Example: barber

CBIS ICON Korfil - cbisinc.com

cbis ICON. Korfil . Protection is a concrete idea. cbis / Korfil operates molding facilities in Massachusetts, Ohio and Utah to produce Expandable Polystyrene (EPS). Insulation Inserts that are sold only to Concrete Block Manufacturers. Our products are tested and have been code authorized for use in grouted reinforced Masonry construction. Our company is quality and customer focused to assure conformance to mandated Energy Codes. You're invited to learn more at ICON. Composition and Materials: ICON Inserts are individually ICON Universal Inserts molded from expandable polystyrene in a minimum density for Concrete Masonry of lbs. per cu. ft. Inserts are packaged at the point of manufacture in heat-sealed, clear polyethylene bags. Units Applicable Standards: Description ASTM C 578, Type X, replacing Federal Basic Use: ICON Inserts are molded from expandable Specifications HH-I-524C.

ICON CBIS/KORFIL operates molding facilities in Massachusetts, Ohio and Utah to produce Expandable Polystyrene (EPS) Insulation Inserts that are sold only to Concrete

Tags:

  Coins, Korfil, Cbis, Cbisinc, Cbis icon korfil cbisinc, Icon cbis

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of CBIS ICON Korfil - cbisinc.com

1 cbis ICON. Korfil . Protection is a concrete idea. cbis / Korfil operates molding facilities in Massachusetts, Ohio and Utah to produce Expandable Polystyrene (EPS). Insulation Inserts that are sold only to Concrete Block Manufacturers. Our products are tested and have been code authorized for use in grouted reinforced Masonry construction. Our company is quality and customer focused to assure conformance to mandated Energy Codes. You're invited to learn more at ICON. Composition and Materials: ICON Inserts are individually ICON Universal Inserts molded from expandable polystyrene in a minimum density for Concrete Masonry of lbs. per cu. ft. Inserts are packaged at the point of manufacture in heat-sealed, clear polyethylene bags. Units Applicable Standards: Description ASTM C 578, Type X, replacing Federal Basic Use: ICON Inserts are molded from expandable Specifications HH-I-524C.

2 Specification for Rigid polystyrene. The design of the insert allows it to com- Cellular Polystyrene Thermal Insulation. press so it will fit the cores of all masonry units with just ASTM C 90 Standard Specification for Loadbearing one size. Inserts are placed in the cores of the block at Concrete Masonry Units. the block plant. By placing inserts in blocks, there is a Technical Data: The Thermal Properties tables show the significant improvement in the thermal efficiency of thermal resistance (Rt), including inside and outside air masonry walls. surface resistances of .68 and .17 hr-ft2- F/BTU, respec- Product Advantages: ICON Insulated Blocks: tively, and the U-values for various densities of concrete Eliminate the need for on-site labor to insulate masonry masonry units. See Thermal Properties charts. walls. Physical Characteristics: See Physical Properties chart Insulation R-value does not deteriorate with moisture or below.

3 Aging. Allow space within the cores for the escape of moisture. PHYSICAL PROPERTIES. This space also allows for easy installation of utilities Property Value within the wall. Can be handled by masons just as easily as unin- Typical Density sulated blocks. Thermal Resistance (R) per inch Are cost-competitive when compared to the various of thickness at 75 other methods used to insulate concrete blocks. Water Vapor Permeance per inch Have no effect on the fire rating of conventional of thickness concrete block walls. Water Absorption % Volume < Improve both the dewpoint and sound transmission resistance of ordinary concrete blocks. Flame Spread Rating* < Limitations: Expanded polystyrene products of any type * This numerical flame spread is not intended to reflect hazards presented by this or any other material under actual conditions.

4 Should not be exposed to temperatures in excess of 184 F. ICON Inserts are made from flame-retardant treated Installation expandable polystyrene. Like all foamed plastics, good Preparatory Work: None required. Inserts are placed in fire procedures must be followed during storage and blocks prior to delivery to the job site. Inserts do not affect installation. Inserts give off no toxic products of combus- the handling of blocks so no added labor is involved. tion, except carbon monoxide and carbon dioxide, con- Precautions: During storage and installation, good fire safe- centrations of which are far less than those given off by ty procedures should be followed. Care should be taken to equal volumes of wood products. Expandable poly- make certain all broken or damaged inserts are replaced. styrene contains no fluorocarbons and no formaldehyde.

5 Thermal Properties:*. Standard 2 Core Masonry Units Insulated with ICON Universal Inserts. U-values are based on conventional 3/8 . Mortar Joint Construction, U-value units are Btu/hr/sqft/degF. 6 Inch 2 Core Masonry Unit 8 Inch 2 Core Masonry Unit 10 Inch 2 Core Masonry Unit DENSITY OF CORES EMPTY CORES INSULATED DENSITY OF CORES EMPTY CORES INSULATED DENSITY OF CORES EMPTY CORES INSULATED. BLOCK LBS/FT3 Rt U Rt U BLOCK LBS/FT3 Rt U Rt U BLOCK LBS/FT3 Rt U Rt U. 80 .38 .16 80 .35 .13 80 .33 .12. 95 .41 .19 95 .38 .15 95 .37 .14. 105 .44 .21 105 .41 .17 105 .39 .15. 115 .46 .24 115 .43 .19 115 .41 .17. 125 .49 .27 125 .45 .22 125 .43 .20. 135 .51 .31 135 .48 .25 135 .46 .22. * The R- and U-values presented are based upon 12 Inch Cavity Wall, 4 Inch Outer Wythe, the ASHRAE Series-Parallel Isothermal Planes 12 Inch 2 Core Masonry Unit 3.

6 4 Air Space, 8 Inch 2 Core Block method as detailed in the ASHRAE Handbook of DENSITY OF CORES EMPTY CORES INSULATED DENSITY OF CORES EMPTY CORES INSULATED. BLOCK LBS/FT3 Rt U Rt U BLOCK LBS/FT3 Rt U Rt U Fundamentals, 1993 Edition, Chapter 22, page 80 .32 .11 80 .23 .11 Physical block dimensions were obtained 95 .35 .12 95 .25 .13 from ASTM C 90. Additional information was 105 .38 .14 105 .26 .14 obtained from NCMA Technical Publication TEK 6-2A, 115 .40 .15 115 .27 .15 1996. A complete Engineering Report covering the 125 .42 .17 125 .28 .17 values listed is available upon request. 135 .44 .20 135 .29 .18. Availability and Cost Availability: ICON Universal Inserts are manufactured For further information, contact cbis / Korfil , Inc. under protection of a United States Patent. They are ICON is a registered trademark of CONCRETE BLOCK.

7 Sold only to concrete block manufacturers. Contact a INSULATING SYSTEMS, INC. cbis / Korfil representative for order and delivery information. ICON Inserts are nonproprietary. We hope the information given here will be helpful. It is based on data and knowledge considered to be true Cost: Specific price information is available only through and accurate and is offered for the user's consideration, local block manufacturers. investigation and verification. Nothing contained herein Warranty: ICON Inserts are warranted to meet published constitutes a representation but we do not warrant the specifications at the time of delivery. For further informa- results to be obtained. Please read all statements, rec- tion, contact a cbis / Korfil representative. ommendations or suggestions in conjunction with our Conditions of Sale which apply to all goods supplied by Maintenance: No maintenance is necessary.

8 Us. No statement, recommendation or suggestion is Technical Services: Support is provided by full-time, intended for any use which would infringe any patent or technically-trained cbis / Korfil sales representatives copyright. and technical service personnel, backed by a central research and development department and technical service staff. cbis . Korfil . Protection is a concrete idea. Concrete Block Insulating Systems Box 1000 Freight House Road E-mail: West Brookfield, MA 01585-1000 Fax: Member of NCMA, SPI and EPSMA.


Related search queries