Transcription of Channel Cable Tray - Cooper Industries
1 Standard Straight SectionSnap-OnFitting covers are available. To order, use the cover prefix followed by thefitting description. Ex: 808A - 03 - 90HB1290 , Horizontal Bend, 12 RadiusCovers Part NumberingPrefixExample:80 8 S A - 04 - 144 Detail8 = FlangedStyleS = Snap-On(Aluminum only*)__ = StandardCoverType80 = SolidTrayWidth03 = 3"04 = 4"06 = 6"90 HBCable Channel CoversCable ChannelAll items normal lead timeexcept for those indicatedMaterialA = Aluminum G = Type 1 HDGAFP = Type 2 Pre-GalvanizedSS4 = 304 Stainless SteelSS6 = 316 Stainless SteelItem DescriptionFor Straight Section Cover:Pre-Galv & Aluminum Only.
2 144 = 12 = 10 , HDGAF & Alum72 = 6 ft.*60 = 5 ft.*Insert suffix of fitting to be coveredfrom the fitting s = Horizontal BendHT__ = Horizontal TeeHX__ = Horizontal Cross__VI__ = Vertical Inside Bend__VO__ = Vertical Outside BendMaterial LengthChannel Width - Straight Section Part Numberft(m)in. (mm)in. (mm)in. (mm)3(76)4(101)6 (152)Aluminum (.032) II Pre-Galvanized Steel (20 Ga.) )808P-03-120808P-04-120808P-06-120 Type I Hot Dip Galvanized Steel (18 Ga.) Fastest shipped items Black = Normal lead-time items Red= Normally long lead-time itemsChannel Cable tray - AccessoriesE-8B-Line series Cable tray SystemsEatonAll dimensions in shaded areas are millimeters unless otherwise Cover ClampWrap-Around Cover Clamps are used to securely hold a cover oncable Channel in locations where strong winds can prevail.
3 Furnished as one clamp with hardware. (*) InsertCatalog Widthin. (mm)9(*)-90333(76)9(*)-90344(101)9(*)-90 366(152)Catalog Widthin. (mm)9(*)-90233(76)9(*)-90244(101)9(*)-90 246(152)Combination Hold-Down & Cover ClampThis clamp is used to hold both the Cable channeland cover in place at the same time. Furnished as one clamp. Order 1/4" hardware separately. (*) InsertAGPSS4SS6 AGPSS6