Chemlok - inforubber.com

1 ELASTOMERBUTYLTYPESCHLORO-PRENEEPDMEPICH LORO-HYDRINETHYLENE-ACRYLICFLUORO-CARBON NITRILE(NBR)HNBRADHESIVE SELECTOR GUIDESOLVENTBASED205/252X205/252H205/253 X205/252X205/252H205/256205/253X250205/2 52X205/252H205/238205/253X250X205/233X25 0250X5150205/22051505151205205/220TY-PLY BN205/252X205/252H205/220205/220 EPCA1 SOLVENT205/6100205/6254205/6256205/61002 05/6125205/62206250205/6225205/610062502 05/6125205/6220625051505151205/6100205/6 125205/6220TY-PLY BN205/6220205/6125207/259 AQUEOUS8007/8560S8007/8560D8007/8560S800 7/8560D8007/82108007/81218007/8560S8007/ 8560D8007/8560S8007/8560D610811413061081 1413081108007/8560S8007/8560D8115 ELASTOMERNATURALPOLYACRYLATESBRSILICONE( PEROXIDE)SILICONE(ADDITION)TPE/TPOURETHA NE(CASTABLE)

2 URETHANE(MILLABLE)URETHANE(RIM)URETHANE( TPU)SOLVENTBASED205/220205/252X205/252H2 05/256205/253X250250X205/252X205/252H205 /256205/253X205/220607608Y-1540606487A/B 480 + 442485 + 442213219250250 XTY-PLY BNAP-144213 EPCA1 SOLVENT205/6254205/6256205/6100205/61252 05/6220205/62256250205/6254205/6256205/6 100205/6125205/6220205/6225607608Y-15406 06487A/B480 + 442485 + 4422136250TY-PLY BN219AP-144213 AQUEOUS8007/82108007/8560S8007/8560D6108 1101308007/82108007/8560S8007/8560D 8600 8600610130It s been more than 45 years since Chemlok rubber-to-metal adhesives were first introduced. While muchhas changed during this time, several things remainconstant: the quality of Chemlok adhesives, thestrong commitment to new technologies and theexcellent sales and technical support.

3 Today as1 EPCA refers to Environmentally Preferred Coatings and Also referred to as Chemlok Curative 44from the beginning the Chemlok family isrecognized as the industry leader in rubber-to-metaladhesives. That s why when manufacturers have acritical application that demands a proven rubber-to-metal adhesive, they look to the name they trust Chemlok informationChemlok Values stated in this bulletin represent typical values as not all testsare run on each lot of material produced. For formalized productspecifications for specific product end uses, contact the CustomerService provided herein is based upon tests believed to be as Lord Corporation has no control over the manner inwhich others may use this information, it does not guarantee the resultsto be obtained.

4 In addition, Lord Corporation does not guarantee theperformance of the product or the results obtained from the use of theproduct or this information where the product has been repackagedby any third party including but not limited to any product end does the company make any express or implied warranty ofmerchantability, or fitness for a particular purpose concerning theeffects or results of such additional information, contact Lord Corporationat: 800- Chemlok (800-243-6565), FAX: 814/864-3452 or write: Lord Corporation, Chemical Products,2000 West Grandview Blvd., Box 10038, Erie,PA Division of Lord CorporationMETAL/SUBSTRATEALUMINUMCOPPER /BRASSELECTRO-GALVANIZEDSTEELGLASS/CERAM ICGRIT-BLASTED,DEGREASED STEELNYLONONE-COATADHESIVES213250X625025 2X253X6100TY-PLY BN6076088560S8210213250X62506254TY-PLY BN6076088560S8210250X6250252X61008560S25 0X6250213250X6250252X253X6100TY-PLY BN6076088560S8210250X6250252X61008560 SPRIMERS205207800720520780072052078007AP -13420520780072052078007 METAL/SUBSTRATETEXTILES(NYLON, POLYESTER)

5 PHOSPHATIZEDSTEELSTAINLESS STEELZINC DICHROMATEDMETALSONE-COATADHESIVES233402 X213250X6250252X253X6100TY-PLY BN6076088560S8210250X6250252X61008560S60 7608TY-PLY BN250X6250252X61008560 SPRIMERS 20520780072052078007205207 Cautionary InformationBefore using this or any Lord product, refer to theMaterial Safety Data Sheet (MSDS) and label forsafe use and handling industrial/commercial use only. Must be appliedby trained personnel only. Not to be used in householdapplications. Not for consumer selection of an adhesive primarily dependsupon the type of elastomers being bonded; however,the type of substrate can also affect the adhesivechoice.

6 Below are some suggested adhesives forvarious substrates. The choice of primer andadhesive is dependent upon not only the metal andelastomer but also the cure cycle of the elastomerand the chemical and environmental performancerequired. The adhesive systems shown below aresome of the more common choices. They do notrepresent all possible adhesive system is a registered trademark of Lord Techmark, Inc., a subsidiaryof Lord Corporation. 2003, Lord Corporation PB-2015O POD 6/03