CHECKLIST - Medivators

1 CHECKLISTDAILY START UPTASKRATIONALE/ACTION1. Verify machine is ADVANTAGE PLUS endoscope reprocessor should not be unplugged during normal Open water shut-off valve to the incoming water provide incoming water flow. Confirm that the incoming water pressure is at least 40 Ensure the Server and LIO (Logic Input / Output) programs are not, start Server/Services in the MDS/ADV folder first, then Check all O-rings on connector manifolds are present and any missing O-rings. If damaged, call Medivators Technical Support at Inspect connector blocks for wear and of connectors and tubing for wear and tear will help to prevent alarms and ensure optimal fluid flow through SHUTDOWNTASKRATIONALE/ACTION1. Close water shut-off valve, except when waterline disinfection is being water shut-off valve to protect facility and filter Wipe down basins and not use scouring Keep lids foot pedal or control panel to open Remove basin drain screen and filter with hook; and clean the basin drain screen and filter of any Lubricate O-rings with silicon oilLubricate channel manifold and hookup O-rings for use and Replace basin drain basin drain screen and filter with hook.

2 Insert new basin drain filter and reattach basin drain Clean reusable spray arm spray arm cap while unit is idle. Remove reusable filter and clean. Put filter back into cap and MONTHTASKRATIONALE/ACTION1. Replace 1 micron and .4 micron water ensure adequate water flow to the ADVANTAGE PLUS endoscope MONTH TASKRATIONALE/ACTION1. Replace micron water filter (bacteria-retentive filter) at least every 6 ensure adequate water flow to the ADVANTAGE PLUS endoscope reprocessor and prevent microorganism growth in the Run Waterline Disinfection after replacing micron bacteria-retentive micron machine disinfection blocks, run water line disinfect program, to destroy any possible microorganisms introduced during filter Replace air filters x 4 (2 on each side).

3 Replace air filters matching color on filter to color on Replace vapor management filter (if applicable).Turn off fan. Open vapor management system lock, remove and replace vapor management filter. Turn fan back Have Annual Preventive Maintenance (PM) performed by Medivators Field Service Engineer (FSE).PMs performed by Medivators FSEs provide inspection and replacement of specified components needed for optimal system performance. 2014 Medivators Inc. All rights reserved. 50097-457/DMEDIVATORS Customer and Technical Support Toll Free: Phone: 1-800-444-4729 Medivators guide, form, CHECKLIST or procedure is designed for use solely as a customer education tool, and is not intended to replace or in any way modify the Medivators User and Service Manuals. While Medivators training may be used in support of a facility s overall competency program, it shall not constitute certification of facility personnel.

4 Medivators shall in no event, be held responsible for a facility s proper performance of endoscope reprocessing protocols or a facility staying current and compliant with ongoing instructional changes or corresponding training updates. Facility owners and operators of Medivators equipment are fully responsible for complying with industry standards and manufacturer s proper use and ADVANTAGE PLUS are registered trademarks of Medivators Inc.