Concrete Tilt-Up Gyro Tilt Plus™ System T-49 Gyro Tilt ...

1 79 Visit Us on the Web! E. 350 HighwayKansas City, MO 64138 Division3 Concrete tilt -Upnit # 5011005ncrete tilt -UpGyro tilt Plus SystemGYRO tilt PLUSINSERTT-49 gyro tilt Plus Face Lift InsertThe Dayton/Richmond T-49 gyro tilt Plus Face Lift Insert is a3/4 diameter insert manufactured from high quality steel. Thehot forged head is engaged by the System hardware. Theinsert assembly is complete with plastic void and plastic pro-tected wire base. The insert assembly is easily positionedand tied to the rebar mat and requires no special ! SWL provides a safety factor of approximately 2 to 1 in 2,500 PSI weight : Special inserts are available sized for panel thicknesses other than those listed in the gyro tilt Plus Face Lift Insert Selection ChartStructural Panel Thickness5 5-1/2 6 6-1/4 6-1/2 77-1/4 7-1/2 8 gyro tilt Plus Anchor Length3-3/4 4-1/4 4-3/4 4-3/4 5-1/4 5-3/4 5-3/4 6-1/4 6-3/4 Insert Safe Working Load (Lbs.)

2 8,00010,00012,00012,00013,00015,00015,00 015,000 16,000T-50 gyro tilt Plus HardwareThe Dayton/Richmond T-50 gyro tilt Plus Hardware is designed to accomplish the task of lifting and handling Tilt-Up panels quickly and efficiently. High safe working load, ease of operation and positive ground release provide Tilt-Up gyro tilt Plus Hardware80 Concrete tilt -UpTOLL FREE 800-892-7224 800-821-7735 LOCAL 816-525-3640 FAX 816-525-4533 Division3 Unit # 5011006 Concrete tilt -UpT-49-E gyro tilt Plus Edge Lift InsertT-49-E gyro tilt Plus Edge Lift InsertThe Dayton/Richmond T-49-E gyro tilt Plus Edge Lift Insert is thesame basic insert as the face lift insert, but is furnished withoutthe wire base.

3 This allows the plastic void to be nailed directly tothe panel form. Standard T-49-E insert is 3/4 x 9-1/2 , otherlengths are available on Lift Insert InstallationT-6-A Brace AnchorThe Dayton/Richmond T-6-A Brace Anchor is a 3/4 diametercoil insert designed to be easily positioned and tied into therebar mat of a Tilt-Up panel. The T-6-A anchor is available withplastic dipped, plastic tipped or stainless steel feet with a T-21or T-22 locator plug factory Special Drill-In Lift PlateA-95 Dayton BarT-13 Coil-AnchorThe Dayton/Richmond T-13 Coil-Anchor is a drill-in expansion anchordesigned for use in the floor slabs oftilt-up buildings to attach and anchorwall braces.

4 Each T-13 plug includesthe bolt, one cut washer and onetang. Available in 3/4 diameter x 4-1/2 or 6 lengths as : Insert SWL s are based on approxi-mately a 2 to 1 factor of safety. Lift platedevelops approximately a 5 to 1 factor ofsafety based on a maximum SWL of15,000 of T-13 Drill-In Expansion AnchorsTension or ShearSafe Working Load4 Bolts (2 per each side)8,500 Bolts (3 per each side)15,000 tension safe working load (SWL), as well as themaximum brace load per T-13 Coil-Anchor is shownbelow:Notes: Safe working loads are based on an approximate factor of safety of 2:1. This assumes a minimum slab compressive strength of 2,500 PSI and a properly installed T-13 anchor as detailed SlabThicknessMaximumBrace LoadSWL TensionPer AnchorMinimumTorque Per Anchor6 or thicker9,000 ,400 ft.

5 Us on the Web! E. 350 HighwayKansas City, MO 64138 Division3 Concrete tilt -Upit # 5011007crete tilt -UpT-1 Single Pickup InsertT-2 Double Pickup InsertAvailable in 3/4 or 1 dia. For use as a strong-back provides a factor of safety of approximately2 to 1 in 2,500 PSI Thickness and Safe Working Load Per Insert (Lbs.)Coil BoltDiameter4 5 5-1/2 6 7 8 1-1/44,200 7,0008,40010,200 12,000 13,5001-1/24,700 7,8009,40011,200 12,500 14,000 SWL provides a factor of safety of approximately2 to 1 in 2,500 PSI Thickness and Safe Working Load Per Insert (Lbs.)CoilDiameter4 5 5-1/2 6 7 8 15,400 8,1009,40010,800 13,500 16,0001-1/2 12,600 15,000 18,000 Strongback AttachmentSingle Strongback Insert and BoltDouble Strongback Insert and BoltT-26 Double Swivel Lifting PlateThe T-26 Double Swivel LiftingPlate is designed to be used with1 , 1-1/4 and 1-1/2 diameter coilbolts and to permit a full 360 hor-izontal plane rotation and 180 vertical plane rotation.

6 The duoswivel feature is designed for usewith a single bolt to engage a sin-gle lifting insert. Safe workingload for the 1 unit is approximately 9,000 pounds andfor the 1-1/4 and 1-1/2 units, approximately 13, Swivel Lifting PlateThe Dayton/Richmond T-12 Swivel Lifting Plate consists of aheavy steel casting and a drop-forged ball that is pinned toallow a full 180 swivel. The T-12 lift plate is available in twostyles. The lighter unit isdesigned for 1 bolt diameterand the heavier unit for 1-1/4 and 1-1/2 boltdiameters. 1 bushings are available for theheavy unit, allowing it to be used with thesmaller tilt -UpTOLL FREE 800-892-7224 800-821-7735 LOCAL 816-525-3640 FAX 816-525-4533 Division3it # 5011009ncrete tilt -UpT-14 Tilt-Up Wall BracesThe Dayton/Richmond T-14 Tilt-Up Wall Bracesare all steel, heavy-duty wall braces designed toquickly and easily align and brace Tilt-Up wall pan-els.

7 Rough adjustment of the T-14 braces is eas-ily accomplished by telescoping the pipes to thenearest incremental adjustment is then achieved by simply turningthe brace on the stationary stud. Dayton/Richmondwall braces are available in numerous sizes to pro-vide a continuous range of Tilt-Up panel heights of fiftyfeet or more. Refer to the chart below for Swivel CouplerThe Dayton/Richmond T-17 Swivel Cou-pler is designed to attach standard 1-1/2 diameter knee braces to 2 or 2-1/2 diameter wall Pipe Knee BraceThe Dayton/richmond T-16 Pipe Knee Brace is an all steel,1-1/2 diameter knee brace available in 10 -6 and 14 -6 T-16 knee brace is used in conjunction with the T-17 SwivelCoupler to add strength and stability to standard wall Swivel CouplerT-16 Pipe Knee BraceTilt-Up Pipe Brace Selection ChartTypeDescriptionMinimum & MaximumBrace LengthT-14, B2 Regular Pipe Brace13 -0 to 20 -6 T-14.

8 B-4 Heavy Duty Regular Pipe Brace14 -6 to 23 -6 T-14, B-5 Heavy Duty Long Pipe Brace22 -6 to 39 -0 T-14, B-6 Short Pipe Brace10 -0 to 14 -0 T-14, B-8 Jumbo Brace22 -0 Fixed LengthT-14, B-9 Jumbo Brace with 5 -0 Extension27 -0 Fixed LengthT-14, B-10 Jumbo Brace with 10 -0 Extension32 -0 Fixed LengthT-14, B-11 Tru-Itt Brace25 -6 to 40 -0 T-14, B-12 Jumbo 5-1/2 32 -0 Fixed Length83 Visit Us on the Web! E. 350 HighwayKansas City, MO 64138 Division3 Concrete tilt -Upt # 5011008crete tilt -UpT-66 tilt Bracket Tilt-Up Forming SystemThe tilt Bracket Forming System consists of light-weight, reusable plastic brackets and an adhesivebacked shoe plate.

9 The bracket snaps into the shoeplate that is held firmly to the casting slab by the adhe-sive bracket is available in three sizes and can be uti-lized to fasten vertical or battered form smaller size is 4-7/8 high for 4-7/8 to 6-7/8 form-ing members. The mid size is 7 high for 7 to 9 form-ing members and the large size is 9-3/8 high formembers 9-3/8 to 12 .The System is easy to use and requires no drilling orhole ACA-1000 ConstructionSpray AdhesiveT-66 tilt Bracket Vers-A-Shim High Impact Plastic ShimsVers-A-Shims are molded from an engineered copolymer plastic materialwhich combines high compression strength and superior load bearing surfacecontact characteristics.

10 They assure accurate placement of precast and pre-stressed Concrete walls, floors, architectural and structural Concrete Pre-assembled packages of shimsdesigned for precise placing of large loadbearing precast units. Eliminates correction of elastometric drift. Can be compressed sufficiently at posttensioning to allow load transfer to the grout. 17 pieces; 1/16 thick, heat-sealedtogether on adjacent sides. Peel off shims in 1/16 increments toobtain the correct height Strips Assures accurate placing and leveling of pre-cast panels, Tilt-Up walls, structural and archi-tectural components.