Castrol TranSynd - Lubricants Online

1 product DataCastrol TranSyndFully Synthetic Automatic Transmission FluidDescriptionCastrol TranSynd can be recommended for all vehicles calling for Dexron III/Mercon or Allison TES 295 and TES 468 ATF'ssuitable for bus and refuse vehicles with automatic thermal and oxidative stability means that the viscosity remains almost constant helping prevent depositsand oil thickening - this extends transmission life and avoids incorrect gear transmission cleanliness under all conditions permits extended oil drain and decreased temperature reduction through reduced friction leads to longer oil and component life and permitsextended drain and decreased power input means fuel savings potential and reduced frictional characteristics gives smoother gear changing at all ambient temperatures and frictional properties improve driving cold flow properties enables faster oil flow to all critical components (eg torque converter, frictionplates, planetary wheels and brake bands)

2 Particularly during cold responsive and comfortable gear change. Minimises 'shift stock' when changing shear stability properties helps retain full transmission performance over whole oil drain lubrication ensures constant level of comfort during gear extreme pressure (EP) and anti-wear performance gives better transmission component protection leadingto longer good seal performance helps avoid oil leakages, reducing repair from chlorine and heavy metals for better environmental compatibility - easier waste oil disposal CharacteristicsNameMethodUnitsCastrol TranSnydDensity @ 15C, RelativeASTM D4052 & ClearViscosity, Kinematic 100 CASTM D445mm PointASTM D97 C-63 Flash Point, COCASTM D92 C235 Viscosity, Kinematic 40 CASTM D445mm /s38 Viscosity IndexASTM D2270 None167 Viscosity.

3 Brookfield @ -40C (75W)ASTM (cP)8500 Page 1 of 2 product Performance ClaimsAllison TES 295, TES 468MB-Approval TE-ML 04D, 14C, 16 MStorageAll packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally toavoid the possible ingress of water and damage to drum markings. Products should not be stored above 60 C, exposedto hot sun or freezing TranSynd24 Sep 2012 Castrol , the Castrol logo and related marks are trademarks of Castrol Limited, used under data sheet and the information it contains is believed to be accurate as of the date of printing.

4 However, no warranty or representation, express or implied, ismade as to its accuracy or completeness. data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advisedto ensure that they refer to the latest version of this data sheet. It is the responsibility of the user to evaluate and use products safely, to assess suitability for theintended application and to comply with all applicable laws and regulations. Material Safety data Sheets are available for all our products and should beconsulted for appropriate information regarding storage, safe handling, and disposal of the product .

5 No responsibility is taken by either BP plc or its subsidiariesfor any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations, or from hazards inherent in the nature of thematerial. All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if yourequire any further Ltd, Wakefield House, Pipers Way, Swindon, SN3 1RE, 2 of 2