Colt Series C300 (Colt 300), C300N (Colt 300N)

1 ES-A-C300/C300 NColt Series C300 (Colt 300), C300N ( colt 300N) Double Check Detector AssembliesSizes: 2 " 10"Job Name Contractor Job Location Approval Engineer Contractor s No. Approval Representative Ames Fire & Waterworks product specifications in customary units and metric are approximate and are provided for reference only. For precise measure-ments, please contact Ames Fire & Waterworks Technical Service. Ames Fire & Waterworks reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Ames Fire & Waterworks products previously or subsequently Extremely Compact Design 70% Lighter than Traditional Designs 304 (Schedule 40)

2 Stainless Steel Housing & Sleeve Groove Fittings Allow Integral Pipeline Adjustment Patented Tri-Link Check Provides Lowest Pressure Loss Unmatched Ease of Serviceability Available with Grooved Butterfly Valve Shutoffs May be Used for Horizontal, Vertical or N Pattern Installations Replaceable Check Disc RubberThe colt C300, C300N Double Check Detector Assemblies are designed to protect drinking water supplies from dangerous cross- connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation , fire line, or industrial processing. The colt C300, C300N may be installed under continuous pressure service and may be subjected to backpressure for non-toxic applications. The colt C300, C300N is used primarily on fire line sprinkler systems when it is necessary to monitor unauthorized use of water. For use in non-health hazard is illegal to use this product in any plumbing system providing water for human consumption, such as drinking or dishwashing, in the United States.

3 Before installing standard material product, consult your local water authority, building and plumbing !NOTICEThe information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this ( colt 300BF)C300 OSY ( colt 300)SpecificationsThe colt C300, C300N Double Check Detector Assemblies shall consist of two independent Tri-Link Check modules within a single housing, sleeve access port, four test cocks and two drip tight shutoff valves. Tri-Link Check shall be removable and serviceable, without the use of special tools. The housing shall be constructed of 304 (Schedule 40) stainless steel pipe with groove end connections. Tri-Link Checks shall have reversible elastomer discs and in operation shall produce drip tight closure against the reverse flow of liquid caused by backpressure or backsiphonage.

4 The bypass assembly shall consist of a meter, which registers in either gallon or cubic measurement, a double check valve assembly and required test cocks. Assembly shall be a colt C300, C300N as manufactured by the Ames Fire & (open)GHJIPA vailable ModelsSuffix: OSY UL/FM outside stem and yoke resilient seated gate valves BFG UL/FM grooved gear operated butterfly valves with tamper switch*OSY FxG Flanged inlet gate connection and grooved outlet gate connection*OSY GxF Grooved inlet gate connection and flanged outlet gate connection*OSY GxG Grooved inlet gate connection and grooved outlet gate connectionAvailable with grooved NRS gate valves consult factory* Post indicator plate and operating nut available consult factory* *Consult factory for dimensionsPressure TemperatureTem per a ture Range: 33 F 140 F ( C 60 C)Maximum Working Pres sure: 175psi ( bar)HAIJGP C DDimensions WeightsConfigurations Horizontal Vertical up N pattern horizontalMaterials Housing & Sleeve: 304 (Schedule 40) Stainless Steel Elastomers.

5 EPDM, Silicone and Buna N Tri-Link Checks: Noryl , Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Bronze Body Nickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless SteelC300 BFG, C300 NBFGC300, C300 NSIZEDIMENSIONSWEIGHTAC (OSY) 2303 4781163 841631 289291 16738211 2546151 2393813 16223133 1633513963147673313 4806187 8479311 1694301 4768221 4565171 843593 16233141 236815972172784333 4857223 4578410233838231 2597181 2470915 16252153 1638617579198906431 21105301 876551 2140443 41137331 4845233 16589131 16332194833091403501598493 41264373 4959611 16170541 81375401 81019277 166971511 16399213 1653849422456925810573 41467453 4116283 16208661676491 21257321 2826175 2273 4705820331 289297 8759211 25461415 16379813 1622313330703278353281 471885 16211311 16943011 16779221 4565157 1639293 16233131 234368318137429737815 16227311 16943115 16811231 2597161 4412915 1625214356753498446361 2927102545127433 161097331 48451911 16500131 16332141 236813159171788423 41086121 431161 2165511 161297401 81019235 165921511 16399183 16462275125351159 Noryl is a registered trademark of SABIC Innovative Plastics.

6 Approvals Approved by the Foundation for Cross-Connection Control and Hydraulic Research at The Unversity of Southern California (FCCCHR-USC) AWWA C551-92 For additional approval information please contact the factory or visit our website at with governing authorities for local installation requirements(**BFG & OSY Only) **CapacityUL/FM Certified Flow CharacteristicsFlow characteristics collected using butterfly shutoff valves. Flow capacity chart identifies valve performance based upon rated water velocity up to 25fps Service Flow is typically determined by a rated velocity of based upon schedule 40 pipe. Rated Flow identifies maximum continuous duty performance determined by AWWA. UL Flow Rate is 150% of Rated Flow and is not recommended for continuous duty. AWWA Manual M22 [Appendix C] recommends that the maximum water velocity in services be not more than 10fps. Horizontal Vertical N - Pattern psi 16 14 12 10 8 6 psi 16 14 12 10 8 6 psi 16 14 12 10 8 6 psi 16 14 12 10 8 6 4 psi 16 14 12 10 8 60 50 100 150 200 250 300 350 gpm0 190 380 570 760 950 1140 1330 lpm 15 fps0 100 200 300 400 500 gpm0 380 760 1140 1520 1900 lpm 15 fps21 2"3"0 300

7 600 900 1200 1500 gpm0 1140 2280 3420 4560 5700 lpm 12 fps6"0 500 1000 1500 2000 2500 gpm0 1900 3800 5700 7600 9500 lpm 10 fps8" psi 16 14 12 10 8 60 100 200 300 400 500 600 700 800 gpm0 380 760 1140 1520 1900 2280 2660 3040 lpm 13 fps4"0 500 1000 1500 2000 2500 3000 3500 gpm0 1900 3800 5700 7600 9500 11400 13300 lpm 10 fps10"NZHZNHZNHNZHNZHNZH*UL Rated Flow*UL Rated FlowRated FlowRated FlowService FlowService FlowPSI DROP (*FRICTION LOSS)PSI DROP (*FRICTION LOSS)*UL Rated FlowRated FlowService FlowPSI DROP (*FRICTION LOSS)PSI DROP (*FRICTION LOSS)PSI DROP (*FRICTION LOSS)PSI DROP (*FRICTION LOSS)*UL Rated FlowRated FlowService Flow*UL Rated Flow*UL Rated FlowRated FlowRated FlowService FlowService FlowES-A-C300/ C300N 1826 2018 Ames Fire & WaterworksUSA: Backflow Tel: (978) 689-6066 Fax: (978) 975-8350 : Control Valves Tel: (713) 943-0688 Fax: (713) 944-9445 : Tel: (905) 332-4090 Fax: (905) 332-7068 America: Tel: (52) 81-1001-8600