CASTI Guidebook to ASME Section IX

1 Table of ContentsSubject IndexSearch CASTI Guidebook toWelding Qualifications asme Section IXThird Edition on CD-ROM CASTI Publishing - 114 StreetEdmonton, Alberta T5H 3J7 CanadaTel:(780) 424-2552 Fax:(780) 421-1308E-Mail: Web Site: Guidebook toASME Section IX -Welding Qualifications(Covering the 2001 Code Edition)Third EditionCASTI Guidebook Series - Vol. 2 Michael J. HouleRichard D. McGuireExecutive EditorJohn E. Bringas, By:CCASTICASTI Publishing - 114 StreetEdmonton, Alberta, T5H 3J7, CanadaTel: (780) 424-2552 Fax: (780) 421-1308E-mail: Site: 1-894038-64-9 Printed in CanadaiiiCASTI Guidebook to asme Section IX - Welding Qualifications - Third EditionCASTI PUBLICATIONSCASTI Guidebook SERIES Volume 1 - CASTI Guidebook to asme Section II, & - Materials IndexVolume 2 - CASTI Guidebook to asme Section IX - Welding QualificationsVolume 3 - CASTI Guidebook to asme - Process PipingVolume 4 - CASTI Guidebook to asme Section VIII Div.

2 1 - Pressure VesselsVolume 5 - Plant Project Engineering Guidebook : for Mechanical and Civil EngineersCASTI CORROSION SERIES Volume 1 - Handbook of Cladding TechnologyVolume 2 - Handbook of Stainless Steels & Nickel AlloysVolume 3 - Handbook of Corrosion in SoilsVolume 4 - Corrosion ControlCASTI METALS DATA BOOK SERIES CASTI Metals Black Book - North America Ferrous DataCASTI Metals Black Book - European Ferrous DataCASTI Metals Red Book - Nonferrous MetalsCASTI Metals Blue Book - Welding Filler MetalsFirst printing of Third Edition, January 2002 ISBN 1-894038-64-9 Copyright 1999, 2000, 2001.

3 2002 All rights reserved. No part of this book covered by the copyright hereon may be reproduced orused in any form or by any means - graphic, electronic, or mechanical, including photocopying,recording, taping, or information storage and retrieval systems without the written permission ofthe Guidebook to asme Section IX - Welding Qualifications - Third EditionFROM THE PUBLISHERIMPORTANT NOTICEThe material presented herein has been prepared for the general information of the reader andshould not be used or relied upon for specific applications without first securing competent technicaladvice.

4 Nor should it be used as a replacement for current complete engineering codes andstandards. In fact, it is highly recommended that the appropriate current engineering codes andstandards be reviewed in detail prior to any the material in this book was compiled with great effort and is believed to be technicallycorrect, CASTI Publishing Inc. and its staff do not represent or warrant its suitability for any generalor specific use and assume no liability or responsibility of any kind in connection with theinformation in this book shall be construed as a defense against any alleged infringement of letters ofpatents, copyright, or trademark, or as defense against liability for such MISSIONOur mission at CASTI Publishing Inc.

5 Is to provide industry and educational institutions withpractical technical books at low cost. To do so, each book must have a valuable topic, be current withtoday's technology, and be written in such a manner that the reader considers the book to be areliable source of practical answers that can be used on a regular basis. The CASTI GuidebookSeries to the asme Welding Qualifications Code has been designed to meet these would like to hear from you. Your comments and suggestions help us keep our commitment tothe continuing quality of the CASTI Guidebook Series.

6 All correspondence should be sent to the authors in care of: CASTI Publishing - 114 StreetEdmonton, Alberta, T5H 3J7 Canada,tel: (780) 424-2552, fax: (780) 421-1308E-mail: Web Site: Guidebook to asme Section IX - Welding Qualifications - Third EditionPREFACEThe asme Boiler & Pressure Vessel Code, Section IX is not an easy document to use. I have workedwith Section IX for nearly forty years and have been on the Section IX Subcommittee (SCIX) fornearly thirty years. I have learned a good deal about the difficulties of using Section IX by reviewingthe numerous inquiries received by the Subcommittee IX and during many years of providinginstruction to Code users.

7 I have also learned by working with many other welding and constructioncodes throughout the have always had empathy for the Code users. The Code is not a how-to guide but rather is aminimum set of rules for the qualification of welders and procedures. The Code does not address allaspects of construction activities. It allows the Code user flexibility in the control of qualifications,and therefore the rules are presented in a general have always wanted to write a book about Section IX. Having been on Subcommittee IX longerthan anyone else, I feel compelled to write the book, in part, to preserve the historical perspectiveSection IX.

8 But I also wanted to write the book for the many Code users who have not had theopportunity to attend and benefit from the Subcommittee IX meetings for the past 30 years. I feel Ican give users the basis for a sound understanding of how to use Section Code users are specialists in various crafts and have a sincere desire to do everything IX is just one more set of rules in the paper work trail which must be integrated into theirspecialty. I have prepared this book for those Code users whose specialty is not welding. I hope thebook is presented in a clear and concise manner, so those Code users can walk their way throughsome of their basic welding qualification requirements more easily.

9 This book also has details andinterpretations to provide clarity, even to the experienced Code user. Some Section IX rules,unfortunately, remain hidden in the Interpretations, which may not be readily accessible to thegeneral public. This book looks beyond the specific words of the Code, recalling Interpretations whennecessary, to provide guidance where even a close study may not produce a clear pressure retaining metals by welding was first permitted in the asme Boiler & PressureVessel Codes in 1935. Each code Section committee formed its own rules for the qualification ofwelding procedure specifications and welders.

10 In 1941, Subcommittee IX was formed as a jointcommittee of AWS and asme personnel. The structure of the 1941 edition of Section IX was similarto the current edition. There were sixteen variables for the qualification of welding procedurespecifications (WPS) and four variables for the qualification of the welder s performance. There was amandatory narrative WPS form which required the Code user to fill in the blanks. Those WPS formblanks were sequential and required the Code user to fill in the base metal preparation, cleaning,back gouging, peening, etc.