Example: bankruptcy

Condulet Single Gang Device Boxes - 2F Cast Iron …

US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2015 Eaton s Crouse-Hinds Business2F2 FAccessoriessee pages 37 45 Applications:Cast Device Boxes are installed to: Accommodate wiring devices Act as pull Boxes for conductors in aconduit system Provide openings to make splices andtaps in conductors Provide access to conductors formaintenance and future system changes Connect conduit sections FSY Boxes for mounting surface deviceson floor or bench (used with Single gangcovers)Features: Internal green ground screw standard onboxes Suitable for use in wet locations whenused with gasketed covers Mounting lugs standard on most Boxes Tapered threaded hubs (NPT) withintegral bushing Available for surface mounting (withmounting lugs) or flush mounting (withoutmounting lugs) as listed Available as shallow (FS) or deep (FD)configuration.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2015 Eaton’s Crouse-Hinds Business 2F Accessories 2F see pages 37–45 Applications: Cast device boxes are installed to:

Tags:

  Devices, Single, Boxes, Gang, Condulet, Condulet single gang device boxes

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Condulet Single Gang Device Boxes - 2F Cast Iron …

1 US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2015 Eaton s Crouse-Hinds Business2F2 FAccessoriessee pages 37 45 Applications:Cast Device Boxes are installed to: Accommodate wiring devices Act as pull Boxes for conductors in aconduit system Provide openings to make splices andtaps in conductors Provide access to conductors formaintenance and future system changes Connect conduit sections FSY Boxes for mounting surface deviceson floor or bench (used with Single gangcovers)Features: Internal green ground screw standard onboxes Suitable for use in wet locations whenused with gasketed covers Mounting lugs standard on most Boxes Tapered threaded hubs (NPT) withintegral bushing Available for surface mounting (withmounting lugs) or flush mounting (withoutmounting lugs) as listed Available as shallow (FS) or deep (FD)configuration.

2 Use FD if Device to beenclosed exceeds 15/8" in depth Ample wiring room provided in either FSor FD configuration Wide selection of surface or flush coversavailable in three materials (sheet steel,Feraloy , aluminum) Covers for flush mounting extend toconceal the rough plaster line Available in Single gang and multi-gangconfigurations with hubs, and as blankbodies for drilled and tapped openingsStandard Materials: Feraloyiron alloy or copper-freealuminumStandard Finishes: Feraloy electrogalvanized andaluminum acrylic paint Aluminum naturalSize Ranges: Hubs 1/2" to 1"Certifications andCompliances: UL Standard: 514 ANSI Standard: Fed. Spec.: W-C-5860 CSA Standard: No. 18FS & FDSizeCat. #Cat. #1/2 FSR1 FDR13/4 FSR2 FDR2 SizeCat. #Cat. #1/2 FSC1*FDC1 3/4 FSC2*FDC2 1 FSC3 FDC3 SizeCat.

3 #Cat. #1/2 FSL1 FDL13/4 FSL2 FDL2* *Available in sand cast copper-free aluminum addsuffix SCA to Cat. No. Available in sand cast copper-free aluminum addsuffix SA to Cat. Cast Aluminum SizeCat. #Cat. #1/2FS1 SAFSC1 SA3/4FS2 SAFSC2 SA Mounting lugs and ground screw are not offered withstandard die cast aluminum box. For sand castaluminum box with mounting lugs and ground screw,change "SA" in catalog number to "SCA" (Example: FS1 SCA).SizeCat. #Cat. #1/2FS1*FD1 3/4FS2*FD2 1FS3 FD3 With and Without Mounting Lugs forThreaded Rigid and IMC ConduitOptions:DescriptionSuffixFinishes :Corro-free epoxy powder coat- external bodyS752 Corro-free epoxy powder coat- internal and externalS753 Hot dipped galvanizedHDGC ondulet Single gang Device Boxes -Cast Iron or US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2013 Eaton s Crouse-Hinds Business2 FFS & FDSizeCat.

4 # Cat. # 1/2 FSA1 FDA13/4 FSA2 FDA2 SizeCat. # Cat. # 1/2 FSS1*FDD13/4 FSS2*FDD2*1 FSS3 FDD3 SizeCat. #Cat. #1/2 FSCC1 FDCC13/4 FSCC2 FDCC2 SizeCat. #1/2 FSCA13/4 FSCA2 SizeCat. # 3/4 FSSA2 SizeCat. #Cat. #1/2 FSLA1 FDLA13/4 FSLA2 FDLA2*Available in copper-free aluminum; add suffix "SA". Mounting lugs not Inches:SeriesHub SizeabcdFS1/27/817/8111/165/83/47/817/81 11/163/41117/8111/167/8FD1/27/8211/1621/ 25/83/47/8211/1621/23/411211/1621/27/8 Condulet Single gang Device Boxes - Cast Iron or AluminumAccessoriessee pages 37 45 With and Without Mounting Lugs forThreaded Rigid and IMC US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2013 Eaton s Crouse-Hinds Business2 FFS & FDSizeCat. #Cat. #1/2 FSCT1 FDCT13/4 FSCT2*FDCT2*1 FSCT3 FDCT3 SizeCat. #Cat. #1/2 FST1*FDT13/4 FST2*FDT21 FDT3 SizeCat.

5 #Cat. #1/2 FSX1 FDX13/4 FSX2 FDX21 FDX3 SizeCat. # 1/2 FSCD13/4 FSCD2 FSYD escriptionHub SizeCat. # Single face1 FSY311 Double face1 FSY312 FDXC Hub SizeCat. # 3/4 FDXC219*Available in copper-free aluminum; add suffix "SA". 6 Hubs all 3/4" pipe tap. Not avaliable with mounting Inches:FSCT, FSX, FST, FSCDFDXCFSYFSCT, FSX, FST, FSCDS eriesHub SizeabcdFS1/27/817/8111/165/83/47/817/81 11/163/41117/8111/167/8 FSYD escriptionHub SizeabSingle gang , Single face123/4115/16 Single gang , double face123/433/8 Condulet Single gang Device Boxes - Cast Iron or AluminumAccessoriessee pages 37 45 With and Without Mounting Lugs forThreaded Rigid and IMC US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2013 Eaton s Crouse-Hinds Business2 FCondulet Single gang Device Boxes -Cast Iron or AluminumWith and Without Mounting LugsFSDouble FaceSizeCat.

6 # 1/2FS1523/4FS252 Double FaceSizeCat. # 1/2 FSC1523/4 FSC252 Mounting lugs not Inches:Double faceSeriesHub SizeabcFS1/235/1631/811/43/4311/1631/211 /2 Accessoriessee pages 37 45


Related search queries