CCSB DOCKET 2012-1 SECTION I - nmfta.org

1 ccsb DOCKET 2012 -1 SECTION I SUBJECT 3 2011 National Motor Freight Traffic association , Inc. Subject 3, Page 1 of 7 Re: fiber optic Cable Staff Contact: Erin N. Topper Telephone (703) 838-8856 Proponent: Commodity Classification Standards Board Present Classification Provisions Item Description Class DRAWING INSTRUMENTS, OPTICAL GOODS OR SCIENTIFIC INSTRUMENTS: subject to item 57670 57770 Cable, lightguide or lightwave, glass fiber, or fiber optic Cable, with plastic or metal sheathing, with or without one or more steel support strands, with or without necessary hardware, on reels, see Note, item 57771, or in boxes, see Notes, items 57772 and 57773 .. 100 57771 NOTE Cable may be shipped on reels provided that the last layer of cable is lagged or that the cable is wrapped between flanges extending full width of wound cable in one of the following methods: 1. With solid fiberboard backed with foam plastic; 2.

2 With a 160-pound minimum, high density polyethylene or polypropylene extruded plastic double-faced sheet having a ribbed or corrugated medium, backed with foam plastic; 3. With solid thermoplastic material, with or without nonplastic fillers, inch minimum thickness, backed with a minimum thickness of inch of open or closed cell foam material; 4. With 4 millimeter high impact polypropylene fluted sheets, heat scored and sealed, having a density of 154 pounds per 1,000 square feet (MSF); 5. With three-layer laminated high density polyethylene board, having a density of 160 pounds per 1,000 square feet (MSF) with a total thickness of millimeters, produced from one single-extruded facing, one double-extruded corrugated medium and one double- extruded facing. All reels must be labeled with two precautionary markings indicating the proper handling procedure for such reels. 57772 NOTE The provisions of Item 680, Sec.

3 1(a), Note 3, do not apply. 57773 NOTE Provisions also apply on cable connectors, splice kits and necessary optical instruments to install cable when shipped with cable. Accessorial equipment not to exceed 15 percent of the weight upon which charges are assessed. ccsb DOCKET 2012 -1 SECTION I SUBJECT 3 2011 National Motor Freight Traffic association , Inc. Subject 3, Page 2 of 7 Proposed Classification Provisions Item Description Class DRAWING INSTRUMENTS, OPTICAL GOODS OR SCIENTIFIC INSTRUMENTS: subject to item 57670 57770 Cable, lightguide or lightwave, glass fiber, or fiber optic Cable, with plastic or metal sheathing, with or without one or more steel support strands, with or without necessary hardware, on reels, see Note, item 57771, or in boxes, see Notes, items 57772 and 57773: Sub 1 Cut to specified length, see Note, item NEW .. 175 Sub 2 Other than cut to specified length as defined in Note, item NEW.

4 100 57771 NOTE No Change. 57772 NOTE No Change. 57773 NOTE Also applies on cable connectors, splice kits and necessary optical instruments to install cable when shipped in same package with cable. NEW NOTE The term 'cut to specified length' embraces fiber optic cable which has been prepared for a specific installation when any damage to the cable will result in a claim for the entire length, and bills of lading and shipping orders are so notated. Shipping containers or packages must also be marked to indicate that any damage will result in a claim for the entire length of cable. Analysis Research Project 1120 Research Project 1120 was initiated in November of 2010 to determine if the current provisions of item 57770, naming fiber optic cable, are reflective of the products current transportation characteristics. During the course of the project, 304 potential shippers or manufacturers of fiber optic cable and 79 associations believed to represent those manufacturers or shippers were mailed questionnaires in February and April of 2011.

5 Of those questionnaires sent, eight companies responded that they manufacture or ship these products, but only three of the eight responses contained useable information relating to shipments via less-than-truckload (LTL) motor carrier. Responses were received from 16 companies who are not involved in the manufacturing or shipping of fiber optic cable. Of the associations contacted, one association forwarded the questionnaire to its membership, while 26 associations responded that their memberships do not manufacture or ship these products. History of Provisions Item 57770 was established as a result of action taken on DOCKET 824, Subject 17 (May, 1982). The proposal originally sought to establish a class 85 for glass fiber lightwave cable. Based on the information from that record, the density ranged from to pcf (no average density was reported) and the value was $ per pound (in 1982 dollars). The proposal also identified the less-than-favorable stowability associated with cable tendered on ccsb DOCKET 2012 -1 SECTION I SUBJECT 3 2011 National Motor Freight Traffic association , Inc.

6 Subject 3, Page 3 of 7 reels, given that the reels, apparently tendered on the flanges, must be blocked and braced within the vehicle, and they could not be tiered. The proposal was approved as modified by establishing the current class 100 and the three attendant Notes, items 57771, 57772 and 57773. These changes first appeared in Supplement 13 to NMF 100-I, effective January 29, 1983. As a result of action taken on DOCKET 911, Subject 9 (February, 1991) the specific term, fiber optic cable, was added to the item description, in the interest of clarification. That change first appeared in Supplement 8 to NMF 100-Q, which became effective on March 30, 1991. Except for amendments to packaging Note, item 57771, the item has remained substantially unchanged to the present. About fiber optic Cable fiber optic cable is manufactured using strands of optically pure glass that is as thin as a human hair. The cable carries digital information for data communications and voice and video networks.

7 fiber optic cable is designed for indoor and outdoor applications, and the size and type of protective coating is reflective of the cable s intended use. ccsb DOCKET 2012 -1 SECTION I SUBJECT 3 2011 National Motor Freight Traffic association , Inc. Subject 3, Page 4 of 7 Shipments of fiber optic Cable ccsb DOCKET 2012 -1 SECTION I SUBJECT 3 2011 National Motor Freight Traffic association , Inc. Subject 3, Page 5 of 7 Transportation Characteristics Density The information of record encompasses 1,102 density observations submitted by shippers and carriers, obtained during ccsb dock surveys and culled from the ccsb s Density Study1. The densities range from to pcf, with an average density of pcf. The frequency distribution is below. Handling and Stowability Based on the information of record, fiber optic cable is most often shipped on reels or in boxes on lift truck skids or pallets, as shown on page 4. When tendered in boxes on pallets, the cable should not present any unusual handling considerations, although extra care and attention may be required due to the fragile nature of the freight, as indicated by the Fragile and Handle With Care labels reportedly on some shipments.

8 Additionally, based on the information submitted, fiber optic cable tendered in boxes on pallets may present some negative stowing considerations, as they may be marked Do Not Double Stack or bear instructions to the carriers not to breakdown the pallets. When tendered on reels, stowing and handling may be less favorable depending on the size and configuration of the reels as shipped. Reels may not provide a regular load-bearing surface, and reels not on pallets may require blocking and bracing (when oriented on flanges). Many reels contain precautionary markings or instructions such as Do Not Lay Reels Flat, Pick Up This Side Only, Do Not Remove From Cradle, Must Remain Upright, Do Not Stack, This Side Up, Use Load Bars, Secure/Lash to Wall, and Do Not Forklift Here. 1 The Density Study is part of an ongoing effort by the ccsb to collect information on actual shipments; it is not tied to any particular research project, nor does it target any particular product category.

9 Carriers that choose to participate in the study periodically submit shipment data captured through their respective freight auditing programs. The data is identified by NMFC item, and only verifiable data points, which include the weight and the dimensions and/or cube of the shipping unit involved, are used. 0% 5% 10% 15% 20% 0% 1% 10% 16% 17% 17% 12% 11% 12% 3% 2% % of Fiigures in Interval Density Intervals (pcf) Frequency Distribution ccsb DOCKET 2012 -1 SECTION I SUBJECT 3 2011 National Motor Freight Traffic association , Inc. Subject 3, Page 6 of 7 One member carrier reported that, due to the large number of claims they had several years ago on fiber optic cable, they implemented a program to instruct drivers and dockworkers to move and load the freight in the same orientation it is when tendered by the shipper. This program has proved to be effective in reducing damage claims for that particular carrier. Liability fiber optic cable, particularly when cut to specified length and tendered on reels, is liable to damage.

10 Cut to specified length means the cable has been prepared for a specific installation. Cable cut to specified length is subject to special damages, the potential liability increases greatly, as any damage to the cable will result in a claim for the entire length. Damaged fiber optic cable that is not cut to specified length will generally result in a claim for only the damaged SECTION . Member carriers report that many shippers are not advising them at time of shipment, on shipping papers or on the packaging when fiber optic cable is cut to specified length; there are currently no such requirements in item 57770. When shipped on reels and not protected with rigid packaging material, fiber optic cable may be more susceptible to damage than when tendered in boxes or on reels covered with protective packaging material that complies with the requirements specified in Note, item 57771. Of the carrier reports received, none contained a claims ratio, but the carriers did indicate that the claims they have are high because any damage to the cable results in a claim for the entire length of cable shipped.