEMENT TM01= 2-3/16 x 1-1/2 (71mm x 38mm) round mount for installation on trees or other wood surfaces with 1/2 NPS mounting hole.