CONSTANT OY 32 390 - Atlanta Trading

1 CONSTANT OY 32 .. 390 Synthetic oils for sintered metal plain bearingsProduct information eEdition OY oils Resistant to oxidation Synthetic Good viscosity-temperaturebehaviour Lifetime lubrication ofsintered metal plain bearingsProduct data: CONSTANT OY324668100150220390 ColourYellowYellowYellowYellowYellowYell owYellowService temperature range*, C, to160-50 to160-40 to160-40 to160-35 to160-30 to160-30 to160 Density at 20 C, DIN 51 757, g/ml, index, DIN 51 423 pt. 2,20 C, base oil viscosity,DIN 51 562at 40 C; mm2/s, 100 C; mm2/s, VG, DIN 51 519324668100150220 Pour point, DIN ISO 3016, C, approx.< -50< -50< -45< -40< -40< -40< -35*Service temperatures are guide values which depend on the lubricant s composition, the intended use and the application method.

2 Lubricants change their consistency, apparent dynamicviscosity or viscosity depending on the mechano-dynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a : CONSTANT OY oils are technicalproducts free from silicone raw ma-terials for sintered metal plain bear-ings subject to high and low tem-peratures. Due to their special prod-uct formulation and additives, theycover a wide service temperaturerange, offer good anticorrosionproperties, and in many cases caneven be used for lifetime lubricationof sintered metal plain : CONSTANT OY oils are intended foruse in sintered metal plain bearingsin precision engineering, automotiveand electrical applications as well ashousehold appliances. For longerservice life, MIKROZELLA G 8 OY Nor MIKROZELLA G 100 OY Nshould be used as an oil notes: CONSTANT OY oils are applied in avacuum immersion process to fill thepores of sintered metal plain shelf life:The minimum shelf life is approx.

3 36months if the product is stored in theclosed original container in a size:20 lmetal canisterCONSTANT OY 32 .. 390 Safety Data SheetThe data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a readerwith technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selectedproduct. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for ber products are continually improved. Therefore, Kl ber Lubrication reserves the right to change all the technical data in this product information at any time without ber Lubrication M nchen KG, a member of the Freudenberg groupPublisher and Copyright:Reprints, total or in part, are permitted if sourceKl ber Lubrication M nchen KGKl ber Lubrication M nchen KGis indicated and voucher copy is 70 10 47, D-81310 M nchenTel.

4 (0 89) 78 76-0, Telefax (0 89) 78 76-3331. 1 Product name:a) CONSTANT OY 32, b) CONSTANT OY 46,c) CONSTANT OY 68, d) CONSTANT OY 100e) CONSTANT OY 150, f) CONSTANT OY 220g) CONSTANT OY 390 Code-No.:a) 028057, b) 028060, c) 028062, d) 028055,e) 028063, f) 028054, g) ber Lubrication M nchen KGGeisenhausenerstra e 7D-81379 M nchenTelephone: ++49 - 89 - 7876 - 0 telephone exchangeTelefax: ++49 - 89 - 7876 - 333 Emergency telephone no.: ++49 - 89 - 7876 - 0_____2. Composition/information on ingredientsChemical characterization (preparation): synthetic hydrocarbon oilAdditional information: No hazardous ingredients_____3. Hazards identificationNo particular hazards known_____4. First aid measuresAfter inhalation: Not applicableAfter contact with skin: Wash off with soap and plenty of waterAfter contact with eyes: Rinse with plenty of waterAfter ingestion: Do not induce vomiting.

5 Obtain medical attentionAdvice to doctor: Treat symptomatically. If swallowed or in the event ofvomiting, risk of product entering the lungs_____5. Fire-fighting measuresSuitable extinguishing media: water spray, foam, dry powder, carbon di-oxide (CO2)Unsuitable extinguishing media: high volume water jetSpecial hazards: In case of fire the following can be released: Carbonmonoxide, hydrocarbonsSpecial protective equipment for firefighters: Standard procedure forchemical information: Water mist may be used to cool closed contain-ers. In the event of fire and/or explosion do not breathe Accidental release measuresPersonal precautions: Risk of slipping due to leakage/spillage of productEnvironmental precautions: Do not flush into surface water or sanitarysewer systemMethods for cleaning up/taking up: Soak up with inert absorbent material( sand, silica gel, acid binder, universal binder, sawdust).

6 Dispose ofabsorbed material in accordance with the regulationsAdditional information: None_____7. Handling and storageAdvice on safe handling: Avoid formation of aerosolAdvice on protection against fire and explosion: No special precautionsrequiredRequirements on storage rooms and vessels: No special storage condi-tions requiredIncompatible materials: Incompatible with oxidising agents. Do not storetogether with foodFurther information on storage conditions: Store at room temperature inthe original container_____8. Exposure controls/personal protectionAdditional advice on system design: not applicableIngredients and specific control parameters: NoneRespiratory protection: No special protective equipment requiredHand protection: No special protective equipment requiredEye protection: No special protective equipment requiredBody protection: No special protective equipment requiredOther protection measures: No special protective equipment requiredGeneral protection and hygiene measures: Avoid prolonged and/or re-peated contact with skin.

7 Clean skin thoroughly after work; apply skincream. Remove soiled or soaked clothing immediately. Do not inhaleaerosol9. Physical and chemical propertiesForm: liquidColour: yellowOdour:characteristicPour point: < -50 C, DIN ISO 3016 Flash point: > 220 C, DIN ISO 2592 Flammability: not applicableIgnition temperature: not applicableAutoflammability: not applicableLower explosion limit: not applicableUpper explosion limit: not applicableVapour pressure-first: not applicableDensity: approx. 0,84 g/cm , 20 C, DIN 51757 Water solubility: insolublepH value: not applicableKinematic viscosity: approx. 32 mm /s, 40 C, DIN 51562 Further information: None_____10.

8 Stability and reactivityConditions to avoid: Do not heat above flash pointMaterials to avoid: Strong oxidising agentsHazardous decomposition products: None under normal useAdditional information: None_____11. Toxicological informationThe toxicological data has been taken from products of similar toxicity : LD50/oral/rat = > 2 g/kg (literature data)Chronic toxicity : NoneHuman experience : Prolonged skin contact may cause skin irritation Ecological informationInformation on elimination (persistence and degradability): Product is in-soluble in water. May be separated out mechanically in purification plantsBehaviour in environmental compartments: Ecological injuries are notknown or expected under normal useEcotoxic effects: The product has not been tested.

9 Aquatic toxicity is un-likely due to low solubilityAdditional information: Should not be released into the environment_____13. Advice on disposalCode of waste: 130202 Oil wastes (except edible oils, 05 00 00 and 12 00 00); waste engine,gear & lubricating oils; non-chlorinated engine, gear, lubricating oilsDisposal: Dispose of in accordance with your local, state and federalregulations as used oil for reconditioningDispose of contaminated packaging and recommended cleaning: Offerrinsed packaging material to local recycling Transport informationGGVS/GGVE: not applicableADN/ADNR: not applicableIMDG-Code: not applicableICAO/IATA-DGR: not applicableFurther Information: Not classified as dangerous in the meaning of trans-port regulations_____15.

10 Regulatory informationLabelling according to EU-guidelines: The product does not require ahazard warning label in accordance with EC-directives/German regula-tions on dangerous Other informationIssue-department of Safety Data Sheet: Chemical Documentation,Tel.: +49 - 89 - 7876 - 564