CAVITATION PLATE HARDWARE - Glenwood Marine

1 Glenwood Marine -59 (323) 757-3141 DELUXE ADJUSTABLE CAVITATION PLATE HARDWAREThe deluxe kit is furnished with Item #580 bronze chrome pillow transom blocks with 7/8 bronze bushings. The deluxe kit uses the stainless steel control arms (Item #583) which boltthrough the 7/8 control shaft (Item #593). Deluxe kit is also available with staggered stain-less steel control arms. Please accompany order with drilling dimensions on control shaft(use diagram below) and we will drill the shaft at no extra Item Kit 577 Deluxe Kit With Staggered Arm 5787/8 CONTROL SHAFT1 CONTROL SHAFTD rilled and spotfaced to receive our 3/4 stainless control arms.

2 This control shaft isfurnished with our deluxe adjustable platekit. Accompany order with layout on abovediagram to facilitate drilling and Control Shaft 593 Drilled and spotfaced to receive our 3/8 stainless control arms or 7/16 x 1 stain-less control arm. Accompany order with lay-out on above diagram to facilitate drilling Item Control Shaft 3050 7/16 x 1 Control Arm 3060 CAVITATION PLATE HARDWAREGLENWOOD Marine -60- (323) 757-3141 STANDARD CAVITATION PLATESOur CAVITATION plates are adjustable and control the ride to individual preferences.

3 Cavitationplates are made of cad plated steel. Set includes 5/16 chrome brass PLATE bosses, stainlesssteel turnbuckles , pins and clips and HARDWARE for mounting. Sold per Width Transom Angle Item No. 18 9 90 10018 9 12 99 CUSTOM CAVITATION PLATESOur custom CAVITATION plates are made of stainless steel with a satin finish. Set includes 5/16 chrome brass PLATE bosses, stainless steel turnbuckles , pins and clips and HARDWARE for mount-ing. Sold per Width Transom Angle Item No. 18 9 90 46820 6 90 47130 6 90 47418 9 12 46720 6 12 47030 6 12 473 CAVITATION PLATESGLENWOOD Marine -61- (323) 757-3141 TURNBUCKLES1/2 STAINLESS STEEL turnbuckles tainless steel turnbuckle for 3/8 bosses.

4 Easy adjustment and doublelocking nuts for PLATE Boss - Item #472 Minimum Maximum Eye to Eye Eye to Eye MeasurementMeasurement Item 8 797 9 808 10 819 11 8210 12 8311 13 8412 14 8513 15 8614 16 87 THREAD SIZE: 7/16-203/8 STAINLESS STEEL turnbuckles tainless steel turnbuckles for 3/8 bosses. Easy adjustment and doublelocking nuts. Uses PLATE Boss - Item #472 Minimum Maximum Eye to Eye Eye to Eye MeasurementMeasurement Item 8 3001 7 9 30028 10 30039 11 300410 12 300511 13 300612 14 300713 15 300814 16 300915 17 301017 19 301119 20 3012 THREAD SIZE: 1/2-20 Minimum Maximum Eye to Eye Eye to Eye MeasurementMeasurement Item 8 737 9 74 THREAD SIZE: 3/8-245/16 STAINLESS STEEL turnbuckles tainless steel turnbuckles for 5/16 bosses.

5 Allows adjustment to the CAVITATION PLATE for ride comfort andperformance. Uses PLATE Boss - Item #469 Marine -62- (323) 757-3141 BRONZE COMPETITION BOSSESMale bosses for 3/8 machined and available chrome plated or instainless steel and are 2 in Item Chrome 472 STAINLESS STEEL SCREWS5/16 x 1/2 stainless steel screws used to bolt cavitationplate bosses to the STAINLESS STEEL PINS AND CLIPSD escription Item 5/16 Male Boss 476 For 3/8 Male Boss 477 Extra Clip - 5/16 485 Extra Clip - 3/8 486 For connection of turnbuckles to steel pin with Stainless E STEEL PINS AND RINGS5/16 or 3/8 pins withhead and stainless steelring.

6 May be used in placeof the pin and Item 4793/8 478 CONTROL ARMCAST MANGANESESTUDS, NUTS AND WASHERSD rilled and tapped 1/2-20 right handthread. Sturdy construction, precisionmachined and No. Female569 Male570 Cast from 70,000 Manganese Bronze,chrome plated. Machined for 3/4 with 3/8 Item 565 Attach bosses to the transom with these5/16 x 2 studs, nuts and 481 STAINLESS STEEL CLEVISCAVITATION PLATE HARDWAREGLENWOOD Marine -63- (323) 757-3141 CAVITATION PLATE HARDWAREOVAL THRU HULLCAVITATION PLATE HANDLED escription Item 56012 561 Cast oval thru hull fitting for adjustablecavitation plates.

7 Made in 90 and 12 angles for angled position CAVITATION PLATE control handlehas the sector and lever cast of 70,000manganese bronze, chrome plated. Theplunger rod and clevis are stainless is polished and chrome HULL ASSEMBLYM achined, bronze chrome plated. Has a1/2 Seal Only 556 Glenwood Marine -64- (323) 757-3141 CAVITATION PLATE HARDWARECONTROL LEVERCAST MANGANESE BRONZEP recision machined. Available in highlypolished aluminum or cast bronzechrome plated. Fitted with a bronzebushing for 3/4 or 7/8 shaft. Base is1-1/8 x 3-1/16 .ShaftSize Description Item Aluminum polished 5687/8 Bronze chrome 580 TRANSOM PILLOW BLOCKCast from 70,000 Manganese Bronze andis chrome plated.

8 Precision machined for3/4 or 7/8 shaft. Clevis is stainless for1/2 Item (On Clearance) 5637/8 564 STAINLESS CONTROL ARMTo obtain ultimate performance, it issometimes necessary to adjust a portionof the CAVITATION PLATE up or down. Toaccomplish this, these control arms areavailable in staggered lengths. Boltsthrough a 7/8 control shaft. To deter-mine length, measure from bottom ofbarrel to center of eye. Thread size is3/8-24. Uses 3/8 Shaft toCenter of Eye Item 5831 5841-1/8 5911-1/4 5871-3/8 5861-1/2 5881-5/8 5891-3/4 5811-7/8 5822 5852-1/8 5902-1/4 592 Glenwood Marine -65- (323) 757-3141 CAVITATION FOOT CONTROLA llows the driver to control the cavitationplate adjustment with their foot, withoutremoving their hand from the steeringwheel.

9 Includes 7/8 stainless steel shaftkeyed so pedal may be moved. Stringerblocks have 7/8 oil lite bushings. Item CAVITATION PLATE OVERRIDEHOW IT WORKSOn high speed boats, quick accuratesetting of the CAVITATION PLATE is desirablefor safety and best performance. Using a combination Foot Control and ControlHandle with an Override Assembly makessuch adjustment quick and the CAVITATION plates are set bythe hand control to the desired , when quick acceleration isdesired, or when the bow of the boatneeds to be brought down instantly,the foot control can be depressed tooverride the hand control. Whenthe foot control is released the CAVITATION PLATE will return to its initialpre-set use of both a hand and foot pedalcavitation PLATE control adjustment.

10 Stainlesssteel slip joint is furnished for the cavitationhandle, along with spring, collars, aluminumangle and knuckle ASSEMBLYCAVITATION PLATE CONTROLSP edal Width: 5-3/4 Pedal Heigth: 13-7/8 Base Length: 11-5/8 Glenwood Marine -66 (323) 757-3141 CAVITATION PLATE PICKUP KITSTAINLESS STEELThis stainless steel CAVITATION PLATE pickup isused to take water from the CAVITATION platesto the Item complete - (No. 10-AN)537 Pickup only - (No. 10-AN) 538 Thru Hull only - (No. 10-AN) 539 Pickup only - (No. 12-AN) 542 Thru Hull only - (No. 12-AN) 540 WATER HOSEW ater hose for connecting water supply onengine Hose Item 1 2063/4 1-1/8 2051 1-3/8 203 NEOPRENE HIGH PRESSUREHOSE AND FITTINGSUsed for oil and transmission lines.