Classic Legend Models - PowaKaddy

1 OWNERS INSTRUCTION GUIDEF reeway andClassic Legend ModelsOFFICIAL CARTSUPPLIERPowaKaddy International LtdSittingbourne Industrial Park, SittingbourneKent ME10 3JH EnglandTel: (01795) 473555 Fax: (01795) 474586E-mail: IndexPage 1 Freeway Assembly 2 Getting to know your 3 Freeway/ Classic Legend with Distance Function ( )Page 4 Freeway with electronic Braking ( )Page 5 Freeeway Sports 6 Freeway Sports Digital Distance 7 Classic Legend 8 Getting to know your Classic 9 Battery Care - All 11 Maintenance All ModelsPage 12 Questions and Answers - All UK Customer Services 01795 473555 Freeway Models Getting to know your Freeway2 When switching on your Freeway, check that the rotary control switch is atzero, the furthest point anticlockwise and then turn on the on/off rocker apply the power slowly by turning the speed control knob in aclockwise direction (away from you).

2 Your PowaKaddy is fitted with a safety cut out that checks themachine to ensure safe operation, should the machine not function on thefirst attempt, disconnect the battery, turn the rocker switch off and therotary control to zero. Connect the battery and proceed as switch off, either use the on/off rocker which when turned on again willresume at the trolleys finishing speed or use the rotary control switch toreduce speed and stop as and enjoy your game, by adjusting the speed to your walkingpace, on flat fairways, leave the machine to travel fold the Freeway for convenient storage fold the upper bag stayupwards towards the upper handle tube, now release both springcatches and fold flat, the last 5cm of travel clicks the hold down catchinto place, if required ease the spring clip forward to assist Freeway is supplied with the wheels engaged and ready to the need arise.

3 It is possible to disengage the wheels to an outerposition in order to free wheel easily. Simply release the yellow pip catch on the wheel and pull the wheel away from the machine until itclicks into the outer note that your Freeway will not work electrically in the outer trolley is supplied factory adjusted to go straight. Should the needarise, there is adjustment available via slots in the front wheel remove the nut covers, losen the nut and adjust as to your specific model instructions for further detailsYour new PowaKaddy Freeway comprises of three parts, the main bodyof the trolley the battery and the the main section flat on thefloor, stand behind the the locking catch beneath the handle by slidingit forward, at the same time lift the main the handle reaches the in use position, the main shaft will click and lock into place.

4 Once both catches have locked into position lower the upper bag stay into the battery into the battery bag supplied. The best way to do this isto lay the battery flat on the floor with the connecting clip downwards andaway from you. Now feed the bag over the battery and fasten the the battery into the moulded battery tray with the connector facing leftor right. Using the strap attached to the battery tray fasten the battery tothe tray firmly. Never allow this strap to hang loose beneath the machinewhile in operation, should it get caught it will cause irreparable that the on/off rocker and the rotary control switches are both insert the T-shaped plug into the socket on the battery, note thatit will only fit one way round, this ensures maximum safety and avoidsreverse.

5 Never lift your Freeway by the handle when in the closed position, thiswill cause undue pressure on the holding Assembly instructions for all Freeway models1 GBEDF ( electronic Distance Function) Models4If you have selected either the Freeway or Classic Legend with EDF youwill need to read the following guidelines in order to get the best fromyour note that this is a factory fitted option and not available after PowaKaddy is fitted with an electronic distance function in order togive you more freedom on the course. With a little practice you will beable to set your machine off to your desired location whilst you relax andconcentrate on your next handle has an additional Green push button to those alreadydescribed on previous pages.

6 After setting up your machine as previously described, turn the on/offrocker switch to on , now you have three choices of distance: 15 metres,30 meters or 45 meters (all approximate). One push of the distancebutton gives the lower distance two presses the middle distance whilstthree presses gives the longest , Pressing the button 4 times will activate a safety cut-out on the EDFsystem; this can be reset by disconnecting the makes perfect, so try the shorter distance first and note thefollowing safety guidelines- NEVER press the EDF button when the trolley is in motion. Practice in an open area away from people or property. Never aim the machine at people or property. Never aim your machine at hills, up or down.

7 Avoid traversing a slope without offering support. Never send your machine where it will go out of sight. Support will be needed on undulating ( electronic Braking System)3If you have chosen the Freeway with EBS ( electronic Braking System)you will need to read the following instructions to get the most from Freeway EBS is fitted with a differential gear box and an additionalRed push button on the differential gear box gives easier manoeuvrability and as anadditional benefit will, with the on/off switch off, stop the machine freewheeling effectively working as a partial Brake button reduces the speed of the trolley giving an effectivedownhill brake. To activate the brake press the button down and holduntil you wish to release the , as soon as the brake button is released the trolley will revert to itsprevious some cases the most effective way of braking will be to tap the brakebutton in Freeway EBS cannot freewheel in normal operation, should youwish to freewheel your machine you will need to relocate both wheelsonto the outer groove of the axle as follows -Depress the yellow pip catch on each wheel and pull the wheeloutwards about 5mm until it clicks into the outer note that your PowaKaddy will not work electrically with thewheels in the outer using the brake before your first round.

8 Get used to the severityof the brake and learn how and when this valuable feature can improveyour caddying note that the EBS system is not available on the standard Freewayor Classic Legend Models as an option after Models GBFreeway Sports Digital Distance ControlYour new Freeway Digital Sport is supplied with a distance function, this allows you to send the machine off to pre determined distances, the following instructions will help you to get the best from this the digital display flashing, press and hold in the rotary controlswitch for about 2 seconds, the display will turn to a flashing F forfunction now release the knob. The F will flash for about 3 seconds,during this period you can press the knob again either once, twice orthree times, each push will be registered by the display with either a 1, 2 or 3.

9 The numbers relate to 15 metres for 1, 30 metres for 2 and 45 metres for 3 (all distances are approximate).The machine will now take itself forward by the desired distance. Duringtravel you can adjust the speed by rotating the rotary control knob or youcan stop the timer function by pressing the knob in once at any a little practice you will be able to set your machine off to yourdesired location whilst you relax and concentrate on your next makes perfect, a bit like golf really, so try the shorter distancefirst and note the following safety guidelines- Practice in an open area away from people or property. Never aim the machine at people or property. Never aim your machine at hills, up or down. Avoid traversing a slope without offering support.

10 Never send your machine where it will go out of sight. Support will be needed on undulating to know your Freeway Digital SportWhen you have connected and secured the battery, the digital displaywill flash 0 ; this indicates that your machine is off but ready for use. Byrotating the rotary control, the numbers in the display will change; thesenumbers are directly related to the speed of the trolley. All the time thatthe display is flashing, no power will reach the rotary control switch also has a pushfunction, a quick push will turn the flashingdisplay into a solid one, practice this in thezero the display solid (not flashing) apply thepower slowly by turning the speed controlknob in a clockwise direction (away from you),you will notice the numbers increase and thetrolley will move forwards, the maximum speedis achieved at speed nine.