CHERRYMAX RIVET - N2999C

1 CHERRYMAX PATENT NO. 4012984 WARRANTYXWARRANTYATTENTION:Important: Blind fasteners are not always interchangeable with non-blind fasteners. Consult with the aircraft original equipment manufacturer for proper application of this or duplication of the copyrighted document without the expressed written consentof Textron Fastening Systems is prohibited. CR , Cherry , CHERRYMAX , CherryLOCK , A areregistered trademarks of Textron Fastening Systems. 2003 Copyright Textron Fastening SystemsCherry and CHERRYMAX are registered trademarks of Textron s Federal Identification Code-11815 Textron Fastening Systems, a Division of Textron Inc.

2 (hereinafter TFS ).hereby warrants to the initial retail customer ( Warrantee ) only that itsproducts wiII be free from defects in material and workmanship, providedthat the products are used in accordance with TFS s instruction as to main-tenance, operation and use. The foregoing warranty is limited to productsthat are in the original container and the duration of the warranty is limitedto 90 days from the date of first use by the Warrantee. This Warrantee s only remedy and TFS s only obligation in the event of adefect or failure in the products, is that TFS will, at its sole option, repair,replace, or rework the products, but in no case shall the cost of the fore-going exceed the invoice price of the products.

3 This Warranty shall be void if any person seeking to make a claim fordefective or failed products fails to notify TFS within thirty (30) days afterreceipt of evidence that the product is defective or has failed, or if said per-son fails to provide TFS with such evidence as is reasonably requestedconcerning the defect or failure, including without limitation, evidence ofthe date of purchase and date of installation. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,EXPRESSED OR IMPLIED, INCLUDING MERCHANTABILITY OR FIT-NESS FOR A PARTICULAR PURPOSE.

4 TFS EXPRESSLY DISCLAIMSLIABILITY FOR ALL INCIDENTAL, CONSEQUENTIAL, OR SPECIALDAMAGES ARISING FROM ANY DEFECT OR FAILURE IN ITS PROD-UCTS. TAF FURTHER DISCLAIMS ALL LIABILITY RESULTING FROMTHE USER S CHOICE OF ITS PRODUCTS FOR ANY PARTICULARAPPLICATION. The properties, strengths, dimensions, installed characteristics and allother information in this catalog is for guidance only to aid in the correctselection of the products described herein and is not intended or impliedas part of the above warranty. All applications should be evaluated by theuser of the products for functional suitability and RIVET FEATURES AND RIVET SELECTIONNUMBERING SYSTEM / HEAD PROPERTIES / GAGES.

5 6 WEIGHT PER 1000 PIECES BY RIVET SIZE ..7 CHERRYMAX RIVET STANDARDS PAGESNOMINAL SHANKUNIVERSAL HEAD ..8100 FLUSH HEAD ..9100 FLUSH SHEAR HEAD (NAS 1097) ..10 OVERSIZE SHANK DIAMETERUNIVERSAL HEAD ..11100 FLUSH HEAD ..12 UNISINK HEAD ..13120 FLUSH HEAD ..14 CHERRYMAX RIVET INSTALLATION & RIVET lNSTALLATION TOOLINGTOOL SELECTION ..19 HAND RIVETERS AND KITS ..20 POWER RIVETERS ..21 SPLIT POWER RIVETERS ..22 PULLING HEADS ..23 EXTENSIONS, ADAPTERS & RIVET FEATURESX The CHERRYMAX RIVET isinserted into the prepared pulling head (installationtool) is slipped over the RIVET sstem. Applying a firm, steadypressure, which seats the rivethead, the installation tool is thenactuated.

6 The pulling head holds therivet sleeve in place as it beginsto pull the RIVET stem into the rivetsleeve. This pulling action causes the stem shear ring toupset the RIVET sleeve and formthe bulbed blind head. The continued pulling actionof the installation tool causes thestem shear ring to shear from themain body of the stem as thestem continues to move thru therivet sleeve. This action allowsthe fastener to accommodate aminimum of 1/16" variation instructure LockingCollar then contacts the DrivingAnvil. As the stem continues tobe pulled by the action of theinstallation tool, the Safe-lock Locking Collar deforms into therivet sleeve head of the RIVET sleeve s bulbed blind head is complete.

7 The Safe-lock LockingCollar fills the RIVET sleeve headrecess, locking the stem andrivet sleeve securely pulling by the installation tool causes the stemto fracture at the break notch,providing a flush, burr-free,inspectable CHERRYMAX RIVET is the most reliable,high strength structural fastener with visualinspectability in the world today. It features the Safe-lock Locking Collar for more reliablejoint integrity. Meets requirements of Rivets consists of four components assembled as a single unit:1. A fully serrated stem with break notch,shear-ring and integral grip adjustment A driving anvil to insure a visible mechanical lock with each fastener A separate, visible and inspectable lockingcollar that mechanically locks the stem tothe RIVET A RIVET sleeve with recess in the head toreceive the locking collarCovered by Patent No.

8 4012984 INSTALLATIONX3 CHERRYMAX RIVET BENEFITSXDRIVING ANVILA driving anvil is part of each CHERRYMAX RIVET Driving Anvil eliminates wear and replacement of expend-able installation tool components, considerably extending thelife of the installation also allows one pulling head to install: 1 8", 5 32", and 3 16" Nominal and Oversize Diameter Rivets. Protruding, 100 Flush and 100 Flush Shear, Unisink, and120 Flush Head Styles All CHERRYMAX RIVET grip lengths All CHERRYMAX RIVET sleeve/stem material combinationsLOCKING COLLAR The CHERRYMAX RIVET features the patented Safe-Lock Locking Collar which enhances joint integrity and Safe-lock Locking Collar is preformed on the stem duringa sub-assembly operation, then deforms into the RIVET sleevehead recess during installation.

9 Locking the RIVET sleeve andstem Safe-lock Locking Collar is visible and inspectable after Safe-lock Locking Collar installs flush with the rivetsleeve Safe-lock Locking Collar has been approved by severalOEM s for use in engine inlets and The CHERRYMAX RIVET is available in both nominal and 1 64"oversize shank diameters and is available in four materialcombinations: 5056 Aluminum Sleeve/Alloy Steel Stem (50 KSI Shear) 5056 Aluminum Sleeve/Cres Stem (50 KSI Shear) Monel Sleeve/Cres Stem (75 KSI Shear) INCO 600 Sleeve/INCO X-750 Stem (75 KSI Shear)TOOLING SIMPLICITYL ightweight, non-shifting installation tools require no access capability with Right Angle and Offset PullingHeads and Extensions for greater reach and Split tools forspecial applications including automation and BLIND HEAD Provides a large bearing surface area on the blind side of thestructure, giving dependable results, even when installed in difficult thin sheet stack-up RIVET SELECTIONXNUMBERING SYSTEMUNIVERSAL(MS20470)For protruding head applicationsAvailable in both nominal & oversize100 FLUSH(MS20426)

10 For countersunk applicationsAvailable in both nominal & oversize100 FLUSH(NAS1097)For thin top sheet, machine countersunk applicationsAvailable in nominal onlyUNISINKA combination flush and protrudinghead for use in very thin top need for in oversize only120 FLUSHA large diameter, shallow flush headproviding a wide bearing area in thintop sheet in oversize onlyCHERRY PART NUMBER EXAMPLE:HEAD STYLESCR3242 6 04 Maximum Grip Length in 16ths of an inch(-04 = 4/16 = 1/4) RIVET Diameter in32nds if an inch(-6 = 6/32 = 3/16 Head StyleOdd number = Protruding HeadEven number = Flush HeadRivet Type & Material Combination(See Pages 7 thru 13) CHERRYMAX Rivet5 CHERRYMAX RIVET SELECTIONXDIAMETERB ulbed CHERRYMAX rivets are offered in 1 8" (-4), 5 32" (-5), 3 16" (-6) and 1 4" (-8) shankdiameters.)