Example: dental hygienist

Connection Thread: M3, M5, R 1/8 RoHS - Steven …

Applicable TubingSpecificationsPrincipal Parts MaterialGuide 1 Guide 2 ChuckSealGasketRelease button (Light gray)TubeBody (White) materialTubing , PFA, Nylon, Soft nylon(1), Polyurethane 2, , 4, 6 FluidAir/Water (2) 100 kPa to 1 MPa3 MPa 5 to 60 C, Water: 0 to 40 C (No freezing)JIS B0203 (Taper thread for piping), JIS B0205 (Metric coarse thread )Mounting sectionNut sectionWith sealantJIS B0205 (Metric fine thread )Brass parts are all electroless nickel pressure range (3)Proof pressureAmbient and fluid temperatureThreadSeal on the threads (Standard)Copper-free (Standard)BodyStainless steel 303, C3604, PBTC3604 ( thread portion)

Applicable Tubing Specifications Principal Parts Material Guide 1 Guide 2 Chuck Seal Gasket Release button (Light gray) Tube Body (White) O-ring Stud PAT.PEND

Tags:

  Connection, Thread, Rohs, Connection thread

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Connection Thread: M3, M5, R 1/8 RoHS - Steven …

1 Applicable TubingSpecificationsPrincipal Parts MaterialGuide 1 Guide 2 ChuckSealGasketRelease button (Light gray)TubeBody (White) materialTubing , PFA, Nylon, Soft nylon(1), Polyurethane 2, , 4, 6 FluidAir/Water (2) 100 kPa to 1 MPa3 MPa 5 to 60 C, Water: 0 to 40 C (No freezing)JIS B0203 (Taper thread for piping), JIS B0205 (Metric coarse thread )Mounting sectionNut sectionWith sealantJIS B0205 (Metric fine thread )Brass parts are all electroless nickel pressure range (3)Proof pressureAmbient and fluid temperatureThreadSeal on the threads (Standard)Copper-free (Standard)BodyStainless steel 303, C3604, PBTC3604 ( thread portion)

2 Stainless steel 304 POMNBRStudChuck, Guide 2 Release buttonSeal, O-ringPVC, Stainless steel 304, NBRG asketPBTG uide, Guide 1C3604 Guide for 2 Suitable for use with nylon, soft nylon and urethane. Large retaining chuck provides a secure bite, while retaining force is be used for a wide range of pressures from a low vacuum up to a pressure of 1 use of a special profile ensures sealing and reduces resistance when the tube is force for removalWhen the fitting is removed from the tubing, the chuck and collet are released, thus preventing them from biting into the tube to an unnecessary degree.

3 Unique shape allows easy tube when piping in a confined space. The body and the threaded portion can rotate (for positioning to some extent). Stud is electroless nickel plated. Standard with preapplied sealant for R 1/8 thread Optimum piping in less space with 20% reduction of the outside with sealant is specifications(With electroless nickel plated.)Possible to use in vacuum to 100 1) Soft nylon tubing is not compatible with 2) The surge pressure must be under the maximum operating pressure. Note 3) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero to Order (Refer to page 26 for details.

4 18 Miniature One-touch FittingsOne-touch MiniSeries KJApplicable Tubing: 2, , 4, 6 Connection thread : M3, M5, R 1 6:36 PM Page 1 Courtesy of Steven Engineering, Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) socket head male diameter branch diameter run do not attach metal rods or metal pipes. Metal rods or pipes cannot be secured and the fittings will shoot out. Also, if tubes are attached after metal rods or pipes have been attached, the tubes will not hold and may come While pushing down on the rim of the re-lease button, pull out the tube in the direc-tion of the arrow (see illustration.)

5 The release button can also be pushed down with a flat-head screwdriver. How-ever, be careful not to break or damage the release reuse the released tube, cut off the damaged portion of the and Removal of One-touch Mini tightening by hand, tighten further about 1/6 of a turn with a tightening of KJ 02-M3 screw partsBe sure to read before to front matters 58 and 59 for Safety Instructions and pages 13 to 16 for Fittings and Tubing hex. allows thread Connection by using an allen wrench for confined to connect tubes through a to pipe in the same direction from female thread .

6 Most general to change by 90 in a tube fetching direction from One-touch to pipe from male thread such as pressure to change by 90 in a tube fetching direction from One-touch fittings and to size to connect tubes in the same to branch line from female thread in both 90 to connect different sized tubes. Use to connect tubes in both 90 to pipe at right angles to female thread . Most general to connect tubes with size down in both 90 to connect tubes at right to branch line in the same direction from female thread and in 90 male Y to branch line in the same dia.

7 Union Y Y diameter plug-in Y Y of the tube perpendicularly, using caution not to damage its surface. (Use tube cutter TK-1, 2 or 3. Do not cut the tube with cutting pliers, nippers, scissors, etc.) the tube, then slowly push it until it comes to a Then, pull it back gently to make sure that it does not come of tubingUse to branch line with size down in the same to branch line in the same direction from One-touch to branch line with size down in the same direction from One-touch to branch line in the same direction from female to change size of One-touch to plug unused One-touch male elbow allows thread Connection by using a socket wrench for confined One-touch Fitting Series KJK M H KKD MSLQMQRT 4.

8 21 PM Page 1 Courtesy of Steven Engineering, Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) Connector: KJHS traight Union: KJHF emale Connector: KJFH exagon Socket Head Male Connector: KJSA pplicabletubing (mm) x x x x x x x (widthacrossflats)7 10 8 10 10 area(mm2)NylonUrethane 4 10 4 10 (g) Reference dimensions after R thread (mm) x x x x x (widthacrossflats) DNote)7 A area(mm2)NylonUrethane 4 10 x 10 4 10 Mass(g)Applicabletubing (mm) x x x x x (widthacrossflats) 7 810 D 7 area(mm2)NylonUrethane 3 10 Mass(g)Note) D: Max.

9 DiameterNote)Applicabletubing (mm) D 3 410 10 Effective area(mm2)Mass(g)Note) D: Max. diameterNote)<M3, M5> <R 1/8> <M3, M5> <R 1/8> <M3, M5> <R 1/8> <M3, M5> <R 1/8> Reference dimensions after R thread ) D: Max. diameterApplicabletubingApplicabletubing ApplicabletubingApplicabletubingApplicab letubingR 18R 18R 18R 18R 18(With sealant)T (With sealant)2 x applicable tubing20 Series 4:39 PM Page 20 Courtesy of Steven Engineering, Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) Diameter Straight: KJHMale Elbow: KJLU nion Elbow: KJLPlug-in Elbow: KJL<M3, M5>Applicabletubing (mm) D1 area(mm2) Mass(g)Note) D1, D2: Max.

10 DiameterNote)Note)Applicabletubing (mm) x x x x x (widthacrossflats)7 10 7 7 10 10 D area(mm2) 9 (g) x x 6 ) Applicabletubing (mm) DKJL23-00 KJL04-00 KJL06-00 area(mm2) Mass(g) ) D: Max. diameterNote) Applicabletubing (mm) size dModelKJL23-99 KJL04-99 KJL06-99 D1 area(mm2) Mass(g)1 Note) D1: Max. diameterNote)<R 1/8> <M3, M5> <R 1/8>A R 18R 18R 18 Reference dimensions after R thread ) D: Max. diameterApplicable tubingApplicable tubingbApplicable tubinga21 Miniature One-touch Fitting Series KJApplicable tubingApplicabletubingApplicabletubingAp plicablefitting (With sealant)K M H KKD MSLQMQRT 4:39 PM Page 21 Courtesy of Steven Engineering, Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) Elbow: KJLE xtended Male Elbow: KJW<M3, M5>Male Branch Tee: KJT<R 1/8>Applicabletubing (mm) size dModelKJL23-04 KJL23-06 KJL04-06 area(mm2) (g) ) D1: Max.


Related search queries